| Featured Products this Week |
|
|
| 1550 nm Pulsed Fiber Laser for LiDAR & Range Finding Applications | |
Laser
from Hitronics Technologies Inc.
|
| The AqilaTM1550nm from Hitronics Technologies Inc. is a Pulsed Fiber Laser that operates at a wavelength of 1550 nm. It has a wavelength stability of less than 0.2 nm and delivers an average power of 1 W - 2 W. This mini laser has a pulse width of 1 ns - 10 ns and pulse repetition rate of 0.5 MHz. It is ideal for LiDAR, laser scanning, 3D mapping, depth sensing, and scientific research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 515 nm Femtosecond Laser for Industrial Applications | |
Laser
from Litilit
|
| The Indylit 10 SH from Litilit is a Femtosecond Laser that operates at a central wavelength of 515 nm. It has a wavelength accuracy of ± 1 nm and delivers an average output power of over 5 W (at 200 kHz). This ultrafast laser has a maximum pulse energy above 60 µJ (at 80 kHz) & 3 µJ (at 1 MHz) and internal pulse repetition rate of 80 kHz - 1 MHz. It is ideal for material microprocessing, semiconductor & electronics, and display manufacturing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 975 nm Unmounted Diode Laser Bar for Direct-Diode Applications | |
Laser Diode
from Coherent Corp.
|
| The 150W 30FFx4 mm from Coherent Corp. is a Diode Laser Bar that operates at a central wavelength of 975 nm. It delivers an output power of 150 W and has a wavelength accuracy of ± 10 nm. This TE-polarized diode laser bar has a spectral width below 10 nm (at FWHM) and fill factor of 30 %. It requires a threshold current of 14 A and is ideal for pumping & direct-diode applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 785 nm Single-Mode Fiber Pigtailed SLD Module for Optical Measurements | |
Superluminescent Diode
from Superlum
|
| The SLD-785G15P20 from Superlum is a Single-Mode Fiber Pigtailed Superluminescent Diode (SLD) that has a central wavelength of 785 nm. It delivers an output power of up to 20 mW and has a bell-shaped spectrum of width 15 nm (FWHM). This SLD has a forward voltage of up to 2.5 V and is ideal for fiber-optic sensors, OCT, low-coherence interferometry, and optical measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Erbium-Doped Fiber Amplifier from 1530 to 1565 nm | |
Fiber Optic Amplifier
from Thorlabs Inc
|
| The EDFA300P from Thorlabs Inc is an Erbium-Doped Fiber Amplifier that operates at a wavelength from 1530 to 1565 nm. It provides a saturated output power of over 24.5 dBm with a small signal gain of over 40 dB and output power stability better than ±2%. This linearly polarized amplifier has a polarization extinction ratio of over 25 dB and less than a noise figure of less than 6 dB. It has an input return loss of over 50 dB and I/O isolation above 30 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Acousto-Optic Modulator for Medical & Scientific Applications | |
Acousto-Optic Modulator
from GWU-Lasertechnik Vertriebsges
|
| The CAQS-027-al-FSt-w-c from GWU-Lasertechnik Vertriebsges is a Fused silica Acousto-Optic Modulator (AOM) that operates at a wavelength of 1064 nm. It has an active aperture area that measures 1.6, 2, 3, 4, 5, 6.5 & 8 mm, an operating frequency of 27.12 MHz, and over 99.6% single-pass transmission efficiency. This AOM is ideal for material processing, medical, and scientific applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 950 - 1700 nm, Hyperspectral Camera for Forensic Applications | |
Scientific & Industrial Camera
from ClydeHSI
|
| The NIR-HR from ClydeHSI is a Hyperspectral Camera that has a spectral range of 950 - 1700 nm. This camera has a frame rate of up to 300 lfps with an optical spectral resolution of less than 5 nm. It requires an input voltage of 24 V and supports USB 3.0, Gigabit Ethernet which enhances its data rate to a greater extent. This camera is ideal for art science/conservation and forensic applications. |
| |
Product Details | |
|
|
| Sponsored by Chunghwa Leading Photonics Tech | | |
|
|
| Multi-View Angle Spectrometer from 380 to 780 nm | |
Spectrometer
from Gamma Scientific
|
| The GS-1163 from Gamma Scientific is a Multi-View Angle Spectrometer that operates from 380 to 780 nm. It can simultaneously perform color and luminescence measurements at three different angles (-60, 0 & 60 degrees). This 16-bit spectrometer has a luminescence measurement range from 0.005 to 5000 cd/m2 and is ideal to perform true spectral measurements for high color saturation and wide color gamut OLED, micro-LED & quantum dot displays. |
| |
Download Datasheet
Product Details | |
|
|
|
| NIR Spectrometer for Liquid Analysis | |
Spectrometer
from Viavi Solutions Inc.
|
| The MicroNIR PAT-L from Viavi Solutions Inc. is an NIR Spectrometer that is designed for liquid analysis applications. It has a fully integrated fixed gap immersion probe that operates optical path lengths of 2, 3, 4, 5, and 10 mm. This stainless steel spectrometer probe has a diameter of 26 mm and a sapphire optical window with gold-coated seals. It is ideal for pharmaceutical manufacturing, polymerization process monitoring, oil & gas, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
