| New Photonics Products this Week |
|
|
| Optical Spectrum Analyzer from 350 - 1200 nm for Light Measurement Applications | |
Optical Spectrum Analyzer
from Yokogawa Test & Measurement Corporation
|
| The AQ6373E from Yokogawa Test & Measurement Corporation is an Optical Spectrum Analyzer that operates at a wavelength of 350 nm - 1200 nm. It has a full span range of 0.5 nm - 850 nm and is ideal for characterization of laser sources, characterization of supercontinuum light sources, visible LED test, pulsed light measurement, gas detection & concentration measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 343 nm UV Grade Fused Silica Optical Mirror | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM267EL from OPTOMAN is an Ultrafast Laser Mirror that operates at a wavelength of 343 nm. It has a diameter of 25.4 mm, thickness of 6.35 mm, and chip size of less than 0.2 mm. This UV-grade fused silica (UVFS) optical mirror has a minimum clear aperture of 90% and surface quality of 10-5 S-D (scratch-dig). It has a maximum surface flatness of 1/10th of wavelength (at 633 nm) and parallelism of 10 arcsec. |
| |
Download Datasheet
Product Details | |
|
|
|
| LiTaO3 Pyroelectric Detector for Temperature Measurement Applications | |
Pyroelectric Detector
from Laser Components
|
| The LD1100X3000|LD11 Series from Laser Components is a Lithium Tantalate (LiTaO3) Pyroelectric Detector that has a responsivity of 57502 V/W. It has a feedback resistance of 100 GOhm and frequency below 1 Hz - 18 Hz (-3 dB). This pyroelectric detector is ideal for non-dispersive infrared gas analysis, non-contact temperature measurement, flame control, and spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 nm - 700 nm, Lateral Displacement Beamsplitter | |
Beam Splitter
from Union Optic Inc.
|
| The LDB0112-4 from Union Optic Inc. is a Lateral Displacement Beamsplitter that operates at a wavelength of 400 nm - 700 nm. It has a dimension, thickness & displacement of 12.7 mm and tolerance of ± 0.2 mm. This BK7 beamsplitter has a surface quality of 60/40 and clear aperture above 90%. It has a surface flatness of less than lambda/4 (at 632.8 nm) and beam deviation below 3 arcmin. This beam splitter has a transmission-to-reflection ratio of 50:50 with tolerance of ± 5%. |
| |
Download Datasheet
Product Details | |
|
|
|
| 525 nm Fixed Focus Collimator | |
Collimator
from MÖLLER-WEDEL OPTICAL GmbH
|
| The 225 004 from MÖLLER-WEDEL OPTICAL GmbH is a Fixed Focus Collimator that operates at a wavelength of 525 nm. It has a focal length of 50 mm and free aperture size of 10 mm. This collimator has a tube diameter of 40 mm and field of view of 10 deg. It includes a collimator reticle and the adjustment is made to infinite distance of the reticle image. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electro-Optic Modulator Driver for Quantum Communication Applications | |
Electro-Optic Modulator Driver
from Beijing Keyang Photonics Technology Co., Ltd.
|
| The KY-MD-20G from Beijing Keyang Photonics Technology Co., Ltd. is an Electro-Optic Modulator Driver that has a data rate of 100 kbps - 25 Gbps. It delivers a saturated output power of 23 dBm and has a bandwidth (-3 dB) above 20 GHz (high) & 30 kHz (low). This electro-optic modulator driver is ideal for high-speed optical fiber communication systems, and quantum communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electro-Optic Modulator Driver for SONET Applications | |
Electro-Optic Modulator Driver
from Lucent Technology
|
| The OA4SMM4 from Lucent Technology is an Electro-Optic Modulator Driver that has a data rate of 43 Gbps. It has a 3dB bandwidth of 40 GHz - 45 GHz and an output of 20 dBm (P3dB). This electro-optic modulator driver has an amplitude swing of 2 Vpp - 4 Vpp (output) & 0.3 Vpp - 0.6 Vpp (input) and a variable gain of 17 dB. It has a jitter (RMS) of 0.5 ps and is ideal for driving 40G electro-absorption modulator & SONET applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1530 nm - 1565 nm, Optical Frequency Comb for Research Applications | |
Optical Frequency Comb
from OptoComb
|
| The OFCG-2.5-25AF from OptoComb is an Optical Frequency Comb Generator that operates at a center wavelength of 1530 nm - 1565 nm. It has a modulation frequency of 25 GHz ± 25 MHz and free spectral range of 2.5 GHz. This OFC has a comb span of 10 THz and pulse width of less than 1 ps. It has a finesse over 40 and comb flatness of -7 dB/THz. This OFC is ideal for research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.02 µm Optical Frequency Comb for Metrology Applications | |
Optical Frequency Comb
from Alpes Lasers
