Latest Photonics Products. View it in your browser
| | | Weekly Edition | | | Date: 26 March 2026 | | | |
| Sponsored by PCB Directory | | |
| New Photonics Products this Week | |
|
| 760.9 nm DFB Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 760.9 nm. It delivers an output power of 12 mW and has a linewidth (FWHM) of 2 MHz. This laser diode has a monitor detector responsivity of 2 μA/mW - 800 μA/mW and is ideal for spectroscopy, metrology & oxygen detection applications. |
| |
Download Datasheet
Product Details | |
| | |
| 925 nm - 1170 nm, UV Fused Silica Spherical Mirror | |
Optical Mirror
from OPTOMAN
|
| The PCV-R500-UVFS-50.8-ET9.52-UBBHR38 from OPTOMAN is a Spherical Mirror that operates at a wavelength of 925 nm - 1170 nm. It has a diameter of 50.8 mm, thickness of 9.52 mm (edge) & 8.87 mm (center), and chip size of less than 0.2 mm. This laser mirror has a minimum clear aperture of 41 mm and surface quality of 20-10 S-D (scratch-dig). It has a radius of curvature -500 mm (concave surface (S1)) and infinity (planar surface (S2)). |
| |
Download Datasheet
Product Details | |
| | |
| 444 nm Blue Laser for Metal Printing Applications | |
Laser
from NUBURU
|
| The BL-250 from NUBURU is a Blue Laser that operates at a wavelength of 444 nm. It delivers an output power of 250 W with a power stability of ± 1.5% and has a bandwidth of ± 15 nm. This laser has a beam parameter product of less than 5 mm.mrad and collimator aperture diameter of 20 mm or 30 mm. It is ideal for batteries, consumer electronics, interconnects, electronics packaging, and powder bed fusion 3D metal printing applications. |
| |
Download Datasheet
Product Details | |
| | |
| 808 nm Fiber-Coupled Laser Diode for Interferometry Applications | |
Laser Diode
from Innovative Photonic Solutions
|
| The I0808MB0600MX from Innovative Photonic Solutions is a Fiber-Coupled Laser Diode that operates at a wavelength of 808 nm. It delivers an output power of 600 mW and has a wavelength tolerance of ± 0.5 nm. This laser diode is ideal for high-resolution Raman spectroscopy, fiber laser pumping, metrology, interferometry, and remote sensing applications. |
| |
Download Datasheet
Product Details | |
| | |
| 5.32 Megapixel SWIR Sensors for Material Sorting Applications | |
SWIR Sensor
from RESTAR FRAMOS Technologies (SONY)
|
| The IMX992 from Sony Semiconductor Solutions Corporation are 5.32 MP SWIR Sensors with an effective pixel of 2592 (H) x 2056 (V) pixels. They have a global shutter in a 1/1.4" optical format that delivers frame rates of 131 fps (8-bit ADC), 120 fps (10-bit ADC), and 70 fps (12-bit ADC). These SWIR sensors are ideal for sorting materials and transmission observation applications. |
| |
Download Datasheet
Product Details | |
| | |
| 750 nm - 770 nm, AlGaInP LED for Automobile Applications | |
LED
from Marubeni
|
| The SMBB760D-2100S-I from Marubeni is an AlGaInP LED that operates at a wavelength of 750 nm - 770 nm. It delivers a power of 800 mW & 2000 mW (radiated) and has a half-width of 25 nm. This LED has a rise time of 50 ns and fall time of 100 ns. It is ideal for medical devices, safety devices, automobiles, traffic control systems, and nuclear reactor control system applications. |
| |
Download Datasheet
Product Details | |
| | |
| 9 kHz - 14 GHz, Photodetector for Test & Measurement Applications | |
Photodetector
from Skyastar Technologies
|
| The DA06 from Skyastar Technologies is a Photodetector that has a frequency bandwidth of 9 kHz - 14 GHz. It has a responsivity of 0.95 mA/mW (1310 nm) & 1 mA/mW (1550 nm) and conversion gain of -2500 V/W. This photodetector is ideal for antenna remoting, satellite communications, wireless signal transport, distributed antenna system, and test & measurement applications. |
| |
Download Datasheet
Product Details | |
| | |
| 370 nm - 1620 nm, BK7 Optical Window for Lens Protection Applications | |
Optical Window
from Albrighter Technology Co.,Ltd.
