| New Photonics Products this Week |
|
|
| 200 nm - 1100 nm, Spectrometers for LED Analysis Applications | |
Spectrometer
from PhotonTec Berlin
|
| The Aurora4000 from PhotonTec Berlin are Spectrometers that operate at a wavelength of 200 nm - 1100 nm. They have an optical resolution (FWHM) of 0.75 nm - 6.61 nm and entrance slit width of 10 µm - 200 µm. These spectrometers are ideal for laser spectral analysis, fluorescence spectral analysis, Raman spectral analysis, film thickness measurement, and LED analysis applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1064 nm Fabry-Perot Laser Diode for Sensing Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The EYP-RWL-1060-00750-4000-FLW01-0006 from TOPTICA EAGLEYARD is a Laser Diode with a wavelength of 1064 nm. It delivers a minimum output power of 650 mW and has a spectral width (FWHM) of 0.3 nm. This single mode laser diode has a transverse electric polarization and beam divergence of 5 deg (parallel) & 20 deg (perpendicular). It is ideal for sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1940 nm Thulium-Doped Fiber Laser for LiDAR Applications | |
Laser
from JPT Electronics
|
| The TDFLC-20-L-A from JPT Electronics is a Thulium-Doped Fiber Laser that has a central wavelength of 1940 nm. It delivers an average output power of over 20 W and a 3 dB spectral width of less than 6 nm. This laser has a maximum modulation frequency of 20 kHz and is ideal for biomedical, plastic welding, atmospheric detection, LiDAR, scientific & optical resin cutting applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1525 nm - 1575 nm, Tunable Fiber Ring Laser for OTDR Applications | |
Laser
from Advanced Photonics International
|
| The CL-16cw from Advanced Photonics International is a Tunable Fiber Ring Laser that has a tuning range of 1525 nm - 1575 nm. It delivers an output power of up to 45 mW and has a peak power above 16 dBm. This C-band laser is ideal for use as a laser source in optical time-domain reflectometers (OTDRs), fiber network testing, fault detection, and calibration applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 532 nm Diode Pumped Solid State Laser | |
Laser
from Advanced Photonic Sciences
|
| The MiniGreen A50 from Advanced Photonic Sciences is a Diode Pumped Solid State Laser that operates at a wavelength of 532 nm. It delivers an output power of 50 W and has a full angle beam divergence of 8 mrad. This laser produces a beam of diameter 100 μm and has a beam quality factor (M2) of 1.4. It requires a DC supply voltage of 2.2 V, consumes 0.6 A of current, and dissipates 1.3 W of power. This Class 3B laser is available in a Ø9 mm can package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1387 nm - 4000 nm, Picosecond OPO Lasers for Microscopy Applications | |
Laser
from Radiantis
|
| The Zenith from Radiantis are Picosecond Optical Parametric Oscillator (OPO) Lasers that have a tuning range of 1387 nm - 2020 nm (signal) and 2100 nm - 4000 nm (Idler). They deliver an output power of over 2 W & 4 W (signal) and are ideal for linear & non-linear spectroscopy & microscopy (SHG, THG, two-photon, multiphoton), plasmonics, & pump-probe spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 635 nm Red Dot Laser Module for Pointing Applications | |
Laser
from IMM Photonics
|
| The IMM1020-635-1-C from IMM Photonics is a Red Dot Laser Module that operates at a wavelength of 635 nm. It delivers a continuous wave output power of 0.95 mW and has a power stability of less than 6%. This homogeneous line laser produces a circular beam of diameter 0.7 mm and is ideal for pointing, alignment laser, laboratory instrument & sensor applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by PhotonTec Berlin | | High-Power Fiber-Coupled Diode Laser | | Diode laser is also called semiconductor laser which generates laser irradiation by electrical pumping diode chips. PhotonTec Berlin focuses on the diode laser with optical fiber (fiber-coupled diode laser). The laser irradiation is coupled to a single optical fiber which delivers the laser beam easily and flexibly to application site. Click here to learn more. | | | |
|
|
| 532 nm Continuous Wave DPSS Laser for Micromachining Applications | |
Laser
from Novanta Photonics
|
| The Ventus solo from Novanta Photonics is a Diode Pumped Solid State Laser that operates at a wavelength of 532 nm. It delivers an output power of 250 mW - 750 mW and has a power stability of up to 0.4% RMS. This continuous wave laser produces a beam of diameter 1.5 ± 0.1 mm and is ideal for laser-based diagnostic, micromachining, & fine material processing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.535 µm Miniature Solid-State Q-Switched Laser | |
