| Featured Products this Week |
|
|
| 266 nm - 1930 nm, Cloud-Powered Laser for Metrology Applications | |
Laser
from Modulight, Inc.
|
| The ML6600 from Modulight is a Cloud-Powered Laser Solution Platform that operates at a wavelength of 266 nm - 1930 nm. It allows multiple lasers of different wavelengths or just one wavelength and can host different laser technologies such as diode, fiber, DPSS, etc. This laser is ideal for flow cytometry, semiconductor metrology, quantum computing, diagnostics, and genetic applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 808/980/1064/1420 nm Laser for Laser Fault Injection Applications | |
Laser
from ALPhANOV
|
| The PDM+ HP from ALPhANOV is a Laser that operates at a wavelength of 808 nm, 980 nm, 1064 nm, and 1420 nm. It delivers a peak power of up to 3.2 W and has a pulse duration from 5 ns to continuous wave. This single-mode laser has a repetition rate from single-shot to 250 MHz and is ideal to evaluate & analyze integrated circuits & backside laser fault injection (LFI) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Picosecond Nd:YAG Laser for LiDAR Applications | |
Laser
from Teem Photonics
|
| The STP-40K-1x0 from Teem Photonics is a Picosecond Nd:YAG Laser that operates at a wavelength of 1064 nm. It delivers a peak power of greater than 30 kW and pulse width below 0.3 ns & 0.4 ns. This laser has a maximum repetition rate of 500 Hz and is ideal for differential absorption LiDAR, supercontinuum generation, distributed temperature sensing & Raman spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 266 nm DPSS Laser for Lithography & Interferometry Applications | |
Laser
from CryLaS GmbH
|
| The FQCW 266-200 from CryLaS GmbH is a Diode Pumped Solid State Laser that operates at a wavelength of 266 nm. It delivers an output power of 200 mW and has a wavelength stability of ± 1 nm. This continuous wave laser has a maximum power stability of 1% RMS and linewidth of 300 kHz. It has a TEM00 beam spatial mode and is ideal for lithography, Raman spectroscopy & interferometry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 nm THz Photoconductive Antenna for Spectroscopy Applications | |
Photoconductive Antenna
from Thorlabs Inc
|
| The PCA800 from Thorlabs Inc is a Terahertz Photoconductive Antenna that operates at a wavelength of 800 nm. It delivers a THz output power of less than 7 μW and is ideal for applications such as a terahertz emitter or detector in pulsed-laser, gated, broadband THz measurement systems for time-domain spectroscopy, or as a photomixing emitter or detector in tunable THz measurement systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Pyroelectric Detector for Flame Detection Applications | |
Pyroelectric Detector
from InfraTec
|
| The LRM-202 from InfraTec GmbH Infrarotsensorik und Messtechnik is a Pyroelectric Detector that has an aperture size of 3 mm x 2 mm. It has a thermal time constant of 75 ms and electrical time constant of 3 s. This pyroelectric detector uses a lithium tantalate sensing element with a black absorbing layer and has an element size of 1.2 mm x 0.8 mm. It has a minimum voltage responsivity of 560 V/W and is ideal for gas analysis & flame detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Right-Angled Microprisms for Sensing Applications | |
Prism
from IMM Photonics GmbH
|
| The Microprisms from IMM Photonics GmbH are Right-Angled Prisms that have a clear aperture of 80%. They have an angle of tolerance of ± 3 minutes and a dimensional tolerance of ± 0.05 mm (0.5 mm & 0.7 mm). These prisms have a surface quality of 40-20 scratch-dig (s-d) and flatness of 1/2nd of a wavelength (at 632.8 nm). They have an optional aluminium coating and a maximum bevel size of 0.1 mm. These prisms are ideal for sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310 nm - 1550 nm, Fiber Optic Cable for Underground Duct Installation | |
Fiber Optic Cable
from Corning Incorporated
|
| The 002EU4-T4700D20 from Corning Incorporated is a Single-mode (OS2) Fiber Optic Cable that operates at wavelengths of 1310 nm, 1383 nm, or 1550 nm. It has a maximum attenuation of 0.35 dB/km and 0.25 dB/km. This round fiber optic cable features an all-dielectric gel-free loose tube design and is ideal for campus backbone applications such as lashed aerial & underground duct installation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1085 nm Single-Stage Fiber Optic Isolator | |
Fiber Optic Isolator
from Innolume
|
| The OIS1085000PM28DBXXXX from Innolume is a Single-Stage Fiber Optic Isolator that operates at a peak wavelength of 1085 nm. It delivers a maximum optical power of 0.3 W and has an extinction ratio of 23 dB. This fiber optic isolator has an insertion loss of 1.8 dB and a peak isolation of 28 dB. It has a return loss of 55 dB and supports PM980 fibers. This fiber optic isolator is available in a package that measures 55 mm x 5.5 mm x 5.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 380 nm - 800 nm, Microspectrometer for Spectrum Analysis Applications | |
Spectrometer
from World Star Tech
|
| The SPECTROMETER-TS from World Star Tech is a Microspectrometer that operates at a wavelength of 380 nm - 800 nm. It has a center & edge spectral resolution of 1 nm (using 50-micron fiber) and wavelength accuracy of ± 0.3 nm. This spectrometer has a measurement speed of 200 ms and is ideal for full spectrum analysis, chemical analysis, quality control & portable device applications. |
| |
Download Datasheet
Product Details | |
|
