| Featured Products this Week |
|
|
| 639 nm Diode Laser for Inspection & Laser Therapy Applications | |
Laser
from The Optoelectronics Company Ltd
|
| The 500-010001 from The Optoelectronics Company Ltd is a Diode Laser that operates at a wavelength of 639 nm. It delivers an output power of 5 mW and has a power stability of 5%. This laser produces a beam of diameter 4 mm x 2 mm and has a beam divergence of 0.6 mrad x 0.3 mrad. It is ideal for industrial alignment & inspection, sensing, positioning, and low-level laser therapy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 266/355/532/1064 nm Picosecond DPSS laser for Sensing Applications | |
Laser
from Passat Ltd.
|
| The Compiler HPRR from Passat is a Picosecond DPSS laser that operate at wavelengths of 1064 nm, 532 nm, 355 nm (optional), and 266 nm (optional). It has an output energy of 10 µJ (at 266 nm), 15 µJ (at 355 nm), 35 µJ (at 532 nm) and over 65 µJ (at 1064 nm). This laser is ideal for UV & time-resolved spectrometry, single & double-photon LIF, remote sensing, laser ablation, and research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 808 nm Quasi Continuous Wave Laser Diode for Research Applications | |
Laser Diode
from Lumispot Tech
|
| The LM-8XX-Q3600-BG06H3-1 from Lumispot Tech is a Quasi Continuous Wave Laser Diode that operates at a center wavelength of 808 nm. It delivers an output power of 3600 W and has a wavelength tolerance of ±2 nm. This horizontally stacked laser diode has a beam divergence of 36 degrees (fast axis) and 8 degrees (slow axis) at FWHM. It is ideal for illumination, detection, and research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 355 nm UV Deflector Acousto-Optic Modulator for Micromachining Applications | |
Acousto-Optic Modulator
from L3Harris Technologies
|
| The H-903 from L3Harris Technologies is an Ultraviolet Deflector Acousto-Optic Modulator that operates at a wavelength of 355 nm. It has a center frequency of 200 MHz and minimum diffraction efficiency of over 80%. This vertically polarised AOM has a deflection bandwidth of 100 MHz and is ideal for beam intensity control, micromachining in UV laser systems, and ion-trap illumination applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1460 nm - 1500 nm, S-Band TDFA for Telecom Network Applications | |
Optical Amplifier
from Fiberlabs Inc
|
| The AMP-FL5201-SB-19 from Fiberlabs Inc is an S-Band Thulium Doped Fiber Amplifier (TDFA) that operates at a wavelength of 1460 nm - 1500 nm. It delivers a maximum output power of over 19 dBm and has a gain of 19 dB. This optical amplifier has an input or output isolation of greater than 40 dB and is ideal for booster, in-line, pre-amplifier, telecom/datacom network & loss compensation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Optical Frequency Comb Module for Sensor Interrogation Applications | |
Optical Frequency Comb
from Pilot Photonics
|
| The Lyra-OCS-1000 from Pilot Photonics is an Optical Frequency Comb Module that operates at a center wavelength of 1550 nm. It has 4 - 15 comb lines with a comb bandwidth of 200 GHz (at -40 dB) and spectral flatness of 3 dB. This OFC has a free spectral range of 10 GHz and is ideal for optical signal processing, precision optical measurements, spectroscopy, and sensor interrogation applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by EMC Directory | | |
|
|
| 2 Megapixel CMOS Camera Module | |
Scientific & Industrial Camera
from Vision Components
|
| The VC MIPI IMX462 C from Vision Components is a 2 Megapixel CMOS Camera Module that has a resolution of 1920 (H) x 1080 (V) pixels. It has a rolling shutter in a 1/2.8" optical format that delivers a maximum frame rate of 120 fps (at 10-bit ADC). This camera has a pixel size of 2.9 (H) µm x 2.9 (V) µm and sensor size of 5.617 (H) mm x 3.181 (V) mm. It has a gain of up to 30 dB (analog) & 42 dB (digital), and CRA of 6.14 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
| 900 nm - 1075 nm, Fiber Optic Spectrometer for LIBS Applications | |
Spectrometer
from Edinburgh Instruments
|
| The EPP2000HR NIR2 from Edinburgh Instruments is a fiber-optic spectrometer that operates at a wavelength of 900 nm - 1075 nm. It has 2048 pixel CCD detector that provides a detector range of 200 nm - 1200 nm. This spectrometer has a pixel size of 14 µm x 200 µm and is ideal for wavelength monitoring & characterization for tunable lasers/LEDs and laser-induced breakdown spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
