| New Photonics Products this Week |
|
|
| 266 nm DPSS Laser for Lithography & Scatterometry Applications | |
Laser
from CryLaS GmbH
|
| The FQCW 266-25 from CryLaS GmbH is a Diode Pumped Solid State Laser that operates at a wavelength of 266 nm. It has a wavelength stability of ± 1 nm and delivers an output power of 25 mW. This continuous wave laser has a power stability of 2% RMS and linewidth of less than 300 kHz. It is ideal for lithography, interferometry, and scatterometry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| CW Tunable UV-Visible-IR Ti: Sapphire Laser Mixing Modules | |
Laser
from M Squared
|
| The SOLSTIS EMM from M Squared are CW Tunable UV-Visible-IR Ti: Sapphire Laser Mixing Modules that operate at wavelength ranges of 500 nm - 540 nm, 540 nm - 580 nm & 580 nm - 600 nm (EMM-1550), 515 nm - 670 nm (EMM-1950) and 1100 nm - 2200 nm (DFG-532). They deliver an output power of above 0.5 W, 0.4 W & 0.2 W (EMM-1550) and has an intensity noise of up to 0.25% RMS. |
| |
Download Datasheet
Product Details | |
|
|
|
| 915 nm CW Multimode Laser Diode for Defense & Medical Applications | |
Laser Diode
from Sheaumann Laser
|
| The CMC-915-2000-1 from Sheaumann Laser is a CW Laser Diode that operates at a wavelength of 915 nm. It delivers an output power of 2 W and has a slope efficiency of 1 W/A. This multimode laser diode has a beam divergence of 30 degrees (vertical far-field) & 8 degrees (horizontal far-field) at FWHM. It is ideal for laser pumping, laser therapy, defense, and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 760 nm Fabry-Perot Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA eagleyard
|
| The EYP-RWE-0760-02010-1500-SOT12-0000 from TOPTICA eagleyard is a Fabry-Perot Laser Diode that operates at a wavelength of 760 nm. It delivers an output power of 80 mW and has a tuning range of 752 nm - 772 nm. This TM polarized laser diode has TEM00 mode with a beam divergence of 10 deg (parallel) and 28 deg (perpendicular) at FWHM. It is ideal for spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 Megapixel CCD Image Sensor for Security Applications | |
CCD Image Sensor
from Sharp Devices Europe
|
| The RJ33P4AA0LT from Sharp Devices Europe is a 3 Megapixel CCD Image Sensor that has a resolution of 1984 (H) x 1504 (V) pixels. It has a 1/2.5" optical format that delivers a frame rate of 17 fps. This iSHCCD II CCD image sensor has a total pixel of 2980k and pixel size of 2.9 µm x 2.9 µm. It has a sensitivity of 650 mV and smear ratio of -110 dB. This CCD image sensor is ideal for security applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12.7 mm Potassium Dihydrogen Phosphate Pockels Cell | |
Pockels Cell
from Qioptiq Photonics
|
| The 84503021127 | Positioner 25 from Qioptiq Photonics is a Potassium Dihydrogen Phosphate (KD*P) Pockels Cell that has a diameter of 12.7 mm. It has a beam height of 24 mm and tilt range of ± 4 nm. This pockels cell can be adjusted via fine-threaded screws and has optional special OEM modifications. It is available in a compact and stable design that measures 46 mm x 46 mm x 40 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1525 nm - 1605 nm, Broadband LiNbO3 Electro-Optic Intensity Modulator | |
Electro-Optic Intensity Modulator
from Thorlabs Inc
|
| The LNA2124 from Thorlabs Inc. is a Broadband LiNbO3 Electro-Optic Intensity Modulator that operates at a wavelength of 1525 nm - 1605 nm. It has an electro-optic bandwidth of 15 GHz and a minimum operating frequency from DC to 15 GHz. This z-cut electro-optic intensity modulator has an RF half-wave voltage (at 1 GHz) of 4.3 V and a DC bias half-wave voltage (at 1 kHz). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by everything PE | | |
|
|
| 1560 nm Optical Frequency Comb for Laser Reference Applications | |
Optical Frequency Comb
from TOPTICA Photonics
|
| The DFC CORE + from TOPTICA Photonics is an Optical Frequency Comb that operates at a center wavelength of 1560 nm and can be extended to any desired wavelength between 420 nm and 2000 nm. This OFC delivers an output power above 10 mW and is ideal for laser reference, high-resolution & dual-comb spectroscopy, interferometry, and microwave generation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| CMOS 2.86 MP GigE Vision Camera with Power over Ethernet (PoE) | |
Scientific & Industrial Camera
from IMPERX
|
| The P67-C1911 from IMPERX is a 2.86 Megapixel CMOS Camera that has a resolution of 1944 (H) x 1472 (V) pixels. It has a global shutter in a 2/3” optical format that delivers a frame rate of 40 fps (8-bit), 20 fps (10-bit/12-bit unpacked), and 26 fps (10-bit/12-bit packed). This camera and is ideal for aerospace, satellites, surveillance, ball grid array, and PCB inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| EO-3AN 1/3" CCD Color Analog Camera, NTSC | |
Scientific & Industrial Camera
from Edmund Optics
|
| The 88-408 from Edmund Optics is a 0.4 Megapixel CCD Color Analog Camera that has a resolution of 976 (H) x 494 (V) pixels. It has a 1/3" optical format and pixel size of 4.9 µm x 6.9 µm. This interlaced CCD camera has a sensing area of 4.8 mm x 3.4 mm and exposure time of 1/60 s - 1/100000 s (auto/manual). It features internal synchronization, back panel interface port orientation, & NTSC signal format and is RoHS compliant. |
| |
Product Details | |
|
|
|
| 850 nm - 2300 nm, Free Space AOTF-NIR Spectrometer | |
Spectrometer
from Brimrose Corporation
|
| The Luminar 4030 from Brimrose Corporation is a Free Space NIR spectrometer that operates at spectral ranges of 850 nm - 1700 nm, 900 nm - 1800 nm and 1100 nm - 2300 nm (standard). It has a spectral resolution of 2 nm - 10 nm, wavelength accuracy of ± 0.5 nm, and is ideal for food & agricultural - analyzes from field to factory, fluidized bed drying, and tablet coating inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 350 cm-1 - 7000 cm-1, FTIR Spectrometer for Scientific Research Applications | |
Spectrometer
from Agilent Technologies
|
| The Cary 630 FTIR from Agilent Technologies is an FTIR (Fourier Transform Infrared) Spectrometer that has a spectral range of 350 cm-1 - 7000 cm-1 (KBr) and 600 cm-1 - 5100 cm-1 (ZnSe). It has a spectral resolution of up to 2 cm-1 and is ideal for the pharmaceutical industry, polymer industry, cannabis testing, academic research, petrochemical analysis, and life science research applications. |
| |
Download Datasheet
Product Details | |
|
