1.  Home
  2. Whitepapers
  3. Thermoelectric Modules Handling, Packaging, & Ceramic Inspection Instructions

Thermoelectric Modules Handling, Packaging, & Ceramic Inspection Instructions

Download Whitepaper

Thermoelectric Modules Handling, Packaging, & Ceramic Inspection Instructions

Download Whitepaper
Never pull the leads up or to the side. If bending of the wire leads is required hold the heat shrink area which is close to the ceramic with fine nose plyers while supporting the module and bend at wire insulation only. Avoid excessive lateral shear force when handling thermoelectric coolers this may induce damage to the thermoelectric element. Sharp bend radiuses in the wire should be avoided and wires should be routed to avoid any sharp edges that could penetrate the wire insulation.

Download Whitepaper Now