| New Photonics Products this Week |
|
|
|
|
|
|
|
| 450 nm Fiber Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M450±10-100-F100/22-V5W-AP from PhotonTec Berlin is a Fiber Coupled Laser Diode that operates at a wavelength of 450 nm. It delivers an output power of 100 W and has a spectral width (FWHM) of 6 nm. This laser diode has a beam parameter product (BPP) of 10 mm.mrad and slope efficiency of 21.5 W/A. It has an optical fiber with a numerical aperture of 0.22, core diameter of 100 µm, and length of up to 5 m. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 488 nm Blue Diode Laser for Industrial Applications | |
Laser
from Frankfurt Laser Company
|
| The Stradus 488-50 from Frankfurt Laser Company is a Blue Diode Laser Module that operates at a wavelength of 488 nm. It delivers an output power of 50 mW with a power stability of less than 0.5% and has a wavelength accuracy of ± 5 nm. This vertically polarized laser produces a beam of diameter 1.3 mm and has a small beam diameter of 0.8 mm. It is ideal for medical, biomedical, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9.4/10.2/10.6 µm CO2 Lasers for Cutting & Engraving Applications | |
Laser
from Kern Technologies
|
| The KT300 from Kern Technologies are CO2 Lasers that operate at wavelengths of 9.4 µm, 10.2 µm, and 10.6 µm. They deliver an output power of over 300 W and have a power stability of ± 6%. These lasers have a pulse length of less than 2 ms and maximum pulse energy of 600 mJ. They are ideal for wood engraving, plastic processing, steel cutting, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 797 nm Fiber Coupled Laser Diode for Medical Applications | |
Laser Diode
from RPMC Lasers Inc.
|
| The LDX-3415-797-FC from RPMC Lasers Inc. is a Fiber Coupled Laser Diode Chip with a wavelength of 797 nm. It delivers an output power of 4000 mW and has a wavelength accuracy of ± 3 nm. This transverse-electrically (TE) polarized laser diode has a beam divergence of 36 deg (fast axis) & 7 deg (slow axis) and is ideal for medical, industrial & military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 685 nm Red Laser Diode for Photolithography Applications | |
Laser Diode
from World Star Tech
|
| The WLD-100-685 from World Star Tech is a Continuous Wave Red Laser Diode that operates at a wavelength of 685 nm. It delivers an output power of 105 mW and has a differential efficiency of 1.17 mW/mA. This single-mode laser diode has a parallel beam divergence of 9 degrees and is ideal for excitation, bioanalytical, and photolithography & curing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Channel Pyroelectric Detector for Flame Detection Applications | |
Pyroelectric Detector
from InfraTec
|
| The LRM-292 from InfraTec GmbH Infrarotsensorik und Messtechnik is a Multi-Channel Pyroelectric Detector that has a minimum field of view of 60 deg. It has a detectivity of 3 x 108 cm·sqrt(Hz)/W and maximum rms noise density of 45 µV/sqrt(Hz). This lithium tantalate pyroelectric detector operates in current mode and is ideal for gas analysis & flame detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 425 nm - 1050 nm, Borosilicate Hot Mirror | |
Optical Mirror
from IMM Photonics GmbH
|
| The Hot mirrors from IMM Photonics GmbH are Optical Mirrors that operate at a wavelength of 420 nm - 1050 nm. They have a minimum transmission of 85% (425 nm - 700 nm) and reflection of 90% (750 nm - 1050 nm). These dielectric mirrors have a surface quality of 80-50 scratch-dig and surface flatness of 1/2nd of a wavelength (at 633 nm). They have a protective chamber of 0.3 mm x 45 deg and an angle of incidence of 0 deg or 45 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Lithium Iodate Crystal for Second-Harmonic Generation | |
Optical Crystal
from Stanford Advanced Materials
|
| The CY0503 from Stanford Advanced Materials is a Lithium Iodate Crystal with a clear aperture above 90%. It has a flatness of lambda/4 (at 633 nm) and surface quality of 20/10. This optical crystal has a parallelism above 20 arcsec and is ideal for quantum optics, photonic integrated circuits, spectroscopy, second-harmonic generation, material analysis & research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850/1300 nm, Fiber Optic Cable for Duct Installation Applications | |
