| New Photonics Products this Week |
|
|
|
|
|
|
|
| 808 nm Fabry-Perot Laser Diode for Optical Tweezer Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The EYP-RWL Series from TOPTICA EAGLEYARD is a Fabry-Perot Laser Diode with a wavelength of 808 nm. It delivers an output power of 400 mW - 450 mW and has a spectral width (FWHM) of 1 nm. This single mode laser diode has a polarization extinction ratio of 18 dB and temperature coefficient of wavelength of 0.28 nm/K. It is ideal for pumping and optical tweezer applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 520 nm Fiber Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M520±10-4-F105/22-C1S-P from PhotonTec Berlin is a Fiber Coupled Laser Diode that operates at a wavelength of 520 nm. It delivers an output power of 3.5 W and has a maximum spectral width (FWHM) of 10 nm. This laser diode has a slope efficiency of 3 W/mA & 5 3 W/mA and power conversion efficiency of 5% & 17%. It requires a threshold current of 0.2 A, DC supply voltage of 2 V & 17 V, and consumes 1.5 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 639.6 nm CW Diode Pumped Laser for Microscopy Applications | |
Laser
from HÜBNER Photonics
|
| The Cobolt Bolero from HÜBNER Photonics is a Continuous Wave Diode Pumped Laser that operates at a wavelength of 639.6 nm. It has a wavelength accuracy of ± 0.3 nm and delivers an output power of 300 mW (without isolator) & 500 mW (with integrated isolator). This laser is ideal for Raman spectroscopy, interferometry, super-resolution microscopy, and optical trapping applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1030 nm Laser Gain Module for Pulsed Laser Systems | |
Laser Gain Module
from NKT Photonics
|
| The aeroGAIN-ROD 3.1 from NKT Photonics is a Laser Gain Module that operates at a center wavelength 1030 nm. It has an optical efficiency above 60% and beam quality (M2) of up to 1.2. This laser gain module has a polarization extinction ratio (PER) of over 15 dB and signal average power below 250 W. It has a signal core diameter of 85 μm and is ideal for ultrafast pulsed lasers and laboratory applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 976 nm Laser Gain Module for Frequency Conversion Applications | |
Laser Gain Module
from INO
|
| The LaserNGN-56 from INO is a Laser Gain Module that operates at a wavelength of 976 nm (pumping). It delivers an output power of 100 W and has a peak power class of 500 kW. This laser gain module has a gain of 30 dB (at 1064 nm) and gain bandwidth of 1020 nm - 1080 nm. It has a slope efficiency of 70% and is ideal for ultrafast fiber laser & frequency conversion applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Shack-Hartmann Wavefront Sensor for Microscopy Applications | |
Wavefront Sensor
from Optocraft
|
| The SHSCam HR3-130-GE from Optocraft is a Shack-Hartmann Wavefront Sensor that has a spectral range of 355 nm - 1064 nm. It has a lateral resolution of 27 x 37 spots - 251 x 331 spots and an evaluation rate of 14 Hz. This wavefront sensor is ideal for automotive, telecommunication, wavefront-based alignment of laser systems, monitoring of laser machines, and space applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 880 nm Phototransistor for Sensing Applications | |
Phototransistor
from Optrans America
|
| The PT086N4 from Optrans America is a Phototransistor that has a peak sensitivity wavelength of 880 nm. It has a spectral range of 400 nm - 1100 nm and switching time (rise/fall) of 10 μs. This transistor has a collector-emitter current of 3 mA, C-E saturation voltage of 0.2 V, and collector dark current of up to 100 nA. It is available in a TO-18 metal package and is ideal for optical switches, smoke detectors & edge sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.1 THz - 30 THz, Terahertz Detector for Power Measurements | |
Terahertz Detector
from Gentec-EO
|
| The THZ12D-3S-VP-D0 from Gentec-EO is a Terahertz Detector with a frequency of 0.1 THz - 30 THz. It delivers a maximum average power of 3 W and has an average power density of 30 W/cm2. This terahertz detector has a maximum energy density of 1 J/cm2 and minimum repetition rate of 7 Hz (with anticipation) & 1 Hz (without anticipation). It is ideal for power measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 790 nm - 990 nm, Slow Axis Collimator Lens for LiDAR Applications | |
Optical Lens
from FISBA
|
| The SACA 1000 from FISBA is a Slow Axis Collimator Optical Lens that operates at a wavelength of 790 nm - 990 nm. It has an effective focal length of 8 mm and a back focal length of 7.5 mm (at 940 nm). This multi-emiiter array optical lens has 5 emitters and is available in a package that measures 1.4 mm x 1 mm x 5.8 mm. It is ideal for diode laser systems, fiber laser pumps, and LiDAR systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pulse Picker for Burst Generation Applications | |
Pulse Picker
from LaCoSys
|
| The X-SERIES from LaCoSys is a Pulse Picker with a maximum pulse output frequency of up to 100 MHz. It has a pulse input frequency up to 200 MHz and an output rise time/fall time of less than 1.5 ns. This pulse picker has a pulse width of 3 ns, 8 ns & 14 ns and resolution of 0.01 ns. It has a delay range of 3 ns - 14 ns and is ideal for pulse picking in ultra-short-pulse laser systems and burst generation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5.1 Megapixel CMOS Camera for Industrial Applications | |
Scientific & Industrial Camera
from RESTAR FRAMOS Technologies (SONY)
|
| The XCL-SG510C from RESTAR FRAMOS Technologies (SONY) is a 5.1 Megapixel CMOS Camera that has a resolution of 2464 (H) x 2056 (V) pixels. It has a pixel size of 3.45 µm x 3.45 µm and sensitivity of 2000 lx. This camera is ideal for ITS (Intelligent Transportation System), factory automation, food & beverage inspection, and pharmaceutical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 638 nm Raman Spectrometer for OEM & Research Applications | |
Spectrometer
from Wasatch Photonics
|
| The WP 638X from Wasatch Photonics is a Raman Spectrometer with a wavelength of 638 nm. It is available in two detector options: TEC-regulated (R) and TEC-cooled (C). This spectrometer has a spectral range of 270 cm-1 - 3500 cm-1 (C) and 270 cm-1 - 3800 cm-1 (R). It has a minimum integration time of 8 ms and is ideal for Raman spectroscopy, research & OEM applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 m/z - 3000 m/z, Mass Spectrometer for Laboratory Applications | |
Spectrometer
from Thermo Fisher Scientific
|
| The Orbitrap Exploris 120 from Thermo Fisher Scientific is a Mass Spectrometer that has a mass range of 40 m/z - 3000 m/z. It has a mass analyzer resolution of up to 120000 (at 200 m/z) and scan rate below 22 Hz (at resolution setting at 15,000). This spectrometer has a sensitivity of 200 fg and signal-to-noise ratio of 100:1 or 250:1. It is ideal for laboratory applications. |
| |
Download Datasheet
Product Details | |
|
