Latest Photonics News & White Papers. View it in your browser
| | | Weekly Edition | | | Date: 09 March 2026 | | | |
| Sponsored by Deutsche Messe AG | | |
| Latest Photonics News this Week |
|
|
| New White Papers & Articles |
|
|
| Featured Products this Week | |
|
| 655 nm Red Line Laser for Laboratory Applications | |
Laser
from IMM Photonics GmbH
|
| The IMM1255-655-50-L-Y from IMM Photonics GmbH is a Red Line Laser that operates at a wavelength of 655 nm. It delivers an output power of 50 mW and has a beam divergence of 0.6 mrad. This single homogeneous laser produces a beam of diameter 0.7 mm x 100 mm and has an optional modulation of up to 25 kHz. It uses plastic or glass optics and is ideal for measuring instruments, pointing, alignment lasers, laboratory instruments & sensor applications. |
| |
Download Datasheet
Product Details | |
| | |
| 2940 nm Diode-Pumped Solid-State Laser for Medical & Industrial Applications | |
Laser
from Pantec Biosolutions AG
|
| The DPM-2 (Er:YAG) from Pantec Biosolutions AG is a DPSS Laser that operates at a wavelength of 2940 nm. It delivers an output power of 1.2 W or 2 W and has a pulse energy of 13 mJ or 20 mJ. This pulsed laser has a repetition rate of up to 1 kHz and is ideal for medical applications such as aesthetics, dermatology, ENT, lithotripsy, minimally-invasive surgery, orthopedics & industrial applications. |
| |
Download Datasheet
Product Details | |
| | |
| 3.2 Megapixel CMOS Image Sensor for Embedded Vision System Applications | |
CMOS Image Sensor
from RESTAR FRAMOS Technologies (SONY)
|
| The IMX900-AQR from Sony is a 3.2 MP CMOS Image Sensor that has an effective resolution of 2064 (H) x 1552 (V) pixels. It has a global shutter in a 1/3.1" optical format that deliver frame rates of 125.1 fps (8-bit), 117 fps (10-bit), and 72 fps (12-bit). This image sensor is ideal for factory automation (FA) cameras, code reading cameras, and embedded vision system applications. |
| |
Download Datasheet
Product Details | |
| | |
| 4K Line Scan CMOS Image Sensor for Inspection Applications | |
CMOS Image Sensor
from Gpixel Microelectronics Inc.
|
| The GL7004 from Gpixel Microelectronics Inc. is a 4K Line Scan CMOS Image Sensor that has a resolution of 4096 (H) x 4 (V) pixels. It has a global shutter in a 1.8" optical format that has a data rate of less than 14.4 Gbps. This CMOS image sensor has a pixel size of 7 µm x 7 µm and photo-sensitive area of 28.67 mm x 49 µm. It is ideal for logistics, positioning, automation, and inspection applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | | |
|
| | |
| Fiber Optic Transceiver for ADAS & Automotive Applications | |
Fiber Optic Transceiver
from KDPOF
|
| The KD9351 from KDPOF is a Fiber Optic Transceiver (FOT) that operates in two modes: 100 Mb/s mode and 1 Gb/s mode. It has a bit error rate of less than 10-12 and an extinction ratio (ER) of 15 dB (for link budget maximization). This FOT is ideal for communications in vehicle data networks, interconnection of infotainment, ADAS Electronic Control Units (ECUs), and automotive applications. |
| |
Download Datasheet
Product Details | |
| | |
| 1535 nm - 1565 nm, Optical Amplifier for LiDAR Applications | |
Optical Amplifier
from BKtel Photonics
|
| The UHPOA-1.5 from BKtel Photonics is an Optical Amplifier that operates at a wavelength of 1535 nm - 1565 nm. It delivers an output power of up to 40 dBm and has a power stability of 2%. This optical amplifier has an input power range from -8 dBm to 15 dBm and a noise figure of 5.5 dB. It is ideal for test & measurement, LiDAR, CATV, and video overlay applications. |
| |
Download Datasheet
Product Details | |
| |
| Sponsored by Deutsche Messe AG | | |
| |
| Optical Design Software for Light Ray Visualization Applications | |
Optical Design Software
from Lambda Research Corporation
|
| The RayViz for Solidworks from Lambda Research Corporation is an Optical Software that facilitates the visualization of light rays and ray paths. It is an add-in tool that allows users to apply and save optical properties directly to the SOLIDWORKS model via the TracePro System Tree within SOLIDWORKS. This software is used for mechanical design and modifying optical material properties. |
| |
Download Datasheet
Product Details | |
| | |
| 0.44 µm - 10.6 µm, Optical Power Meter for Research Applications | |
Laser Power Meter
from MKS | Ophir
|
| The Ariel from MKS | Ophir are Optical Power Meters that operate at a wavelength of 0.44 µm - 10.6 µm. They have a power range of 200 mW - 8000 mW and an exposure time of 0.05 s - 2 s (pulsed mode) & 10 s (CW mode). These optical power meters have an Laser Protection Level 2 absorber and are ideal for additive manufacturing chambers & production process quality control applications. |
| |
Download Datasheet
Product Details | |
|
| | About GoPhotonics | | GoPhotonics keeps you up to date with the Photonics Industry with New Products, News, Upcoming Events and more. We have the largest searchable database of Photonics products that consist of Lasers, CMOS Image Sensors, Optical Components and Test & Measurement Equipment. Would you like to Unsubscribe? If so, click here. |
|
| To unsubscribe please click here | {{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}} |
|
