| New Photonics Products this Week |
|
|
| 355 nm UV Picosecond Pulsed Laser for Cutting & Drilling Applications | |
Laser
from MKS | Spectra-Physics
|
| The IceFyre UV50 from MKS | Spectra-Physics is a UV Picosecond Laser that operates at a wavelength of 355 nm. It delivers an output power of greater than 50 W and has a maximum pulse energy above 40 µJ (at 1250 kHz). This laser has a beam-pointing stability of up to ± 25 µrad/°C and is ideal for OLED processing, PCB processing, LED scribing, metal cutting, drilling and marking applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 532 nm CW Multimode Laser for High-Speed Imaging Applications | |
Laser
from OXIDE Corporation
|
| The Fiber Out CW 532nm Laser from OXIDE Corporation is a Continuous Wave Laser that operates at a wavelength of 532 nm. It delivers an output power of up to 3 W and has a multimode output fiber with a diameter of 100 µm & fiber length of 5 ± 0.3 m. This laser is ideal for particle image velocimetry, particle size measurement, and high-speed imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm - 2400 nm, Supercontinuum Source for Metrology Applications | |
Supercontinuum Source
from FORC-Photonics
|
| The SC450-2-PP from FORC-Photonics is a Supercontinuum Source that has a spectral bandwidth of 450 nm - 2400 nm. It delivers an average power of 0.1 W (at 1 MHz), 0.2 W (at 2 MHz), 0.5 W (at 5 MHz), 1 W (at 10 MHz) and 2 W (at 20 MHz). This supercontinuum source is ideal for TCSPC, Fluorescence Lifetime Imaging (FLIM), OCT, bio-medical, and metrology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1690 nm DFB Laser Diode for Water Vapor Spectroscopy Applications | |
Laser Diode
from Sacher Lasertechnik
|
| The DFB-1690-005 from Sacher Lasertechnik is a Distributed Feedback (DFB) Laser Diode that operates at a wavelength of 1690 nm. It delivers an output power of 5 mW and has a spectral width of 1.5 MHz. This laser diode has a wavelength tuning of 2 nm and slope efficiency of 0.15 mW/mA. It has TE00 mode and is ideal for water vapor spectroscopy, scientific & industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 940 nm CW Laser Diode for LiDAR & Time of Flight Applications | |
Laser Diode
from Sheaumann Laser
|
| The BF-940-0200 from Sheaumann Laser is a Continuous Wave Laser Diode that operates at a wavelength of 940 nm. It delivers an output power of 200 mW and has a slope efficiency of 0.7 W/A. This single-mode laser diode requires a threshold current of 35 mA, DC voltage of 2.1 V, and consumes 300 mA of current. It is ideal for optical data storage, LiDAR, and Time of Flight (ToF) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9.325 µm x 9.325 µm, CCD Linear Image Sensor for Photocopier Applications | |
CCD Image Sensor
from Toshiba Corporation
|
| The TCD2711DG from Toshiba Corporation is a CCD Linear Image Sensor that has a pixel size of 9.325 (H) µm x 9.325 (V) µm. It has 7500 image-sensing elements with a spectral resolution of 24 lines/mm and data rate of 70 MHz (color). This CCD image sensor has a sensitivity of 18.9 V/lx.s (Red), 20.4 V/lx.s (Green) and 13.4 V/lx.s (Blue). It is ideal for color scanners & photocopier applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850 nm Silicon Photodiode for Pulse Detector Applications | |
Photodiode
from Dexerials Corporation
|
| The KPD101M32 from Dexerials Corporation is a Silicon (Si) Photodiode that operates at a wavelength of 850 nm. It has an active area of 0.81 mm x 0.81 mm and a half angle of 90 degrees. This photodiode has an open circuit voltage of 400 mV and a short circuit current of 16 µA. It is ideal for optical switches, optical encoders, pulse detectors, sensors, and industrial control applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Channel Pyroelectric Detector for Gas Analysis Applications | |
Pyroelectric Detector
from InfraTec
|
| The LRM-284 from InfraTec GmbH Infrarotsensorik und Messtechnik is a Multi-Channel Pyroelectric Detector that has a minimum field of view of 70o. It has a detectivity of 4.5 x 108 cm·sqrt(Hz)/W and rms noise density of up to 45 µV/sqrt(Hz). This pyroelectric detector operates in current mode and has a thermal time constant of 100 ms. It is ideal for gas analysis & flame detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2600 V - 3800 V, Pockels Cell Driver for Pulse Picker Control Applications | |
Pockels Cell Driver
from TEO Technology
|
| The PCD-41-3800 from TEO Technology is a Pockels Cell Driver that has an output voltage amplitude of 2600 V - 3800 V. It has a high-voltage pulse duration of 2 ns - 600 ns and high-voltage pulse repetition rate of 1000 Hz. This pockels cell driver has a rise & fall time of 2 ± 1 ns and is ideal for ultrafast optical beam modulation & deflection, control of laser regenerative amplifiers & pulse pickers. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by everything PE | | |
|
|
| 2800 V - 3800 V, EO Pockels Cell Driver for Q-Switched Laser Heads | |
Pockels Cell Driver
from Vigitek
|
| The PCDA4-01 from Vigitek is an Electro-Optical (EO) Pockels Cell Driver that has a maximum repetition rate of 2 kHz (with 4.6 mm transformer) and 5 kHz (with 9.2 mm transformer). It has a high voltage pulse width of 0.5 µs - 2 µs and amplitude of 2800 V - 3800 V. This pockels cell driver has a pulse-to-pulse instability of 5% and is ideal for actively Q-switched & hand-held Q-switched laser heads. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310/1550 nm Fixed Fiber Optic Attenuator for Telecommunication Applications | |
Fiber Optic Attenuator
from O/E LAND INC.
|
| The OAT-HF from O/E LAND INC. is a Fixed Fiber Optic Attenuator that operates at wavelengths of 1310 nm or 1550 nm. It has an attenuation of 1dB, 2dB, 3dB, 5dB, 10dB, 15dB, and 20dB. This in-line fiber optic attenuator has an accuracy of ±0.5, ±0.75, ±0.8, ±1, ±1.5 & ±2 and a return loss above 45. It is ideal for telecommunication, local area network, and other optical testing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Electro-Optic Laser Frequency Comb for Spectrograph Calibration | |
Optical Frequency Comb
from Octave Photonics
|
| The Broadened EO comb from Octave Photonics is an Electro-Optic (EO) Laser Frequency Comb that operates at a center wavelength of 1550 nm. It delivers an output power of up to 5 W and has a repetition rate tuning range of 5 MHz. This frequency comb has a repetition rate of 5 GHz - 30 GHz and is ideal for spectrograph calibration and dual-comb spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1225 nm - 1375 nm, Mach-Zehnder Interferometer for OCT Applications | |
Interferometer
from LD-PD Inc
|
| The OL-MZI-1300 from LD-PD Inc is a Mach-Zehnder Interferometer that operates at a wavelength of 1225 nm - 1375 nm. It has a free spectrum range of 103.3 GHZ and saturated optical power of 50 mW (at 1300 nm). This interferometer has a balance detector bandwidth of 200 MHz and an arm difference of 2 mm. It is ideal for optical coherence tomography (OCT) & coherent field applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
