| New Photonics Products this Week |
|
|
| 515 nm Pulsed Laser for Laser Cutting & Scribing Applications | |
Laser
from AdValue Photonics
|
| The AP-515P from AdValue Photonics is a Pulsed Laser that operates at a wavelength of 515 nm. It delivers average powers of 10 W, 15 W, 20 W & 30 W and has a pulse width of 50 ps. This laser has is ideal for laser cutting, drilling & scribing, laser thin film patterning (TCO, metal, thin film solar cells), 2.5D surface shaping, and laser marking applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 515 nm Femtosecond Laser for Micromachining Applications | |
Laser
from Photonics Industries
|
| The FS-515-4 from Photonics Industries is a Femtosecond Laser that operates at a wavelength of 515 nm. It delivers an average power of 4 W (at 1 MHz) and has a pulse energy of 4 μJ (at 1 MHz). This laser is ideal for micromachining, 3D micro structuring & drilling, diamond marking & drilling, semiconductor & LIPSS, multiphoton microscopy, and CNC micro-fabrication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 450 nm Laser for Material Processing & Machine Vision Applications | |
Laser
from Power Technology Inc.
|
| The Grande3(450-3) from Power Technology Inc. is a Laser that operates at a wavelength of 450 nm. It delivers an average power of 3 W and has a wavelength tolerance of ± 5 nm. This linearly polarised laser has a beam size of 0.97 mm x 3.13 mm and beam divergence of 7.8 mrad x 2.5 mrad. It is ideal for light-duty material processing, localized heating, display, and machine vision applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1070 nm Fiber Laser for Thin & Thick Sheet Cutting Applications | |
Laser
from Coherent Corp.
|
| The EDGE FL3 from Coherent Corp. is a Fiber Laser with a wavelength of 1070 nm. It delivers an output power of 3 kW and has a wavelength tolerance of ± 10 nm. This continuous wave laser has a pulse frequency range of 5 kHz (full depth modulation) and beam parameter product of 1.5 mm x mrad (at 50 μm). It is ideal for thin & thick sheet cutting and reflective material cutting applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 375 nm Light Bar Chip-on-Board LED for Large Area Illumination | |
LED
from Violumas
|
| The VC12X1C45L6-375 from Violumas is a 12-LED light bar chip-on-board (COB) UV LED Module that operates at a wavelength of 375 nm. It delivers an output power of 32.8 W and has a radiant flux of 9 W. This COB LED has a beam angle of 60 degrees with fused silica lens and Transient-Voltage-Suppression (TVS) built in for ESD protection. It is ideal for large-area UV applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 µm - 14 µm, Pulsed Infrared Thermal Emitter | |
Infrared Emitter
from Thorlabs Inc
|
| The HPIR103 from Thorlabs Inc is an Infrared Thermal Emitter with a wavelength of 2 µm - 14 µm. It has an emitter size of 40 mm2 and emissivity of greater than 0.9. This thermal emitter has an emitter temperature of 630 °C and a modulation depth of 70% (at 2.5 Hz). It requires a DC supply voltage of 3.8 V, consumes 660 mA of current, and dissipates 2.5 W of power. This infrared emitter has a Winston cone collimator, soldered BaF2 window, and an integrated reflector. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Fiber Optic Transceiver for ADAS & Automotive Applications | |
Fiber Optic Transceiver
from KDPOF
|
| The KD9351 from KDPOF is a Fiber Optic Transceiver (FOT) that operates in two modes: 100 Mb/s mode and 1 Gb/s mode. It has a bit error rate of less than 10-12 and an extinction ratio (ER) of 15 dB (for link budget maximization). This FOT is ideal for communications in vehicle data networks, interconnection of infotainment, ADAS Electronic Control Units, and automotive applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm UV-Grade Fused Silica Beam Splitter | |
Beam Splitter
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-NPBS14-AR622 from OPTOMAN is a Non-Polarizing Beam Splitter that operates at a wavelength of 1550 nm. It has a diameter of 25.4 mm, thickness of 6.35 mm, and chip size of less than 0.2 mm. This UV-grade fused silica (UVFS) beam splitter has a clear aperture above 20 mm and surface quality of 20-10 scratch-dig on both sides (S1/S2). It has an ion beam sputtering coating with angle of incidence of 45 deg. |
| |
Download Datasheet
Product Details | |
|
|
|
| 840 nm Semiconductor Optical Amplifier for Power Boosting Applications | |
Optical Amplifier
from Superlum
|
| The A840.50.20 from Superlum is a Semiconductor Optical Amplifier that operates at a wavelength of 840 nm. It delivers an output power of up to 20 mW and has a fiber-to-fiber gain of 20 dB. This optical amplifier has a small signal gain bandwidth of 50 nm and gain ripple of 0.2 dB. It is ideal for power boosting, active media for tunable lasers, and swept source applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 192 nm - 2250 nm, Spectrometers for Laser Lineshape Monitoring | |
Spectrometer
from HighFinesse
|
| The LSA Series from HighFinesse are Spectrometers that have a measurement range of 192 nm - 2250 nm. They have a maximum linewidth (FWHM) of 0.6 THz - 1.5 THz and measurement speed of 60 Hz - 500 Hz. These spectrometers are ideal for monitoring the lineshape of lasers during optical adjustment and for the production certification of laser linewidths & lineshapes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 850/1310/1550 nm, Fiber Optic Switch for Measuring Device Characteristics | |
Fiber Optic Switch
from Yokogawa Electric Corporation
|
| The AQ2200-412 from Yokogawa Electric Corporation is a Fiber Optic Switch that operates at a wavelength of 850 nm/1310 nm or 1310 nm/1550 nm. It has an insertion loss of 1 dB and is ideal for measuring multiple objects (with switching of the object to be measured), measuring device characteristics & for building a measurement system in combination with a bit error tester. |
| |
Download Datasheet
Product Details | |
|
