| New Photonics Products this Week |
|
|
|
|
|
|
|
|
|
|
|
|
| 525 nm Fiber-Coupled Green Laser Diode | |
Laser Diode
from Frankfurt Laser Company
|
| The FERT-525-2W-FC105 from FrankFurt Laser Company is a Fiber-Coupled Green Laser Diode that operates at a wavelength of 525 nm. It has a wavelength tolerance of ± 5 nm, spectral width of 2 nm, and delivers an output power of 2 W. This fiber-coupled laser diode has a core diameter of 105 µm and numerical aperture of 0.22. It requires a DC supply voltage of 12 V, threshold current of 0.3 A, and consumes a current of less than 2 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.09 Megapixel CCD Image Sensor for Security Applications | |
CCD Image Sensor
from Sharp Devices Europe
|
| The RJ33N3AA0LT from Sharp Devices Europe is a 2.09 Megapixel CCD Image Sensor that has a resolution of 1928 (H) x 1088 (V) pixels. It has a 1/3" optical format that delivers a frame rate of 25 fps. This CCD image sensor has a total pixel of 2170k and pixel size of 2.8 µm x 2.8 µm. It has a sensitivity of 470 mV and smear ratio of -110 dB. This CCD image sensor is ideal for security applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.23 Megapixel CMOS-based SWIR Sensor for Industrial Applications | |
SWIR Sensor
from TriEye
|
| The Raven from TriEye is a 1.23 Megapixel CMOS-based SWIR Sensor that has a resolution of 1284 (H) x 960 (V) pixels. It has a global/rolling shutter in a 2/3" optical format that delivers a frame rate of up to 120 fps. This SWIR sensor has a pixel size of 7 µm x 7 µm and is ideal for advanced driver assistance systems (ADAS) & autonomous vehicles (AV), biometrics, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1260 nm - 1380 nm, PIN Photodiode for Scientific Applications | |
Photodetector
from LD4B
|
| The PINTIA4B-25G-L from LD4B is a PIN Photodiode that operates at a wavelength of 1260 nm - 1380 nm. It has a bandwidth of 17 GHz, differential responsivity of 0.9 mV/µW, and maximum optical sensitivity of -14 dBm. This photodiode has a rise/fall time of 21 ps and low-frequency cut-off of 100 kHz. It has a return loss of 50 dB, data rate of 25 Gbps, and is ideal for scientific and industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 630 nm - 1200 nm, Electro-Optic Phase Modulator for Spectroscopy Applications | |
Electro-Optic Phase Modulator
from QUBIG
|
| The PM8-NIR from QUBIG is a Lithium Niobate (LiNbO3) Electro-Optic Phase Modulator that operates at a wavelength of 630 nm - 1200 nm. It has a resonance frequency of 42.1 MHz - 57.6 MHz and an operating bandwidth of 361 kHz. This electro-optic phase modulator has a quality factor of 139 and is ideal for laser frequency stabilization, laser cooling, spectroscopy, and spectral broadening applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 900 nm Electro-Optic Phase Modulator for Spectrum Broadening Applications | |
Electro-Optic Phase Modulator
from iXblue Photonics
|
| The NIR-MPX950-LN-05-00-P-P-FA-FA from iXblue Photonics is an Electro-Optic Phase Modulator that operates at a wavelength of 900 nm. It has an electro-optic bandwidth of 5 GHz and a usable bandwidth of 10 GHz. This electro-optic phase modulator has an RF half-wave voltage of 3.5 V and is ideal for beam combining, interferometric based sensors, quantum optics, and spectrum broadening applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 nm - 1300 nm, KD*P Pockels Cell for Optical Isolation Applications | |
Pockels Cell
from G&H
|
| The TX 7595 from G&H is a Deuterated Potassium Dihydrogen Phosphate (KD*P) Pockels Cell that operates at a wavelength of 300 nm - 1300 nm. It has an active aperture of diameter 73.5 mm and a modulation frequency of up to 1 kHz. This pockels cell is ideal for q-switching, optical isolators in petawatt/terawatt lasers, and low-frequency modulation of high-power visible to NIR laser beams. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCB Directory | | |
|
|
| 1342 nm EO Q-switch BBO Pockels Cell for Cavity Dumping Applications | |
Pockels Cell
from Sintec Optronics
|
| The STEK-PCB3S-1342 from Sintec Optronics is a Electro-Optic (EO) Q-switch Beta Barium Borate (BBO) Pockels Cell that operates at a wavelength of 1342 nm. It has a single pass optical transmission of greater than 98% and a clear aperture diameter of 2.5 mm. This pockels cell is ideal for DPSS Q-switch, regenerative amplifier control, cavity dumping, and beam chopper applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.3 Megapixel SWIR InGaAs Camera for Bright-Field Microscopy Applications | |
Scientific & Industrial Camera
from PCO AG
|
| The pco.pixelflyTM 1.3 SWIR from PCO AG is a 1.3 Megapixel SWIR InGaAs Camera that has a spectral range of 350 nm - 1700 nm. It has a global shutter that delivers a maximum frame rate of 72 fps and has a resolution of 1280 (H) x 1024 (V) pixels. This SWIR camera is ideal for fluorescence & bright-field microscopy, intravital microscopy, in-vivo microscopy, and semiconductor inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1225 nm - 1375 nm, Mach-Zehnder Interferometer for OCT Applications | |
Interferometer
from LD-PD Inc
|
| The OL-MZI-1300 from LD-PD Inc is a Mach-Zehnder Interferometer that operates at a wavelength of 1225 nm - 1375 nm. It has a free spectrum range of 103.3 GHZ and saturated optical power of 50 mW (at 1300 nm). This interferometer has a balance detector bandwidth of 200 MHz and an arm difference of 2 mm. It is ideal for optical coherence tomography (OCT) & other coherent field applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.44 Megapixel Fizeau Interferometer for Imaging System Applications | |
Interferometer
from Zygo Corporation
|
| The Verifire from Zygo Corporation is a 1.44 Megapixel Fizeau Interferometer that has a camera resolution of 1200 x 1200 pixels. It operates at a wavelength of 633 nm and delivers an output power above 3 mW. This interferometer produces a test beam of diameter 4" or 6" and has an optical center line of 4.25". It is ideal for reflective & transparent optics, and imaging system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1500 nm IR Spectrometer for LIF & Plasma Emission Applications | |
Spectrometer
from HORIBA
|
| The 1250M from HORIBA is an Infrared Spectrometer that has a spectral range of up to 1500 nm. It has a wavelength accuracy of ± 0.15 nm and repeatability of ± 0.005 nm. This spectrometer has a resolution of 0.006 nm at the exit slit with PMT and is ideal for Raman spectroscopy, Plasma Emission, LIPS, LIF spectroscopy & LIBS (Laser-induced breakdown spectroscopy) applications. |
| |
Download Datasheet
Product Details | |
|
