| New Photonics Products this Week |
|
|
| 1064 nm DFB Laser Diode for Sensing Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 1064 nm. It delivers an output power of 500 mW and has a linewidth (FWHM) of 2 MHz. This laser diode has a pulse width of 10 ns and repetition rate of 200 kHz. It has a monitor detector responsivity of 1 μA/mW - 30 μA/mW and is ideal for spectroscopy, metrology, sensing & seed laser applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2100 nm Laser Mirror for Ho:YAG Laser Applications | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM247 from OPTOMAN is a Laser Mirror that operates at a wavelength of 2100 nm. It has a diameter of 25.4 mm, thickness of 6.35 mm, and chip size of less than 0.2 mm. This mirror has a clear aperture greater than 90 mm and surface quality of 10-5 S-D (scratch-dig) (S1/S2). It has a maximum surface flatness of 1/10th of wavelength (at 633 nm) and is ideal for efficient beam shaping in ultrafast Ho:YAG laser systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 355 nm Zoom Beam Expander for High-Power Laser Systems | |
Beam Expander
from Sintec Optronics
|
| The STS-EZM5311/075 from Sintec Optronics is a Zoom Beam Expander that operates at a wavelength of 355 nm. It has a magnification of 1x & 3x and pointing stability below 1 mrad. This beam expander has a clear aperture of 10.5 mm and an exit aperture of 20 mm. It features an M30x1 mounting thread and is ideal for collimation of high power laser systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1540 nm - 1560 nm, Optical Pulse Compressor for Dispersion Measurements | |
Optical Pulse Compressor
from PriTel, Inc.
|
| The FP-300 from PriTel, Inc. is an Optical Pulse Compressor with a wavelength of 1540 nm - 1560 nm. It delivers an average output power above 50 mW (at 10 GHz) and has peak power over 10 W. This optical pulse compressor has a minimum spectral width of 6 nm and is ideal for optical switching and measurement of optical fiber dispersion & terahertz fiber-optic applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Pulse Picker for Burst Generation Applications | |
Pulse Picker
from LaCoSys
|
| The X-SERIES from LaCoSys is a Pulse Picker that has a maximum pulse output frequency of up to 100 MHz. It has a pulse input frequency up to 200 MHz and an output rise time/fall time of less than 3 ns. This pulse picker has a pulse width of 3 ns, 8 ns & 14 ns and resolution of 0.01 ns. It has a divider range of up to 16383 and is ideal for pulse selection, pulse generation, phase control, laser power control & laser stabilization applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Electro-Optic Modulator Driver for SONET Applications | |
Electro-Optic Modulator Driver
from Lucent Technology
|
| The OA4SMM5 from Lucent Technology is an Electro-Optic Modulator Driver that has a data rate of 43 Gbps. It has a 3dB bandwidth of 40 GHz and an output of 14.5 dBm (P3dB). This electro-optic modulator driver has an amplitude swing of 3.3 Vpp (output) & 0.1 Vpp - 0.5 Vpp (input) and a variable gain of 17 dB. It has a jitter (RMS) of 0.5 ps and rise/fall time of 6 ps. This electro-optic modulator driver is ideal for driving 40G electro-absorption modulator & SONET applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Polarization Modulator for High-Frequency Switching Applications | |
Polarization Modulator
from LC-Tec
|
| The X-FPM(L) from LC-Tec is a Polarization Modulator that has a transmittance above 43.5%. It has a response time of up to 30 s and relaxation time of less than 1.8 ms. This polarization modulator has reflectance per surface below 2%, and polarizer transmission axis of 45 degrees. It is ideal for high-frequency switching between two linear polarization states. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electro-Optic Polarization Modulator for Multiplexing Applications | |
Polarization Modulator
from Versawave
|
| The PL-40G-3.3-1550 from Versawave is an Electro-Optic Polarization Modulator that operates at a wavelength of 1530 nm - 1610 nm. It has an electro-optic bandwidth of 40 GHz and is ideal for analog & digital, polarization shift keying, polarization multiplexing & de-multiplexing, high-speed polarization sweeping & optical quantum encryption applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1064 nm Polarization Controller for OCT Applications | |
Polarization Controller
from EEOptics
|