|
| The RT-CW-FC-QCL from Alpes Lasers is an Optical Frequency Comb that operates at a wavelength of 6.02 &mum. It delivers an average output power 150 mW and has a sweep rate-current tuning of 250 MHz/mA. This optical frequency comb has a frequency span of 50 cm-1 and is ideal for dual comb spectroscopy, metrology & chemical sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1550 nm Optical Frequency Comb for Spectroscopy Applications | |
Optical Frequency Comb
from Sevensix
|
| The Frush from Sevensix is an Optical Frequency Comb Generator that operates at a wavelength of 1550 nm. It delivers an output power of over -7 dBm and has a spectral bandwidth above 200 GHz (at -20 dB). This OFC has a free spectral range of 12 GHz - 18 GHz and is ideal for terahertz wave generation, communication research & development, and advanced spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Erbium Fiber Optical Frequency Comb for Dual Comb Applications | |
Optical Frequency Comb
from AOSense
|
| The OFC-160-1550-λ-X from AOSense is an Erbium Fiber Optical Frequency Comb that operates at a wavelength of 1550 nm. It delivers an output power of 20 mW and has a repetition rate tuning of 160 MHz. This OFC has a free-running carrier-envelope offset (CEO) linewidth of less than 200 kHz and signal to noise ratio greater than 45 dB. It is ideal for dual comb applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1560 nm Fully Locked Optical Frequency Comb | |
Optical Frequency Comb
from SIMTRUM
|
| The LL-HM01-OFC-FL-1560-30-200 from SIMTRUM is an Optical Frequency Comb that operates at a wavelength of 1560 nm. It delivers an average output power over 10 mW and has a wavelength accuracy of ± 10 nm. This pulsed OFC has a repetition rate of 200 MHz, 3 dB spectral width above 30 nm, and beam quality factor (M2) of 1.05. It has a carrier envelope offset frequency and narrow optical beat frequency of 40 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Optical Frequency Converter for OEM Design Applications | |
Optical Frequency Converter
from Covesion
|
| The FIBER-COUPLED BULK MODULE from Covesion is an Optical Frequency Converter that has a second harmonic generation (SHG) wavelength of 1064 nm. It has a continuous wave pump power of 2 W and SHG output power of 125 mW. This optical frequency converter uses MgO:PPLN crystals and has Type-0 (ee-e) nonlinear interaction. It is ideal for OEM design and research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Frequency Converter for Frequency Doubling Applications | |
Optical Frequency Converter
from MOGLABS
|
| The MSL linear cavity SHG system from MOGLABS is an Optical Frequency Converter that converts SHG wavelengths of 740/370 nm, 798/399 nm, 922/461 nm, 960/480 nm and 1020/510 nm. It has a wavelength range of ± 20 nm and coarse tuning range of ± 10 nm. This optical frequency converter has a conversion efficiency of over 90% and is ideal for frequency doubling applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flame Photometer for Scientific Research Applications | |
Photometer
from Labzee Scientific
|
| The BZFP-502 from Labzee Scientific is a Flame Photometer that has a linearity of 0.195 ppm (K) and 0.69 ppm (Na). It has a repeatability of 1% (for 20 consecutive samples) and response time below 8 s. This photometer has a sample uptake capacity of less than 6 L/min and is ideal for testing cement, glass, ceramics, fertilizers & soil, mining, chemical products, pharmaceuticals, beverages, MSW testing, health, education & scientific research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital Sucrose Refractometer for Brix Analysis Applications | |
Refractometer
from Hanna Instruments
|
| The HI96801 from Hanna Instruments is a Digital Refractometer that has a Brix range of up to 80%. It has a Brix resolution of 0.1% and Brix accuracy of ±0.2%. This sucrose refractometer has a temperature range from 0 °C to 80 °C and temperature resolution of 0.1°C. It has a temperature accuracy of ± 0.3 °C and an is ideal for Brix analysis in food applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 190 nm - 435 nm, Ultraviolet Spectrometer for OEM Applications | |
Spectrometer
from Ibsen Photonics
|
| The FREEDOM HR/C-UV from Ibsen Photonics is a Ultraviolet Spectrometer that operates at a wavelength of 190 nm - 435 nm. It has a wavelength accuracy below 0.24 nm and resolution of 0.15 nm - 0.9 nm. This spectrometer has a diffraction efficiency of up to 85% and is ideal for compact LIBS instruments, compact & portable instrument integration & OEM applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
