| New Photonics Products this Week |
|
|
| Opto-Mechanical Software for Optimization of illumination and Optical Systems | |
Optical Design Software
from Lambda Research Corporation
|
| The TracePro from Lambda Research Corporation is an Opto-Mechanical Software that facilitates the design, analysis, and optimization of optical & illumination systems. It uses a CAD-based interface, interactive layout & optimization tools, and is ideal for a wide range of applications, including lightpipe design, displays, solar collectors, daylighting, biomedical optics, and UV sterilization. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 µm - 5 µm, Dual-Lens Collimator for MIR Spectroscopy Applications | |
Collimator
from NLIR
|
| The SAMPLER from NLIR is an effective tool designed to capture MIR light from a specific point and couple it into a fiber. It has an optical bandwidth of 2 µm - 5 µm, a collection spot size of 1 mm - 2 mm, and working distance of 146 mm. This collimator is ideal for samples exhibiting any degree of diffuse reflectance, large free-space light sources, and MIR spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm Fiber-Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M450±10-50-F100/22-B50-AP from PhotonTec Berlin is a Laser Diode with a wavelength of 450 nm. It delivers an output power of 50 W and has a spectral width of 6 nm (FWHM). This laser diode has a slope efficiency of 21.5 W/mA and power conversion efficiency of 34%. It supports an SMA 905 fiber connector and has a fiber length of 1 m - 5 m. This laser diode has a thermistor resistance of 10 kOhms and red aiming beam with a wavelength of 650 nm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 760.9 nm DFB Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 760.9 nm. It delivers an output power of 12 mW and has a linewidth (FWHM) of 2 MHz. This laser diode has a temperature coefficient of wavelength of 0.06 nm/K and is ideal for spectroscopy, metrology & oxygen detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| UV Fused Silica Laser Mirror for Yb:YAG I Harmonic Generation | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM134 from OPTOMAN is an Ultrafast Laser Mirror that operates at a wavelength of 1030 nm (near total reflection) and 630 nm - 660 nm (partial reflectivity). It has a diameter of 25.4 mm and thickness of 6.35 mm. This UV-grade fused silica (UVFS) mirror has a surface flatness of 1/4th of wavelength (at 633 nm) and is ideal for Yb:YAG I harmonic generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1534 nm DPSS Laser for LiDAR & Metrology Applications | |
Laser
from RPMC Lasers Inc.
|
| The KAUKAS 2_LAB OEM from RPMC Lasers Inc. is a Diode Pumped Solid State (DPSS) Laser that operates at a wavelength of 1534 nm. It delivers an average output power of 2 mW and has a wavelength tolerance of ± 1 nm. This nanosecond laser is ideal for LiDAR, laser ranging, Laser-Induced Breakdown Spectroscopy (LIBS), metrology, and instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 355 nm Mode-Locked Laser for Flow Cytometry Applications | |
Laser
from MKS | Spectra-Physics
|
| The VanguardTM OneTM from MKS | Spectra-Physics is a Mode-Locked Laser that operate at a wavelength of 355 nm. It delivers an average power of 125 mW and has power stability below 2%. This quasi continious wave laser has a beam quality factor (M2) below 1.2 and is ideal for flow cytometry, cell sorting, wafer inspection, electron microscopy, confocal microscopy & LIF applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 980 nm Fiber-Coupled Laser Diode | |
Laser Diode
from Frankfurt Laser Company
|
| The FRLD-980-3W-FC200-8Pin from Frankfurt Laser Company is a Fiber-Coupled Laser Diode that operates at a central wavelength of 980 nm. It delivers an output power of 3 W and has a spectral width (FWHM) of 6 nm. This laser diode has a temperature drift of 0.3 nm/°C, slope efficiency of 0.9 W/A, and thermistor resistance of 10 ± 5% kOmega. It supports fiber with a diameter of 200 μm (core) & 220 μm (cladding) and numerical aperture of 0.22. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2A Laser Diode Driver for Controlling Seed Diodes in Solid-state Lasers | |
Laser Diode Driver
from PicoLAS GmbH
|
| The BFS-VDIG 03 from PicoLAS GmbH is a Laser Diode Driver that delivers an output current of up to 2 A. It has a pulse duration of 1 ns - 300 ns and rise time of 1 ns. This LDD has a maximum pulse repetition frequency of 2 MHz and resolution of 2 mA. It is available in a module that measures 65 mm x 85 mm x 15 mm and is ideal for controlling seed diodes in solid-state & fiber lasers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Silicon PIN Photodiode for Signal Detection Applications | |