| The 1064nm EEO high speed polarization Controller from EEOptics is a Polarization Controller that operates at a wavelength of 1064 nm. It has a response time of less than 10 μs and modulation rate from DC to 130 kHz. This polarization modulator is ideal for polarization scrambler, polarization measurement, quantum computing/ communication, fiber optic sensors, fiber lasers, and optical coherence tomography system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Polarization Modulator for 3D Visualization Applications | |
Polarization Modulator
from DepthQ
|
| The DepthQ 3D Polarization Modulator from DepthQ is a Polarization Modulator that has an efficiency of 15%. It has a switching time of 50 μsec and operating speeds of 120 fps, 144 fps, 192 fps, 240 fps & 400 fps. This polarization modulator has a large aperture size of 17.15 cm x 9.78 cm and small aperture size of 9.84 cm x 6.11 cm. It is ideal for advanced 3D visualization applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Wavelength Meter for Fiber-Optic Sensing Applications | |
Optical Wavelength Meter
from Optoplex Corporation
|
| The OM-OC2GM 100 from Optoplex Corporation is an Optical Wavelength Meter that operates at a wavelength of 1530 nm - 1625 nm. It has an input power range from -40 dBm to -10 dBm and is ideal for optical performance monitoring of DWDM system, multi-wavelength monitoring for wavelength locking, fiber bragg grating sensor analyzer & fiber-optic sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 589 nm Automatic Polarimeter for Quality Inspection Applications | |
Polarimeter
from Infitek
|
| The POL-2B from Infitek is an Automatic Polarimeter that operates at a wavelength of 589 nm. It has a measuring range of ± 45 degrees and repeatability below 0.01 degrees. This polarimeter has a minimum transmission of 10% and is ideal for sugar refining, pharmaceuticals, food, quality inspection, chemical industry, agriculture, light industry, petroleum, universities and research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 340 nm - 432 nm, Ultraviolet Radiometer | |
Radiometer
from Miltec UV
|
| The LEDMAP from Miltec UV is an Ultraviolet Radiometer that has a spectral response range of 340 nm - 432 nm. It has an irradiance of 400 mW/cm²- 40 W/cm² (or up to 250 J/cm²) and a dynamic range of 40W/cm². This radiometer has an accuracy of ± 2% and maximum repeatability of 1%. It has a battery life of 100 minutes and memory capacity of 65 minutes (data collection time). This radiometer has a J-type thermocouple with an effective sample rate of 32 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 nm - 470 nm, Visible Radiometer for Light Curing Applications | |
Radiometer
from Dymax
|
| The ACCU-CAL™ 50V from Dymax is a Visible Radiometer that has a spectral range of 400 nm - 470 nm. It has an intensity range from 1 mW/cm2 to 40 W/cm2 and a resolution of 1 mW/cm2. This radiometer has a photo-sensor diameter of 9 mm and an overall sensor diameter of 37 mm. It has a thickness of 8 mm and is ideal for transmission rate measurement & UV/visible light curing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Design Software for Optimization Applications | |
Optical Design Software
from Optenso
|
| The OpTaliX® from Optenso is an Optical Design Software for the computer-aided design, optimization, analysis, and documentation of optical systems, thin-film multilayer coatings & illumination systems. It supports sequential & non-sequential ray tracing, along with zoom and multi-configuration optical systems. The software also provides geometrical & diffraction analysis, polarization analysis, illumination analysis, environmental analysis, and tolerance analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Design Software for Multiscale Simulation Applications | |
Optical Design Software
from LightTrans International
|
| The VirtualLab Fusion from LightTrans International is an Optical Design Software developed for multiscale optical simulation and design. It uses a unified platform with seamless interoperability between simulation models. This software supports the modeling & analysis of systems involving interferometers, ultrashort pulses, and sources such as lasers, laser diodes, VCSELs, LEDs & x-rays. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Design Software for Laser System Design Applications | |
Optical Design Software
from SCIOPT Enterprises
|
| The Paraxia-Plus-10 from SciOpt Enterprises is an Optical Design Software developed for laser system design on Windows-based computers. It enables the study of laser resonator characteristics, laser beam interactions with components outside the resonator, or both. This software features an easy graphical user interface with a "Digital Laser Workbench" for dynamic system analysis. |
| |
Download Datasheet
Product Details | |
|
