| Featured Products this Week |
|
|
| 343 nm Pulsed Nanosecond Laser for Cutting & Drilling Applications | |
Laser
from MKS | Spectra-Physics
|
| The Talon Ace UV100 from MKS | Spectra-Physics is a Pulsed Nanosecond Laser that operate at wavelengths of 343 nm. It delivers an average output power of greater than 100 W and has a pulse energy above 500 µJ. This laser is ideal for cutting & drilling, photovoltaics processing, LED processing, high-speed marking, CFRP cutting, drilling and surface texturing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Pulsed Nd:YAG Q-switched Laser for Scientific & Medical Applications | |
Laser
from Amplitude Laser
|
| The Inlite III - 10 from Amplitude Laser is a Pulsed Nd:YAG Q-switched Laser that operate at wavelengths of 266 nm, 355 nm, 532 nm, and 1064 nm. It has a pulse width of 5 ns - 7 ns (266 nm & 355 nm), 6 ns - 8 ns (532 nm & 1064 nm) and linewidth of 1 cm-1. This laser is ideal for scientific applications such as LiDAR & Thomson scattering, industry and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 480 nm - 2200 nm, Supercontinuum Source for Fiber Sensing Applications | |
Supercontinuum Source
from Sintec Optronics
|
| The STYS-SC-5-FC from Sintec Optronics is a Supercontinuum Source that operates at a wavelength of 480 nm - 2200 nm. It delivers an output power of 800 mW with a power stability of less than 1% and has a spectrum stability below 0.1 dB. This unpolarised supercontinuum source is ideal for fluorescence spectroscopy, fiber sensing, and fiber component characterization applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 638 nm Continuous Wave Laser Diode | |
Laser Diode
from LD4B
|
| The LD4B-638-FP-10 from LD4B is a Continuous Wave Laser Diode that operates at a wavelength of 638 nm. It delivers an output power of 13 mW and has a spectral width of 1 nm. This laser diode has a slope efficiency of 0.55 mW/mA and polarization extinction ratio above 17. It requires a threshold current of 35 mA and DC supply voltage of 2.3 V. This laser diode has a built-in monitor photodiode with a monitor current of 0.06 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0.5 Megapixel CMOS Image Sensor for Scientific Imaging Applications | |
CMOS Image Sensor
from Gpixel Microelectronics Inc.
|
| The GLUX1605BSI from Gpixel Inc. is a 0.5 Megapixel CMOS Image Sensor that has a resolution of 800 (H) × 600 (V) pixels. It has a rolling shutter in a 1" optical format that delivers a frame rate of 60 fps (HDR) and 25 fps (low noise). This backside illuminated (BSI) CMOS image sensor has a pixel size of 16 µm x 16 µm and is ideal for scientific imaging & UV industrial inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1060 nm LiNbO3 Electro-Optic Intensity Modulator for Sensing Applications | |
Electro-Optic Intensity Modulator
from Beijing Rofea Optoelectronics
|
| The Rof-AM from Beijing Rofea Optoelectronics is a Lithium Niobate (LiNbO3) Electro-Optic Intensity Modulator that operates at a wavelength of 1060 nm. It has a bandwidth of 300 MHz and an RF half-wave voltage of 3 V. This electro-optic intensity modulator has a switch extinction ratio of 23 dB and is ideal for fiber optic sensing system and pulsed light modulation system applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by everything PE | | |
|
|
| 12.7 mm Potassium Dihydrogen Phosphate Pockels Cell | |
Pockels Cell
from Qioptiq Photonics
|
| The 84503021127 | Positioner 25 from Qioptiq Photonics is a Potassium Dihydrogen Phosphate (KD*P) Pockels Cell that has a diameter of 12.7 mm. It has a beam height of 24 mm and tilt range of ± 4 nm. This pockels cell can be adjusted via fine-threaded screws and has optional special OEM modifications. It is available in a compact and stable design that measures 46 mm x 46 mm x 40 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 µm - 5 µm, Mid-IR Spectrometers for MIR Spectroscopy Applications | |
Spectrometer
from NLIR
|
| The NLIR-S2050 from NLIR are Mid-infrared Spectrometers that have an optical bandwidth of 2 µm - 5 µm. They have spectral resolutions of 6 cm-1, 3 cm-1 & 2.5 cm-1 with maximum readout rates of 400 Hz, 1.4E3 Hz & 130E3 Hz respectively. These vertically polarised spectrometers are ideal for optical coating measurement, 80 kHz MIR spectroscopy, and kHz-rate OCT applications. |
| |
Download Datasheet
Product Details | |
|
