| New Photonics Products this Week |
|
|
| 1053/1064 nm Q-Switched DPSS Lasers for Laser Ablation Applications | |
Laser
from Quantum Light Instruments
|
| The Q2 series from Quantum Light Instruments are DPSS Lasers that operate at a wavelength of 1053 nm or 1064 nm. They deliver an average output power of up to 2 W and have a pulse energy of less than 80 mJ. These Q-Switched lasers are ideal for LIBS, TOFS, LIF spectroscopy, flash photolysis, pulsed light deposition (PLD), laser ablation/cleaning, and ophthalmology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1030 nm Femtosecond Laser for Scientific Applications | |
Laser
from Light Conversion
|
| The FLINT FL2 from Light Conversion is a Femtosecond Laser that operates at wavelengths of 1030 nm. It delivers a maximum output power of 5 W & 20 W and has a wavelength accuracy of ± 10 nm. This linearly & horizontally polarized laser has a pulse energy of up to 0.25 µJ & 0.5 µJ and repetition rate of 10 MHz, 40 MHz & 80 MHz. It has a maximum beam quality factor (M2) of less than 1.2 and is ideal for industrial & scientific applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1310 nm Single-Mode Laser Diode for Medical & Datacom Applications | |
Laser Diode
from SemiNex Corporation
|
| The CHP-248 from SemiNex Corporation is a Single-Mode Fabry-Perot Laser Diode that operates at a wavelength of 1310 nm. It delivers an output power of 0.45 W and has a spectral width (FWHM) of 15 nm. This continuous wave laser diode has a slope efficiency of 0.5 W/A and is ideal for professional medical, FMCW LiDAR, datacom, data centers & OTDR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 520 nm Fiber-Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M520±10-5-F105/22-C1S-P from PhotonTec Berlin is a Laser Diode that operates at a wavelength of 520 nm. It delivers an output power of 5 W and has a spectral width below 10 nm (FWHM). This laser diode has a slope efficiency of 0.8 W/mA and power conversion efficiency of 15%. It has a numerical aperture of 0.22 with fiber lengths of 1 m, 2 m, and 5 m. It has a thermistor resistance of 10 kOhms and monitor photodiode current of 100 μA - 1000 μA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 780 nm - 830 nm, Laser Diode for Material Processing Applications | |
Laser Diode
from Monocrom
|
| The CS-Mount 780-830 nm from Monocrom is a Laser Diode that operates at a wavelength of 780 nm - 830 nm. It delivers an output power of up to 100 W (CW) & 500 W (QCW) and has a wavelength tolerance of ± 5 nm. This actively cooled laser diode is ideal for odontology, material processing, ophthalmology, surgical cardiology, hair removal, and printing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 900 nm - 1700 nm, PIN Photodiode for Industrial Applications | |
Photodiode
from LD4B
|
| The PD4B-200-P20-1G-K from LD4B is a PIN Photodiode that operates at a wavelength of 900 nm - 1700 nm. It has a bandwidth of 1 GHz and responsivity of 1 A/W (at 1550 nm). This photodiode has a capacitance of 3 pF, dark current of 0.05 nA, and return loss of 16 dB & 30 dB. It requires a DC supply voltage of 5 V and is ideal for scientific & industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| UV-Grade Fused Silica Optical Filter for Yb:YAG Harmonic Generation | |
Optical Filter
from OPTOMAN
|
| The PP-UVFS-12.7-3.0-DM438-AR804EL from OPTOMAN is an Ultrafast Wavelength Separator Optical Filter that has a diameter of 12.7 mm and thickness of 3 mm. It has a clear aperture above 80% and surface quality of 10-5 S-D (scratch-dig) on both sides (S1/S2). This optical filter has a surface flatness of up to lambda/10 (at 633 nm) and is ideal for Yb:YAG I, II, & IV harmonic generation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 225/550/1100/2200 nm Monochromator for Deep UV Applications | |
Monochromator
from McPherson
|
| The Monarch from McPherson is a Monochromator that operates at a wavelength of 225 nm (2400 g/mm), 550 nm (1200 g/mm), 1100 nm (600 g/mm), and 2200 nm (300 g/mm). It has a wavelength accuracy of ± 0.1 nm and reproducibility of ± 0.025 nm (1200 g/mm). This monochromator has an angle of incidence of 32 degrees and is ideal for any deep UV or vacuum ultraviolet application. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 nm - 2000 nm, Optical Frequency Comb for Spectroscopy Applications | |
Optical Frequency Comb
from Menlo Systems
|
| The FC1500-ULNnova from Menlo Systems is an Optical Frequency Comb that operates at a wavelength of 500 nm - 2000 nm. It delivers an average output power above 10 mW (from each laser port) and has a spectral range of greater than 25 nm. This linearly polarized OFC is ideal for calibration of lasers, high-resolution spectroscopy, and low-noise microwave generation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 0.3 Megapixel SWIR InGaAs Camera for Hyperspectral Imaging Applications | |
Scientific & Industrial Camera
from Xenics
|
| The XEN-000947 from Xenics is a 0.3 Megapixel SWIR InGaAs Camera that has a resolution of 640 x 512 pixels. It has a snapshot global shutter that delivers a frame rate of up to 1700 Hz. This camera has a spectral range of 900 nm - 1700 nm and pixel pitch of 20 μm. It can be controlled via a CXP interface and is ideal for hyperspectral imaging & semiconductor manufacturing with in-line inspection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.3 Megapixel CMOS Color Camera | |
Scientific & Industrial Camera
from CIS Corporation
|
| The VCC-VCL3R from CIS Corporation is a 0.3 Megapixel CMOS Camera that has a VGA resolution of 640 (H) x 480 (V) pixels. It has a global shutter with a variable range of 1/10000 that delivers a frame rate of 537.6 fps (3 tap), 267.7 fps (2 tap), and 133.8 fps (1 tap). This color camera has a pixel size of 4.8 μm x 4.8 μm and clock frequency of 72 MHz or 36 MHz. It has a Python 300 1/4 CMOS sensor and 8-bit/10-bit ADC output format. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 200 nm - 900 nm, Multi-Channel Spectrometer for Metrology Applications | |
Spectrometer
from Hamamatsu Photonics
|
| The C16736-01 from Hamamatsu Photonics is a Multi-Channel Spectrometer that operates at a wavelength of 200 nm - 900 nm. It has a wavelength resolution (FWHM) of 0.85 nm and wavelength accuracy of ±0.1 nm. This spectrometer is ideal for laser evaluation, plasma physics, thin film metrology, optical density measurement, photochemistry and Raman spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Spectrometer for Raman Spectroscopy Applications | |
Spectrometer
from Wasatch Photonics
|
| The WP 1064 XL from Wasatch Photonics is a Raman Spectrometer that operates at a wavelength of 1064 nm. It has a spectral range of 200 cm-1 - 2000 cm-1 and an optical resolution of 8 cm-1 (using a 25 µm slit at f/1.5 input aperture). This spectrometer features an optical bench based on Volume Phase Holographic (VPH) gratings and is ideal for Raman spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
