| New Photonics Products this Week |
|
|
| 1310/1550 nm Reflectometer for Reflection & Insertion Loss Measurements | |
Reflectometer
from Yokogawa Test & Measurement Corporation
|
| The AQ7421 from Yokogawa Test & Measurement Corporation is a High-Resolution Reflectometer that delivers clean and accurate measurements for testing optical components and devices. This device provides a clear analysis of waveguide reflections & propagation loss, capturing sharp peaks and scattered light to enable direct calculation of propagation loss from return loss distribution. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 915 nm Fiber-Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M915±10-170-F105/22-DK-P from PhotonTec Berlin is a Laser Diode that operates at a wavelength of 915 nm. It delivers an output power of 170 W and has a maximum spectral width (FWHM) of 10 nm. This laser diode has 95% energy enclosed within a numerical aperture (NA) of 0.17 and wavelength temperature coefficient of 0.35 nm/°C. It has an optical fiber with a numerical aperture of 0.22, core/cladding diameter of 105 μm/125 μm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 770 nm Single Frequency Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini ECDL series from TOPTICA EAGLEYARD is a Single Frequency Laser Diode that operates at a center wavelength of 770 nm. It delivers an output power of up to 80 W and has a linewidth (FWHM) of 0.1 MHz. This external cavity laser diode is ideal for spectroscopy, metrology, atomic clock, cold atom interferometry, and quantum technology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 193 nm Laser Mirror for Ultraviolet Laser Applications | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM290 from OPTOMAN is a Laser Mirror that operates at a wavelength of 193 nm. It has a diameter of 25.4 mm, thickness of 6.35 mm, and chip size of less than 0.2 mm. This deep UV mirror has a clear aperture of 22 mm and surface quality of 10-5 S-D (scratch-dig) (S1/S2). It has a maximum surface flatness of 1/10th of wavelength (at 633 nm) and is ideal for ultraviolet (UV) laser applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1542 nm Fiber Laser for Laser Cooling Applications | |
Laser
from Vescent
|
| The STABILASER 1542E from Vescent is a Fiber Laser that operates at a wavelength of 1542.38 nm (vacuum). It has an optional frequency-doubler module, which converts (via second harmonic generation) part of the 1542 nm output into 771.19 nm output. This laser delivers an output power of 20 mW (1542 nm) & 5 mW (771 nm) and is ideal for frequency comb & length metrology stabilization, and laser cooling applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 nm - 1950 nm, Tunable OPO Laser for Microscopy Applications | |
Laser
from APE Angewandte Physik & Elektronik GmbH
|
| The picoEmerald S from APE Angewandte Physik & Elektronik GmbH is a Tunable Optical Parametric Oscillator (OPO) Laser that operates at wavelengths of 1032 nm, 700 nm - 990 nm (signal), and 1080 nm - 1950 nm (idler). It is ideal for coherent anti-Stokes Raman spectroscopy & microscopy, stimulated Raman spectroscopy, and second harmonics imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.535 µm Miniature Solid-State Q-Switched Laser | |
Laser
from MegaWatt Lasers
|
| The ER902 from MegaWatt Lasers is a Miniature Solid-State Q-Switched Laser that operates at a wavelength of 1.535 µm. It delivers a peak output power of 50 kW - 75 kW and has a pulse energy of 200 µJ. This diode-pumped laser has a pulse width of 4 ns and repetition rate from single shot to 10 Hz. It has a diffraction limited TEM000 beam profile with a beam quality factor (M2) of up to 1.3 and beam divergence of 7 mrad. |
| |
Download Datasheet
Product Details | |
|
|
|
| 594 nm Visible Laser for Flow Cytometry Applications | |
Laser
from QD Laser
|
| The QLD0593-9420 from QD Laser is a Visible Laser Module that operates at a wavelength of 594 nm. It delivers an output power of 20 mW and has a beam divergence (FWHM) of 5 deg (parallel) & 10 deg (perpendicular). This laser has a beam quality factor (M2) of 1.2 and polarization extinction ratio of 30 dB. It is ideal for spectroscopy, fluorescence microscope, time resolved measurement, flow cytometry, and biomedical microscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1030 nm Yb Femtosecond Laser for Microscopy Applications | |
Laser
from Cycle GmbH
|
| The SONATA from Cycle GmbH is a Yb Femtosecond Laser with a wavelength of 1030 nm. It delivers an output power of 10 mW (fiber output) & 100 mW (free-space output) and has a spectral bandwidth above 14 nm. This laser is ideal for ultrafast pump-probe experiments with synchronization, seeding high-power amplifiers, ASOPS setups, and nonlinear microscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Yokogawa | | See the signal, not the noise | | The AQ7421 High-Resolution Reflectometer captures true reflection profiles with high sensitivity and resolution for IL/RL diagnostics, minimizing spurious effects. Ideal for transceiver, connector, and fiber assembly evaluation. Click here to learn more. | | | |
|
|
| InGaAs Triple H SWIR Sensor for Optical Metrology & Welding Applications | |
SWIR Sensor
from New Imaging Technologies
|
| The NSC2001 from New Imaging Technologies is an InGaAs Triple H SWIR Sensor that has a resolution of 320 (H) x 256 (V) pixels. It has a pixel size of 15 µm x 15 µm and noise level of up to 50 e-. This SWIR sensor operates in linear & logarithmic modes and has a dynamic range above 120 dB. It is ideal for optical metrology & testing, welding, and laser communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 350 nm - 430 nm, Acousto-Optic Tunable Filter for Fluorescence Imaging | |
Acousto-Optic Tunable Filter
from Photon Lines
|
| The AOTFnC-UV from Photon Lines is a Tunable Bandpass Acousto-Optic Tunable Filter that operates at a wavelength 350 nm - 430 nm. It has an active aperture of 2 mm x 2 mm and a field of view of 1 degree. This linearly polarised AOTF has a tuning time of less than 2 µs and is ideal for fluorescence imaging, AOTF spectrometers & multi-spectral imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 532 nm Optical Frequency Converter for LiDAR & Sensing Applications | |
Optical Frequency Converter
from LD-PD Inc
|
| The PPLN-SHG1064-P6-P2-H from LD-PD Inc. is an Optical Frequency Converter that has an output wavelength of 532 nm. It has an input wavelength of 1064 nm and delivers an output power above 100 mW (with 700 mW pump). This linearly polarised optical frequency converter is ideal for quantum secure communication, LiDAR, optical sensing, and laser display applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 335 nm - 2500 nm, Handheld Reflectometer for LiDAR Applications | |
Reflectometer
from Surface Optics
|
| The 410-SOLAR from Surface Optics is a Handheld Reflectometer that operates at a wavelength of 335 nm - 2500 nm. It has a beam spot size of 0.25" and beam angle of 3 deg (half cone angle). This reflectometer has an accuracy of 0.02 and is ideal for analyzing cool building materials, space coatings, defense & aerospace coatings, radiative heat transfer & LiDAR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Interferometer for Flatness Measurement Applications | |
Interferometer
from Plano Optics Private Limited
|
| The Gracing Incidence Interferometer from Plano Optics Private Limited is an Interferometer that has a resolution of 0.03 μm. It has an accuracy of 0.1 μm - 0.4 μm + 2% of the measured value and a repeatability of 0.03 μm. This interferometer has a sensitivity of 0.5 μm, 1 μm, 2 μm, and 4 μm per fringe and flatness of 0.06 μm. It is ideal for applications such as flatness measurement of reflective or non-reflective surfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
