| Featured Products this Week |
|
|
| 635 nm Red Line Laser for Laboratory Applications | |
Laser
from IMM Photonics GmbH
|
| The IMM1618-635-1-L from IMM Photonics GmbH is a Red Line Laser that operates at a wavelength of 635 nm. It delivers an output power of 0.95 mW and has a beam divergence of 0.4 mrad. This single homogeneous laser produces a beam of diameter 0.7 mm x 80 mm. It uses plastic or glass optics and operates in both CW and modulated modes. This laser is ideal for measuring instruments, pointing, alignment lasers, laboratory instruments, and sensor applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1534 nm DPSS Lasers for LiDAR & Instrumentation Applications | |
Laser
from RPMC Lasers Inc.
|
| The KAUKAS SERIES from RPMC Lasers Inc. are DPSS Lasers that operate at a wavelength of 1534 nm. They have a pulse width of less than 11 ns and pulse energy of up to 3 mJ. These nanosecond pulsed lasers have a TEM00 spatial mode and repetition rate from a single shot to 2 Hz. They are ideal for LiDAR, laser ranging, LIBS, metrology, and instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1540 nm - 1560 nm, Pulsed Fiber Laser for LiDAR Applications | |
Laser
from BKtel Photonics
|
| The HFL from BKtel Photonics is a Pulsed Fiber Laser that operates at a wavelength of 1540 nm - 1560 nm. It delivers an output power of up to 4 W and has a pulse width of 0.4 ns - 50 ns. This randomly or linearly polarized laser has a pulse energy of 50 μJ and repetition rate of 10 kHz - 2000 kHz. It is ideal for test & measurement, distance measurement, and LiDAR/3D scanning applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 940 nm Continuous Wave Laser Diode | |
Laser Diode
from Sheaumann Laser
|
| The T-Series-M9-MM-940nm-100um-1.W from Sheaumann Laser is a Continuous Wave (CW) Laser Diode that operates at a wavelength of 940 nm. It delivers an output power of 1.5 W and has a slope efficiency of 1 W/A. This multimode laser diode has a beam divergence of 30 degrees (vertical far-field) and 9 degrees (horizontal far-field) at FWHM. It requires a threshold current of 300 mA, DC supply voltage of 1.7 V, and consumes 1.8 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 Megapixel CMOS Image Sensor for Machine Vision Applications | |
CMOS Image Sensor
from Gpixel Microelectronics Inc.
|
| The GMAX3405 from Gpixel Microelectronics Inc. are 5 Megapixel CMOS Image Sensors that have a resolution of 2448 (H) x 2048 (V) pixels. They have a charge domain electronic global shutter in a 2/3" optical format that deliver a maximum frame rate of 264 fps. These CMOS image sensors are ideal for machine vision, logistics barcode readers, and intelligent traffic system (ITS) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 185 nm - 900 nm, Photomultiplier for Low Light Measurements | |
Photomultiplier
from MKS | Newport
|
| The 77341 from MKS | Newport is a Photomultiplier that operates at a wavelength of 185 nm - 900 nm. It has a peak responsivity of 74 mA/W and peak wavelength of 400 nm. This photomultiplier has a current amplification of 1 x 107 and an active area of 8 mm x 24 mm. It has a rise time of 2.2 ns and transit time of 22 ns. This photomultiplier is ideal for low-light measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 640 nm - 1100 nm, Spatial Light Modulator for Holography Applications | |
Spatial Light Modulator
from Thorlabs Inc
|
| The EXULUS-HD3HP from Thorlabs Inc is a Liquid Crystal on Silicon (LCoS) Spatial Light Modulator that operates at a wavelength of 640 nm - 1100 nm. It has a display panel resolution of 1920 x 1200 pixels and an active area of 15.42 mm x 9.66 mm. This reflective spatial light modulator is ideal for beam manipulation applications including optical trapping, beam steering, and shaping. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Article | | What is a Prism? | | An optical prism, is a piece of glass or other transparent material cut with flat, polished surfaces, useful for reflecting light. At least one surface must be angled - elements with two parallel surfaces are not prisms. The most familiar type of optical prism is the triangular prism, which has a triangular base and rectangular sides. Click here to read the full article. | | | |
|
|
| 1050 nm Spatial Light Modulator for Laser Marking Applications | |
Spatial Light Modulator
from Hamamatsu Photonics
|
| The X15213-03CL from Hamamatsu Photonics is a Spatial Light Modulator that operates at a wavelength of 1050 nm. It has a wavelength accuracy of ± 50 nm and light utilization efficiency of 97%. This spatial light modulator is ideal for optical beam pattern shaping, laser processing, laser marking, optical manipulation, optical tweezers, pulse shaping, and metal 3D printing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 535 nm - 820 nm, Fabry-Perot Interferometer for Laser Spectral Analysis | |
Interferometer
from LD-PD Inc
|
| The SFPI-500A(DP) from LD-PD Inc is a Fabry-Pérot Interferometer that has a spectral response of 535 nm - 820 nm. It has a free spectrum range of 1.5 GHz and resolution of less than 7.5 MHz. This scanning interferometer has a confocal Fabry-Perot optical cavity with a length of 50 mm. It is ideal for applications such as examining the fine structure of the spectral characteristics of continuous-wave lasers. |
| |
Download Datasheet
Product Details | |
|