Laser
from MegaWatt Lasers
|
| The ER902 from MegaWatt Lasers is a Miniature Solid-State Q-Switched Laser that operates at a wavelength of 1.535 µm. It delivers a peak output power of 50 kW - 75 kW and has a pulse energy of 200 µJ. This diode-pumped laser has a pulse width of 4 ns and repetition rate from single shot to 10 Hz. It has a diffraction limited TEM000 beam profile with a beam quality factor (M2) of up to 1.3 and beam divergence of 7 mrad. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 514 nm Diode Laser | |
Laser
from A.R.C. Laser
|
| The Nuvolas from A.R.C. Laser is a Diode Laser that operates at a wavelength of 514 nm. It delivers an output power of 8 W and has a pulse length & pulse break of 20 ms - 60 s. This continuous wave laser features color touchscreen display and has a red aiming beam laser with a wavelength of 635 nm. This laser requires an AC supply voltage of 110 V - 230 V and consumes 10 A of current. It is available in a module that measures 491 mm x 421 mm x 161 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 970 nm - 983 nm, Free Space Laser Diode | |
Laser Diode
from AixiZ Service & International
|
| The AH980-601230 from AixiZ Service & International is a Free Space Laser Diode with a wavelength of 970 nm - 983 nm. It delivers an output power of 60 mW and has a threshold current of 15 mA. This laser diode has an internal automatic current control driver and adjustable focusing lens. It has a laser diode reverse voltage 2 V and photodiode reverse voltage of 30 V. This laser diode requires a DC supply voltage of 1.5 V and consumes 95 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 nm - 1100 nm, Silica Fiber Optic Cable for Illumination Applications | |
Fiber Optic Cable
from Armadillo SIA
|
| The ArmD® UV-HC from Armadillo SIA is a Silica Fiber Optic Cable that has a spectral range of 300 nm - 1100 nm. It has a core diameter of 100 μm - 2000 μm and numerical apertures (NA) of 0.37, 0.48, 0.52, 0.57 & 0.62. This fiber optic cable features an all-dielectric & non-magnetic design with a step-index profile and is ideal for remote illumination & photodynamic therapy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm - 700 nm, TeO2 Acousto-Optic Tunable Filter for Imaging Applications | |
Acousto-Optic Tunable Filter
from AA Opto Electronic
|
| The AOTFnC-VIS-TN from AA Opto Electronic is a Bandpass Acousto-Optic Tunable Filter (AOTF) that operates at a wavelength of 450 nm - 700 nm. It has an optical transmission above 95% and active aperture of 3 mm x 3 mm. This AOTF has a spectral resolution of up to 1.5 nm and static extinction ratio of greater than 50 dB. It is ideal for confocal microscopy and life science imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7.5 µm - 13 µm, Optical Parametric Oscillator for LiDAR Applications | |
Optical Parametric Oscillator
from Teem Photonics
|
| The Mid-IR OPO from Teem Photonics is a Mid-Infrared (MIR) Tunable Optical Parametric Oscillator that has a tuning range of 7.5 µm - 13 µm or 3 µm - 5µm (optional). It delivers a peak power of 5 W and maximum power of 100 W. This single longitudinal mode OPO is ideal for stand-off gas detection, multi-species gas analysis, and LiDAR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.33 Megapixel SWIR Cameras for Bio-imaging Applications | |
Scientific & Industrial Camera
from Photon etc.
|
| The ZephIR 1.7 from Photon etc. are 0.33 Megapixel SWIR Cameras that have spectral ranges of 500 nm - 1700 nm and 900 nm - 1700 nm. They have a resolution of 640 (H) x 512 (V) pixels and pixel size of 15 µm. These infrared cameras are ideal for NIR-II or SWIR bio-imaging, photovoltaics characterization & semiconductor wafer, and device failure SWIR inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.3 Megapixel iCMOS Camera for Raman Spectroscopy Applications | |
Scientific & Industrial Camera
from Photek
|
| The iCMOS 160 from Photek is a 2.3 MP Intensified-CMOS Camera that has a resolution of 1920 x 1200 pixels. It has a pixel size of 5.86 μm and pixel clock of 30 MHz - 480 MHz. This camera is ideal for time-resolved fluorescence imaging & spectroscopy, plasma physics, combustion diagnostics, Raman spectroscopy, and bio or chemiluminescence imaging applications. |
| |
Download Datasheet
Product Details | |
|