Latest Photonics News & White Papers. View it in your browser
| | | Weekly Edition | | | Date: 27 October 2025 | | | |
| Latest Photonics News this Week |
|
|
| New White Papers & Articles |
|
|
| Featured Products this Week | |
|
| 520 nm Green Dot Laser for Pointing & Sensor Applications | |
Laser
from IMM Photonics
|
| The IMM1040-520-5-E-X from IMM Photonics is a Green Dot Laser that operates at a wavelength of 520 nm. It delivers an output power of 5 mW and has a power stability of less than 6%. This Class 1 or Class 3B laser produces a beam of diameter 1 mm x 3 mm and has a beam divergence of 0.4 mrad. It is ideal for pointing, alignment lasers, measuring instruments, and sensor applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| 355 nm Ultraviolet Lasers for Cutting & Scribing Applications | |
Laser
from JPT Opto-Electronics
|
| The LARK 355-3/5 from JPT Opto-Electronics are UV Lasers that operate at a wavelength of 355 nm. They deliver an average output power of over 5 W and have a pulse width of less than 20 ns. These lasers have a frequency range of 20 kHz - 200 kHz, power stability of 3%, and pulse-to-pulse stability of up to 3%. They are ideal for wafer scribing, IC package trimming & solar cell scribing applications. |
| |
Download Datasheet
Product Details | |
| | |
| 1030 nm Femtosecond Laser for Beamline Laser Applications | |
Laser
from Class 5 Photonics
|
| The Black Dwarf 200 from Class 5 Photonics is a Femtosecond Laser that has a central wavelength of 1030 nm. It delivers an average output power of 60 W with a power stability of less than 0.5% rms. This laser has a compressed pulse energy of 30 µJ - 200 µJ and pulse duration of 35 fs. It is ideal for high-flux EUV HHG sources, time-resolved ARPES, metrology, and attosecond science applications. |
| |
Download Datasheet
Product Details | |
| | |
| 532 nm DPSS Laser for Material Processing Applications | |
Laser
from Novanta Photonics
|
| The axiom 532 from Novanta Photonics is a DPSS Laser that operates at a wavelength of 532 nm. It delivers an output power of 4 W - 12 W and has a power stability of up to 0.1% RMS (less than 10 W) & 0.05% (10 W - 12 W). This continuous wave laser is ideal for laser-based diagnostic, analytical, micromachining, and fine material processing applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | | |
|
| | |
| 3.6 kV Pockels Cell Drivers for Spectroscopy Applications | |
Pockels Cell Driver
from EKSPLA
|
| The PCD-UHR-50-3.6 from EKSPLA is a Pockels Cell Driver that has a maximum pulse amplitude of 3.6 kV. It has a maximum repetition rate of 50 kHz and pulse duration of 100 ns - 5000 ns. This pockels cell driver is ideal for micromachining, welding, cutting, ophthalmology, dermatology, surgery, fusion research, spectroscopy, and high-energy physics applications. |
| |
Download Datasheet
Product Details | |
| | |
| | |
|
| | |
| 900 nm - 1700 nm, SWIR Camera for Beam Profiling Applications | |
Scientific & Industrial Camera
from Photon etc.
|
| The Alizé 1.7s from Photon etc. is a 0.33 Megapixel SWIR Camera that has a spectral range of 900 nm - 1700 nm. It has a resolution of 640 (H) x 512 (V) pixels and pixel size of 15 µm. This infrared camera has an InGaAs FPA sensor and is ideal for semiconductor wafer, NIR-II or SWIR bio-imaging, photovoltaics characterization & laser beam profiling applications. |
| |
Download Datasheet
Product Details | |
|
| | About GoPhotonics | | GoPhotonics keeps you up to date with the Photonics Industry with New Products, News, Upcoming Events and more. We have the largest searchable database of Photonics products that consist of Lasers, CMOS Image Sensors, Optical Components and Test & Measurement Equipment. Would you like to Unsubscribe? If so, click here. |
|
| To unsubscribe please click here | {{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}} |
|
