| New Photonics Products this Week |
|
|
| 915 nm Direct Diode Laser for Cutting & Welding Applications | |
Laser
from Gap Laser Systems
|
| The GDL400 from Gap Laser Systems is a Direct Diode Laser that operate at wavelengths of 915 nm and 976 nm (optional). It delivers an average output power of 400 mW and has 2 diode modules. This continuous wave or quasi-continuous wave laser has an optical fiber with a diameter of 200 µm and is ideal for welding, soldering, thermal material activation & cutting applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Pulsed Solid-State Laser for Sensor Module Applications | |
Laser
from TRUMPF
|
| The TRUPULSE 556 from TRUMPF is a Pulsed Solid-State Laser that operates at a wavelength of 1064 nm. It delivers an output power of 530 W and has a pulse duration of 0.3 ms - 50 ms. This laser has a pulse repetition rate of 833 Hz and pulse energy of 60 J & 100 J. It is ideal for endoscopic instruments, sensor modules, and optoelectronic component applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1530 nm - 1565 nm, Microprocessor Controlled Supercontinuum Source | |
Supercontinuum Source
from Nuphoton Technologies, Inc.
|
| The ASE-C0-MR-17-FCA from Nuphoton Technologies, Inc. is a Supercontinuum Source that operates at a wavelength of 1530 nm - 1565 nm. It delivers an output power of +17 dBm with a measurement accuracy of up to +/- 0.5 dB (at 1550 nm) and polarization dependence of less than 0.3 dB. This microprocessor-controlled supercontinuum source supports FC/APC connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 808 nm CW Single Mode Laser Diode for 3D Imaging Applications | |
Laser Diode
from Sheaumann Laser
|
| The M9-808-0100 from Sheaumann Laser is a Laser Diode that operates at a wavelength of 808 nm. It delivers a continuous-wave output power of 100 mW and has a slope efficiency of 1 W/A. This single-mode laser diode has a beam divergence of 18 degrees (vertical far-field) & 8 degrees (horizontal far-field) at FWHM. It is ideal for particle counting, sizing, inspection & 3D imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| CMOS Image Sensor for Smart Toys & IoT Applications | |
CMOS Image Sensor
from Pixart
|
| The PAJ6100U6 from Pixart is a Quarter VGA CMOS Image Sensor that has a resolution of 320 (H) x 240 (V) pixels. It has a global shutter that delivers a maximum frame rate of up to 30 fps. This image sensor has a pixel size of 3 µm x 3 µm, dynamic range of 54 dB, and signal-to-noise ratio of 40 dB. It requires a DC supply voltage of 3.3 V and is ideal for smart toys and IoT applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 570/632 nm Bicolor ChipLED for Industrial Equipment Applications | |
LED
from Broadcom
|
| The HSMF-C144 from Broadcom is a Right Angle Bicolor ChipLED that operates at wavelengths of 570 nm (yellow-green) and 632 nm (red). It has a luminous intensity of 18 mcd - 79 mcd and viewing angle of 120°. This LED has a forward voltage of 1.6 V - 2.4 V and forward current of up to 30 mA. It is ideal for status & front panel indicators, office automation, and industrial equipment applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Channel Pyroelectric Detector for Radiometry Applications | |
Pyroelectric Detector
from InfraTec
|
| The LME-302 from InfraTec is a Single Channel Pyroelectric Detector that has a minimum field of view of 80o (CaF2 or BaF2 0.4 mm thick) or 90o (silicon substrate 0.5 mm thick). It has a detectivity of 6 x 108 cm·sqrt(Hz)/W and an rms noise density of 150 nV/sqrt(Hz). This pyroelectric detector is ideal for gas analysis, flame detection, and radiometry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Electro-Optic Intensity Modulator for Communication Applications | |
Electro-Optic Intensity Modulator
from iXblue Photonics
|
| The MX-LN-10-PD-P-P-FA-FA from iXblue Photonics is an Electro-Optic Intensity Modulator that operates at a wavelength of 1550 nm. It has an electro-optical bandwidth of 10 GHz and a data rate of up to 56 Gb/s. This electro-optic intensity modulator has an RF half-wave voltage of 5.5 V (at 50 kHz) and is ideal for general-purpose intensity modulation, and test & measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 705 nm Fiber-Coupled Electro-Optic Phase Modulator for OCT Applications | |
Electro-Optic Phase Modulator
from Jenoptik
|
| The PM705 from Jenoptik is a Waveguide-Based Fiber-Coupled Electro-Optic Phase Modulator that operates at a wavelength of 705 nm. It has a spectral bandwidth of ± 20 nm and half-wave voltage of 5 V. This electro-optic phase modulator has an insertion loss of 5 dB and optical rise time above 200 ps. It is ideal for analog & digital modulation, sideband generation, and OCT applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by EMC Directory | | |
|
|
| 15/50/150 ps, Precision Optical Delay Lines | |
Optical Delay Line
from APE Angewandte Physik & Elektronik GmbH
|
| The ScanDelay USB from APE Angewandte Physik & Elektronik are Precision Optical Delay Lines that has maximum scan ranges of 15 ps, 50 ps, or 150 ps. They have a linearity of 0.5% and clear aperture of 1" or 1/2". These optical delay lines have an internal generator with a frequency of 0.1 Hz - 20 Hz and external trigger input of 20 Hz - 50 kHz. They have control electronics that contain a motor driver and quartz-stabilized signal synthesizer. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fiberoptic Micro-Borescopes for Optical Instrumentation Applications | |
Borescope
from Titan Tool Supply
|
| The L-1-12-90 from Titan Tool Supply is a Fiberoptic Micro-Borescope that has a field of view of 42 deg. It has a diameter of 1.1 mm and length of 152 mm or 305 mm. This borescope has a viewing angle of 90 deg, focal length of 3 mm - 6 mm, and magnification of 30x. It has a 6K element imaging bundle and is ideal for industrial-grade optical instrumentation & precision micro-finishing tool applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Resolution Remote Imaging System for Inspection Applications | |
Borescope
from Lenox Instrument
|
| The 7E084VL-100080 from Lenox Instrument is a Borescope that has a direct field of view of 80 deg. It has a diameter of 8.4 mm and length of 10 m. This long-range videoscope borescope is ideal for remote visual inspection (RVT), tubing & pipe inspection, heat exchangers & process lines, hydraulic cylinders, covert inspection, borescope inspection, drill pipe inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.31 Megapixel CMOS Camera for Robotics Applications | |
Scientific & Industrial Camera
from New Imaging Technologies
|
| The MN1003 from New Imaging Technologies is a 1.31 Megapixel CMOS Camera that has a resolution of 1280 (H) x 1024 (V) pixels. It has a rolling/global shutter in a 2/3" optical format that delivers a frame rate of up to 50 fps. This monoboard camera has a pixel pitch of 6.8 µm and dynamic range above 140 dB. It is ideal for welding imaging, outdoor & robotics applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15.82 Megapixel CCD Camera for Imaging Applications | |
Scientific & Industrial Camera
from IMPERX
|
| The B4820 from IMPERX is a 15.82 Megapixel CCD Camera that has a resolution of 4872 (H) x 3248 (V) pixels. It has a 43.3 mm optical format that delivers an overlocked frame rate of 4.2 fps and a standard clock frame rate of 3.2 fps. This camera has a pixel size of 7.4 µm x 7.4 µm and sensor area of 36.29 mm (H) x 24.27 mm (V). It is ideal for imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
