SFP-10G-SR-C

Fiber Optic Transceiver by ATGBICS® by Approved Technology

Note: Your Quotation Request will be directed to ATGBICS® by Approved Technology.

The SFP-10G-SR-C from ATGBICS® by Approved Technology is a Fiber Optic Transceiver that has an 850 nm VCSEL transmitter and PIN photodetector. It supports bit rates from 9.95 Gb/s to 11.3 Gb/s for serial optical communication applications. The transmitter section operates at a center wavelength of 850 nm. It has an average optical power from -7.3 dBm to -1 dBm and optical power OMA (Optical Modulation Amplitude) of -1.5 dBm. This fiber optic transceiver (FOT) has a maximum RMS spectral width of 4 nm and minimum extinction ratio of 3.5 dB. It has a maximum relative intensity noise of -128 dB/Hz and minimum optical return loss tolerance of 20 dB.

The SFP-10G-SR-C has a PIN photodetector receiver section that receives a wavelength of 840 nm - 860 nm. It has a maximum receiver sensitivity (OMA) of -11.1 dBm and stressed sensitivity (OMA) of -7.5 dBm. This FOT has a Los assert of -30 dBm (min), Los dessert of -12 dBm (max), and Los hysteresis of 0.5 dBm (min). It has a minimum output rise & fall time of 30 ps and maximum receiver reflectance of -12 dB. This FOT requires a DC supply voltage of 3.3 V, maximum current of 250 mA, and consumes up to 1 W of power. It supports a 2-wire serial interface and is RoHS compliant. This FOT is available in a compact package that measures 57 (L) x 14 (W) x 12.8 (H) mm and is ideal for 10GBASE-SR/SW ethernet, SONET OC-192 / SDH, and 10G fiber channel applications.

Product Specifications

View similar products

Product Details

  • Part Number
    SFP-10G-SR-C
  • Manufacturer
    ATGBICS® by Approved Technology
  • Description
    850 nm Fiber Optic Transceiver for Ethernet & 10G Fiber Channel Applications

Applications

  • Applications
    10GBASE-SR/SW Ethernet, SONET OC-192 / SDH, 10G Fibre Channel
  • Standard Supported
    10GBASE-SR

Connections & Interface

  • Connector
    Duplex LC
  • Interface
    2-wire serial interface

General Parameters

  • Data Rate
    9.95 to 11.3 Gb/s
  • Wavelength
    840 to 860 nm
  • Distance/Reach
    300 m
  • Fiber Modes
    Multi Mode
  • Form Factor
    SFP+
  • Receiver Sensitivity
    -11.1 dBm
  • Power Consumption
    1 W
  • Tx Power
    -7.3 to -1 dBm
  • Tx/Rx Component
    VCSEL(Tx)/PIN(Rx)
  • Supply Current
    250 mA
  • Supply Voltage
    3.135 to 3.465 V
  • RoHs
    Yes
  • Note
    Input differential impedance: 100 Ohms, Humidity: 0 to 85%

Temperature

  • Operating Temperature display
    0 to 70 Degree C
  • Storage Temperature
    -40 to 85 Degree C

Technical Documents

Request a Quote