Photodiode
from Edmund Optics
|
| The 57-508 from Edmund Optics is a Silicon PIN Photodiode that has a detectivity of 4.5 x 1012 cm.rt(Hz)/W. It has a responsivity of 0.2 A/W (at 410 nm) and square active area of 0.81 mm2. This unbiased photodiode has a terminal capacitance of 60 pF and rise time of 0.02 μs (at 0 V, 410 nm). It has a shunt resistance of 600 MOhms and is ideal for low signal detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Machice Vision Lens for Inspection Applications | |
Optical Lens
from Computar Optics Group
|
| The M1228-MPX from Computar Optics Group is an Optical Lens that has a focal length of 12 mm. It has an aperture range of F2.8 - F16 (Iris) with a maximum aperture ratio of 1:2.8 and focusing distance from 0.1 m to infinity. This machine vision lens has a back focal length of 10.2 mm and flange back length of 17.53 mm. It has an optical distortion of + 0.13% (2/3"), - 0.03% (1/2") & - 0.05% (1/3") and is ideal for inspection & harsh environment applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 780/1060/1310/1550 nm Fiber Phase Shifter for Laser Systems | |
Optical Phase Shifter
from Luna Innovations
|
| The FPS-002 from Luna Innovations is a Fiber Phase Shifter with wavelengths of 780 nm, 1060 nm, 1310 nm, and 1550 nm. It has a total phase shift above 65π (at 1550nm) and half-wave voltages (vπ) of 2.5 V - 4.5 V (small frame), 0.7 V - 1.5 V (large frames) & 0.1 V - 0.5 V (resonance frequency). This optical phase shifter is ideal for fiber laser systems and fiber interferometer applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 nm Polarization Controller for Optical Coherence Tomography | |
Polarization Controller
from OZ Optics Ltd.
|
| The PFPC-11-800-S-5/125-XX-1-1 from OZ Optics Ltd. is a Fiber Pigtailed Polarization Controller with a wavelength of 800 nm. It has an insertion loss of less than 0.5 dB (connector losses) and a polarization extinction ratio above 40 dB. This polarization controller is ideal for SM & PM fiber launching, fiber lasers, fiber interferometers, and optical coherence tomography (OCT) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1260 nm - 1650 nm, Polarization Controller | |
Polarization Controller
from MKS | Newport
|
| The F-POL-PT from MKS | Newport is a Polarization Controller that operates at a wavelength of 1260 nm - 1650 nm. It has an extinction ratio of 40 dB, return loss above 65 dB, and insertion loss of 0.05 dB. This polarization controller features a patented all-fiber Babinet-Soleil compensator with a rotatable fiber squeezer for precise adjustments. It supports single-mode fiber with a core diameter of 9 µm, cladding diameter of 125 µm, and jacket of 900 µm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 266 nm Femtosecond Optical Frequency Converter | |
Optical Frequency Converter
from Femto Easy
|
| The Nano4th | 266 nm from Femto Easy is a Femtosecond Optical Frequency Converter that operates at a wavelength of 266 nm. It delivers an output power of 170 mW and has a pulse duration below 60 fs. This vertically polarised optical frequency converter has a repetition rate of 80 MHz and conversion efficiency of 8%. It features an all-in-one design with the laser and conversion unit integrated into a single, robust assembly. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| VIS-SWIR Camera for Optical Sorting Applications | |
Scientific & Industrial Camera
from Emberion
|
| The Emberion VS20 GigE from Emberion is a 0.33 Megapixel VIS-SWIR Camera that has an active resolution of 640 (H) x 512 (V) pixels. It has a spectral range of 400 nm - 2000 nm and global & built-in electronic shutter that delivers a frame rate of up to 400 fps (at full VGA). This camera is ideal for semiconductor imaging, optical sorting for food sorting, plastic sorting & recycling, and counterfeit security applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12.3 Megapixel CMOS Camera for Industrial Applications | |
Scientific & Industrial Camera
from LUCID Vision Labs
|
| The ATV124S from LUCID Vision Labs is a 12.3 Megapixel CMOS Camera with a resolution of 4096 (H) x 3000 (V) pixels. It has a global shutter in a 1/1.1" optical format that delivers a maximum frame rate of 184 fps. This camera uses a Sony IMX535 CMOS image sensor and offers both mono & color variances. It has a pixel size of 2.74 µm (H) x 2.74 µm (V) and is ideal for industrial applications. |
| |
Download Datasheet
Product Details | |
|