Fiber Optic Cable
from Corning Incorporated
|
| The 002TU4-T4731D20 from Corning Incorporated is a Fiber Optic Cable with wavelengths of 850 nm or 1300 nm. It has a fiber core diameter of 50 µm and maximum attenuation of 3 dB/km & 1 dB/km. This round fiber optic cable is made from Polyethylene (PE) material and is ideal for campus backbone applications such as lashed aerial & underground duct installation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1260 nm - 1650 nm, Fiber Coupled Polarization Controller | |
Polarization Controller
from MKS | Newport
|
| The F-POL-IL from MKS | Newport is a Fiber Coupled Polarization Controller that operates at a wavelength of 1260 nm - 1650 nm. It has an extinction ratio of 40 dB, return loss above 65 dB, and insertion loss of 0.05 dB. This manual polarization controller uses an all-fiber Babinet-Soleil compensator to generate any output polarization state and supports 250 µm buffered optical fiber. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 nm - 1050 nm, Femtosecond Pulse Compressor for Laser Applications | |
Optical Pulse Compressor
from Thorlabs Inc
|
| The FSPC from Thorlabs Inc is a Optical Pulse Compressor that operates at a wavelength of 700 nm - 1050 nm. It has a pulse width of over 50 fs and pointing stability of less than 100 µrad. This p-polarized pulse compressor has a maximum beam of diameter 2 mm and polarization distortion of 1:200. It has a fiber transmission above 85% and and is ideal for laser applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 nm - 1400 nm, Single-Prism Optical Pulse Compressor | |
Optical Pulse Compressor
from Swamp Optics
|
| The BOA-1300 from Swamp Optics is a Single-Prism Optical Pulse Compressor that operates at a wavelength of 1000 nm - 1400 nm. It delivers a maximum peak power of 500 mW and has a polarization rotation of less than 0.1 deg. This optical pulse compressor produces a collimated beam of diameter of 1 mm - 4 mm and has a beam collinearity below 10 mrad. |
| |
Download Datasheet
Product Details | |
|
|
|
| 485 nm - 1110 nm, Spatial Light Modulators for Quantum Computing | |
Spatial Light Modulator
from Santec Corporation
|
| The SLM-300 from Santec Corporation are Spatial Light Modulators that operate at a wavelength of 485 nm - 1110 nm. They have a resolution of 1920 (H) x 1200 (V) pixels and pixel pitch of 8 µm. These spatial light modulators are ideal for wave-front correction, optical beam shaping for laser processing, biosensing, 3D-printing, IC trimming, and quantum computing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1030 nm - 1060 nm, Optical Amplifier for Life Science Applications | |
Optical Amplifier
from ALPhANOV
|
| The S-FA-HP+ from ALPhANOV is an Optical Amplifier with a wavelength of 1030 nm - 1060 nm. It delivers an output power of 100 mW and has a pulse energy of less than 200 µJ. This continuous wave or pulsed optical amplifier has a gain below 17 dB and slope efficiency of 70%. It has a polarization extinction ratio of over 15 dB and is ideal for laser processing & life science applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 nm - 1100 nm, Laser Power Meters for OEM Applications | |
Laser Power Meter
from Laser Point
|
| The Blink-FR from Laser Point are Laser Power Meters that operate at a wavelength of 250 nm - 1100 nm and 10.6 µm. They deliver an output power of up to 100 W and have a power density of 1.5 kW/cm2. These laser power meters have a response time of 90 ms and an active area of 16 mm x 16 mm. They have an energy of 20 mJ - 10 J and are ideal for OEM & laboratory applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2K SWIR Line-Scan Array Camera for Semiconductor Inspection Applications | |
Scientific & Industrial Camera
from New Imaging Technologies
|
| The LiSaSWIR 2048 from New Imaging Technologies is a 2K SWIR Line-Scan Array Camera that has a resolution of 2048 x 1 pixels. It has a spectral response of 0.9 µm - 1.7 µm and pixel pitch of 8 µm x 8 µm. This InGaAs camera is ideal for applications such as semiconductor & solar cell inspection, food sorting, waste sorting, and hot glass inspection. |
| |
Download Datasheet
Product Details | |
|