| New Photonics Products this Week |
|
|
|
|
|
|
|
|
|
|
|
|
| 1053/1064 nm Q-Switched DPSS Lasers for Flash Photolysis Applications | |
Laser
from Quantum Light Instruments
|
| The Q1 series from Quantum Light Instruments are DPSS Lasers that operate at a wavelength of 1053 nm or 1064 nm. They deliver an average output power of up to 0.5 W and have a pulse energy of less than 40 mJ. These Q-Switched lasers are ideal for LIBS, Time-of-flight spectroscopy (TOFS), light-induced fluorescence (LIF) spectroscopy, flash photolysis, and laser ablation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1064 nm Picosecond Laser for Semiconductor Processing Applications | |
Laser
from Photonics Industries
|
| The RX-1064-40 from Photonics Industries is a Picosecond Laser that operates at a wavelength of 1064 nm. It delivers an average power of 40 W (at 1 MHz) and has a pulse energy of 300 μJ (at 200 kHz). This infrared laser is ideal for scribing & marking, medical device laser micro processing, semiconductor processing, and micromachining transparent materials applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1726 nm Multimode Fabry-Perot Laser Diode for Medical Applications | |
Laser Diode
from SemiNex Corporation
|
| The CHP-240 from SemiNex Corporation is a Multimode Fabry-Perot Laser Diode that operates at a wavelength of 1726 nm. It delivers an output power of 3 W and has a spectral width (FWHM) of 12 nm. This continuous wave laser diode has a slope efficiency of 0.28 W/A and power conversion efficiency of 14%. It is ideal for professional and home-use medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm DFB Laser Diode for Spectroscopic Applications | |
Laser Diode
from TOPTICA Photonics
|
| The LD-1550-0100-DFB-1 from TOPTICA Photonics is a Distributed Feedback Laser Diode that operates at a center wavelength of 1550 nm. It has a wavelength range from 1547.8 nm to 1552.2 nm and delivers an output power of 100 mW. This laser diode is ideal for mode-hop-free tuning, electric tuning, fast modulation options, locking to resonance, and spectroscopic applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1040 nm - 1080 nm, Laser Diode for Material Processing Applications | |
Laser Diode
from Monocrom
|
| The A-Stack λ1040-1080 nm from Monocrom is a Laser Diode that operates at a wavelength of 1040 nm - 1080 nm. It delivers an output power of up to 100 W (CW) & 350 W (QCW) and has a wavelength tolerance of ± 5 nm. This actively cooled laser diode is ideal for interstitial laser-induced thermotherapy, aesthetics, odontology, material processing, and defense applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 660 nm Continuous Wave Fabry-Perot Laser Diode | |
Laser Diode
from LD4B
|
| The LD4B-660-FP-100 from LD4B is a Continuous Wave Fabry-Perot Laser Diode that operates at a wavelength of 660 nm. It delivers an output power of 90 mW & 110 mW and has a spectral width of 1 nm. This fiber-coupled laser diode has a slope efficiency of 0.6 mW/mA and polarization extinction ratio above 17. It has a built-in monitor photodiode with a monitor current of 0.8 mA and is RoHS & REACH compliant. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Gentec-EO | | Buyer's Checklist for Laser Power and Energy Meters | | Selecting a laser power or energy meter depends on specific business and application needs. With over 700 instruments, Gentec-EO understands the challenge of finding the right fit. To simplify the process, they’ve created a checklist of key factors to consider. Each point includes a brief overview and links to helpful resources. Click here to learn more. | | | |
|
|
| 800 nm Fiber-Coupled Superluminescent Diode | |
Superluminescent Diode
from Exalos
|
| The EXS210111-01 from Exalos is a Fiber-Coupled Superluminescent LED (SLED) that operates at a mean wavelength of 800 nm. It has a central wavelength of 799.1 nm (at 3 dB) & 800.5 nm (at 10 dB) and delivers a maximum power of 10.21 mW. This flat top SLD has a bandwidth of 38.6 nm (3 dB) & 51 nm (10 dB), monitor photodiode current of 4811 μA, and an ASE ripple of 0.02 dB. It requires a DC supply voltage of 2 V and consumes 160 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.12 µm - 1.85 µm, SWIR Sensor for Hyperspectral Imaging Applications | |
SWIR Sensor
from Hamamatsu Photonics
|
| The G16562-0808T from Hamamatsu Photonics is an InGaAs SWIR Sensor that has a spectral range of 1.12 μm - 1.85 μm. It has a resolution of 320 x 256 (81,920 pixels) and an effective pixel of 320 x 256 (81,920 pixels). This SWIR sensor has a pixel size of 20 μm x 20 μm and pixel pitch of 20 μm. It is ideal for hyperspectral imaging and traffic monitoring applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1064 nm Acousto-Optic Mode Locker for Low Power Laser Application | |
Acousto-Optic Mode Locker
from Laser 2000
|
| The FSML-50-20-BR-1064 from Laser 2000 is a Fused Silica Acousto-Optic Mode Locker that operates at a wavelength of 1064 nm. It has an active aperture of 3 mm x 3 mm and a carrier frequency of 50 MHz. This acousto-optic mode locker is ideal for low-power lasers, MHz/GHz RF frequency modulation rate, analog light intensity modulation, and digital switching on/off applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Monochromators for Analyzing X-Rays & Spectroscopy Applications | |
Monochromator
from Inrad Optics Inc.
|
| The X-ray Monochromator from Inrad Optics Inc. is a Monochromator that uses diffraction crystals such as Quartz, Si, Ge, LiNbO3, InSb, KAP, and RbAP. It has an orientation accuracy of ± 10 arcsec (absolute) and ± 2 arcsec (relative) and an assembly diameter of up to 250 mm. This monochroator is ideal for focusing & analyzing x-rays, and spectroscopy & imaging of hot dense plasmas. |
| |
Download Datasheet
Product Details | |
|
|
|
| 900 nm - 1650 nm, Optical Power Meters for Light Measurement Applications | |
Optical Power Meter
from Beijing Rofea Optoelectronics
|
| The OPM-A from Beijing Rofea Optoelectronics are InGaAs Optical Power Meters that operate at a wavelength of 900 nm - 1650 nm. They have a calibration wavelength of 1310 nm or 1550 nm and linearity of 0.46%. These fiber-coupled optical power meters are ideal for laboratory optical device testing and advanced measurement of light measurement technology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 nm - 1700 nm, Optical Power Meter for Power Measurement Applications | |
Optical Power Meter
from EXFO Inc.
|
| The FTBx-1750-031-1/2/4 from EXFO Inc. is an InGaAs Optical Power Meter that operates at a wavelength of 800 nm - 1700 nm. It has a wavelength resolution of 0.01 nm and linearity of ± 0.015 dB. This optical power meter features configurations with one, two, or four 1 mm InGaAs detectors. It has a power range from -85 dBm to 8 dBm and is ideal for flexible power measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 24.5 Megapixel sCMOS Camera for Quantum Imaging Applications | |
Scientific & Industrial Camera
from First Light Imaging
|
| The C-BLUE 2 from First Light Imaging is a 24.5 Megapixel sCMOS Camera that has a resolution of 5328 (H) x 4608 (V) pixels. It has a global shutter that delivers a frame rate of 361 fps (10-bit) - 37 fps (16-bit) with CXP and 188 fps (8-bit) - 24 fps (16-bit) with Gig-E interface. This back illuminated camera is ideal for low-mag fluorescence microscopy and quantum imaging applications. |
| |
Download Datasheet
Product Details | |
|