|
| The AW01-020-020 from Albrighter Technology is a BK7 Optical Window that operates at a wavelength of 370 nm - 1620 nm. It has a thickness of 3 mm and thickness tolerance of ± 0.1 mm. This window has a surface quality of 40/20 - 60/40 S-D and flatness of 1/4th of a wavelength (at 633 nm). It is ideal for use in electronic sensors, optical lenses & laser processing head protection applications. |
| |
Download Datasheet
Product Details | |
| | |
| 1310/1550 nm Polarization Modulator for Sensing Applications | |
Polarization Modulator
from EEOptics
|
| The PRM-1-2 from EEOptics is a Polarization Modulator that operates at a wavelength of 1310 nm and 1550 nm. It has a response time of less than 10 μs and modulation rate from DC to 130 kHz. This polarization modulator is ideal for polarization switching, polarization scrambler, variable digital group delay, polarization management, interferometers, and sensing system applications. |
| |
Download Datasheet
Product Details | |
| | |
| Polarization Modulator for 3D Visualization Applications | |
Polarization Modulator
from DepthQ
|
| The DepthQ 3D Polarization Modulator from DepthQ is a Polarization Modulator that has an efficiency of 15%. It has a switching time of 50 μsec and operating speeds of 120 fps, 144 fps, 192 fps, 240 fps & 400 fps. This polarization modulator has a large aperture size of 17.15 cm x 9.78 cm and small aperture size of 9.84 cm x 6.11 cm. It is ideal for advanced 3D visualization applications. |
| |
Download Datasheet
Product Details | |
| | |
| |
| 1064 nm RTP Electro-Optic Q-Switch for Phase Modulation Applications | |
Electro-Optic Q-Switch
from Sintec Optronics
|
| The SRC-Y-030-10-20-1064 from Sintec Optronics is a Rubidium Titanyl Phosphate (RTP) Electro-Optic Q-Switch that operates at a wavelength of 1064 nm. It has a transmission above 98.5% and half wave voltage of 0.99 kV. This EOQS has a contrast ratio of greater than 20 dB and is ideal for Q-switches, amplitude, phase modulation & pulse picker applications. |
| |
Download Datasheet
Product Details | |
| | |
| 1 µm - 1.5 µm, Electro-Optic Deflector for Laser Marking Applications | |
Electro-Optic Deflector
from NTT Advanced Technology Corporation
|
| The 2D KTN optical deflector from NTT Advanced Technology Corporation is an Electro-Optic Deflector with wavelengths of 1 μm - 1.5 μm. It has a deflection angle of 120 x 96 mrad and driving frequency of 10 kHz - 100 kHz. This electro-optic deflector is ideal for OCT, endoscope, precision surveying system, laser microscope, laser processing, laser marking, and optical switch applications. |
| |
Download Datasheet
Product Details | |
| | |
| 343 nm - 2000 nm, Optical Pulse Compressor for Micromachining Applications | |
Optical Pulse Compressor
from Glophotonics
|
| The FastLas from Glophotonics is an Optical Pulse Compressor that operates at a wavelength of 343 nm - 1800 nm & 343 nm - 2000 nm (compressed output). It delivers an average power of 0.07 W - 118 W and has a compression ratio of 2.8 - 27. This optical pulse compressor is ideal for micromachining, surgery & biomedical systems, extreme light, and attoscience research applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | | |
|
| | |
| Optical Waveguide Mode Solver for Waveguide Analysis | |
Optical Design Software
from Photon Design
|
| The FIMMWAVE from Photon Design Ltd is an Optical Waveguide Mode Solver used to analyze electromagnetic modes in complex 2D+Z optical waveguide structures. It supports a large number of complementary algorithms that allow it to solve a wide variety of waveguides. This software includes flexible design tools with editors for creating rectangular and geometrical waveguide structures. |
| |
Download Datasheet
Product Details | |
| | |
| Photonic Design and Simulation Software for PIC Optimization | |
Optical Design Software
from ANSYS
|
| The Ansys Lumerical from Ansys is a Photonic Design & Simulation Software used for the modeling, analysis, and optimization of nanophotonic devices & photonic integrated circuits. It includes a comprehensive set of tools such as Ansys Lumerical FDTD, Ansys Lumerical MODE, Ansys Lumerical DEVICE, Ansys Lumerical INTERCONNECT, and Ansys Lumerical Multiphysics. |
| |
Download Datasheet
Product Details | |
| | |
| Optical Design Software for Non-imaging Optical Systems | |
Optical Design Software
from LTI Optics
|
| The Photopia (LTI) from LTI Optics is an Optical Design Software that facilitates the design and analysis of non-imaging optical systems directly inside a CAD model. It is a fast and accurate optical design program that produces comprehensive performance evaluations for luminaire optical design, illumination optical design, UV curing, and disinfection systems, daylighting design. |
| |
Download Datasheet
Product Details | |
| | |
| Optical Design Software for Lens Analysis | |
Optical Design Software
from Sky Scientific
|
| The dbOptic from Sky Scientific is an Optical Design Software for lens design and analysis on personal computers. It supports the creation and analysis of optical systems with up to 99 surfaces. This software allows designs using multiple surface types including spherical, flats, and iris stops. It incorporates a fully integrated glass catalog, a basic library of lenses & mirrors, photographic and telescope systems, with an additional library of manufacturer's stock lens designs. |
| |
Download Datasheet
Product Details | |
| | |
| Optical Waveguide Design and Modal Analysis Software | |
Optical Design Software
from Optiwave Systems
|
| The OptiMode from Optiwave Systems Inc. is an Optical Waveguide Design and Modal Analysis Software for the design and modal analysis of optical waveguide structures. It features advanced numerical solvers for accurate waveguide analysis, including Alternating Direction Implicit, Finite Difference (FD Complex), Finite Element, anisotropic waveguide solvers, and fiber solvers. |
| |
Download Datasheet
Product Details | |
|
| Featured Article | | What is Pockels Effect? | | Pockels Effect is the linear electro-optic effect in which the refractive index of the medium is modified with respect to an applied electric signal or voltage. This effect was discovered by the German physicist Friedrich Pockels in 1893. It occurs only in non-centrosymmetric crystals, i.e., crystals with inversion symmetry. Click here to read the full article. | | | |
| | About GoPhotonics | | GoPhotonics keeps you up to date with the Photonics Industry with New Products, News, Upcoming Events and more. We have the largest searchable database of Photonics products that consist of Lasers, CMOS Image Sensors, Optical Components and Test & Measurement Equipment. Would you like to Unsubscribe? If so, click here. |
|
| To unsubscribe please click here | {{Sender_Name}} {{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}} |
|