| Featured Products this Week |
|
|
| 1064 nm Acousto-Optic Frequency Shifter for Doppler Vibration Measurements | |
Acousto-Optic Frequency Shifter
from SIMTRUM
|
| The STFS1007-TS073_15-010-1064 from SIMTRUM is a Tellurium Dioxide (TeO2) Acousto-Optic Frequency Shifter that operates at a wavelength of 1064 nm. It has an active aperture of 1 mm and a center frequency of 73 MHz. This AOFS has a transmission above 95% - 97% and is ideal for laser heterodyne interference, laser doppler velocity measurement & doppler vibration measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310 nm Polarization Maintaining Fiber Optic Circulator | |
Fiber Optic Circulator
from AFW Technologies
|
| The CIR-PM-13-L-5-2 from AFW Technologies is a Fiber Optic Circulator that operates at a wavelength of 1310 nm. It delivers a maximum optical power of 300 mW (continuous wave) and has an isolation of 46 dB. This fiber optic circulator has an insertion loss of up to 0.9 dB and a return loss above 55 dB. It has a minimum cross talk of 50 dB and an extinction ratio of 22 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1550 nm Optical Frequency Comb for Spectroscopy Applications | |
Optical Frequency Comb
from Sevensix
|
| The Frush from Sevensix is an Optical Frequency Comb Generator that operates at a wavelength of 1550 nm. It delivers an output power of over -7 dBm and has a spectral bandwidth above 200 GHz (at -20 dB). This OFC is ideal for terahertz wave generation, next-generation communication research & development, and advanced spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1530 nm - 1565 nm, Optical Frequency Comb for Metrology Applications | |
Optical Frequency Comb
from OptoComb
|
| The WTEC-02-25 from OptoComb is an Optical Frequency Comb Generator that operates at a center wavelength of 1530 nm - 1565 nm. It has a modulation frequency of 25.02 GHz ± 25 MHz, comb span of 10 THz, and pulse width of less than 1 ps. This OFC has a finesse over 40 and is ideal for optical comb/pulse generator, THz synthesis, optical metrology & WDM communications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.02 µm Optical Frequency Comb for Metrology Applications | |
Optical Frequency Comb
from Alpes Lasers
|
| The RT-CW-FC-QCL from Alpes Lasers is an Optical Frequency Comb that operates at a wavelength of 6.02 μm. It delivers an average output power 150 mW and has a sweep rate-current tuning of 250 MHz/mA. This optical frequency comb has a frequency span of 50 cm-1 and FM modulation cut off frequency of 20 kHz. It is ideal for dual comb spectroscopy, metrology, and chemical sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Optical Frequency Converter for OEM Design Applications | |
Optical Frequency Converter
from Covesion
|
| The FIBER-COUPLED BULK MODULE from Covesion is an Optical Frequency Converter that has a second harmonic generation (SHG) wavelength of 1064 nm. It has a continuous wave pump power of 2 W and SHG output power of 125 mW. This optical frequency converter uses MgO:PPLN crystals and has Type-0 (ee-e) nonlinear interaction. It is ideal for OEM design and research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Frequency Converter for Frequency Doubling Applications | |
Optical Frequency Converter
from MOGLABS
|
| The MSL linear cavity SHG system from MOGLABS is an Optical Frequency Converter that converts SHG wavelengths of 740/370 nm, 798/399 nm, 922/461 nm, 960/480 nm and 1020/510 nm. It has a wavelength range of ± 20 nm and coarse tuning range of ± 10 nm. This optical frequency converter has a conversion efficiency of over 90% and is ideal for frequency doubling applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 190 nm - 1200 nm, Monochromator for Fluorescence Excitation Applications | |
Monochromator
from Wavelight Technologies
|
| The WM100 from Wavelight Technologies is a Monochromator that operates at a wavelength of 190 nm - 1200 nm. It is a has a wavelength tuning accuracy of ± 1 nm & ± 1.5 nm and repeatability of ± 0.25 nm & ± 0.5 nm. This monochromator is ideal for applications such as fluorescence excitation, light collection from samples, and integration into UV, visible & NIR analytical instruments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
