| New Photonics Products this Week |
|
|
| Picosecond Laser for Material Processing Applications | |
Laser
from neoLASE
|
| The neoMOS 70ps from neoLASE is a Picosecond Laser that has a pulse duration of 70 ps. It delivers an average power of 15 W and has a repetition rate from single shot to 80 MHz. This laser has a pulse energy of 250 µJ (at 1064 nm) and beam quality factor (M²) below 1.3. It has a power noise of less than 1% (RMS) and is ideal for photovoltaic & electronics production, display glass processing, security, decorative marking & material processing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 520 nm Green Diode Laser for Inspection Applications | |
Laser
from The Optoelectronics Company Ltd
|
| The 500-052001 from The Optoelectronics Company Ltd is a Green Diode Laser Module that operates at a wavelength of 520 nm. It delivers an output power of 5 mW and has a power stability below 5%. This laser has a pointing stability of less than 0.2 mrad/°C and bore sighting of up to 2 degrees. It produces a beam of diameter 4 mm x 2 mm and is ideal for sensing & positioning, alignment & inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 248 nm Krypton Fluoride Excimer Laser for Industrial Applications | |
Laser
from Gigaphoton
|
| The G21K from Gigaphoton is a Krypton Fluoride (KrF) Excimer Laser that operates at a wavelength of 248 nm. It delivers an average output power of 20 W and has a pulse energy of 10 mJ. This laser has a repetition rate of 2000 Hz and bandwidth (FWHM) of 0.5 pm & 1.4 pm (E95). It has a exposure of 0.13 µm and energy dose stability of 0.35%. This laser is ideal for industrial and manufacturing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 800 nm - 2600 nm, InGaAs PIN Photodiode for LiDAR Applications | |
Photodiode
from Marktech Optoelectronics
|
| The MTSM2601SMF2-150 from Marktech Optoelectronics is an InGaAs PIN Photodiode that operates at a wavelength of 800 nm - 2600 nm. It has an active area of 1.5 mm, responsivity of 1.24 A/W, and quantum efficiency of 72%. This photodiode is ideal for high-speed optical communication, industrial control, gas/water analysis, LiDAR, and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Near Eye Lens for AR/VR Production Line Testing Applications | |
Optical Lens
from Wavelength Opto-Electronic
|
| The DJZ32-B01 from Wavelength Opto-Electronic is a Near Eye Optical Lens that has a field of view of 48.8° (H) x 41.3° (V). It has a front focal length of 10.03 and features a multi-element optical design. This lens is ideal for applications including automatic inspection of MTF, field of view, and relative illumination in assembly, and quality inspection systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm Acousto-Optic Modulator for Q-Switched Lasers | |
Acousto-Optic Modulator
from BeamQ Lasers
|
| The Fiber-Coupled 100MHz AOM from BeamQ Lasers is an Acoustic-Optic Modulator that operates at a wavelength of 1064 nm. It delivers an optical output power of 5 W and has a wavelength accuracy of ± 5 nm. This AOM has a driving power of 2 W and peak output power of 10 kW. It has an isolation loss of 50 dB and is used in Q-switched lasers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| SiGe BiCMOS Transimpedance Amplifier for SONET Applications | |
Transimpedance Amplifier
from Semtech
|
| The GN1055 from Semtech is a Silicon Germanium (SiGe) BiCMOS Transimpedance Amplifier that has a data rate of 11.3 Gbps. It has a transimpedance of 4 kOhms and bandwidth of 12 GHz. This transimpedance amplifier is ideal for SONET/SDH-based transmission systems, 10 gigabit Ethernet, test equipment & modules, and fibre channel applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1590 nm Fiber Optic Circulator for Sensing Applications | |
Fiber Optic Circulator
from Kohoku Kogyo
|
| The YC-1100-159 from Kohoku Kogyo is a Fiber Optic Circulator with a central wavelength of 1590 nm. It has a maximum insertion loss of 0.7 dB, 0.9 dB & 0.1 dB (polarization dependency) and an isolation of greater than 50 dB & 38 dB. This fiber optic circulator has a directivity and return loss above 50 dB and is ideal for optical communication and sensing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1530 nm - 1565 nm, Erbium-doped Fiber Amplifier for DWDM Metro Networks | |
Optical Amplifier
from Calmar Laser
|
| The AMP-PM18 from Calmar Laser is an Erbium-doped Fiber Amplifier with a wavelength of 1530 nm - 1565 nm. It delivers output power of 18 dBm and has a small signal gain of 30 dB. This amplifier is ideal for seed laser amplification, C-band channel boost amplification, narrow band amplification in access or CATV networks, DWDM metro network, short pulse amplification applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 deg - 120 deg, Videoscope for Visual Inspection Applications | |
Borescope
from Olympus Corporation
|
| The IV9435GL from Olympus Corporation is a Videoscope with a resolution of 768 (H) x 576 (V) pixels. It has a field of view of 80 deg - 120 deg and magnification of 5x. This borescope has an articulation angle of 130 deg, frame rate of 30 fps - 60 fps, and field depth from 2 mm to infinity. It has an insertion cable length of 3.5 m and is ideal for visual inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Videoscope for Long Range Inspection Applications | |
Borescope
from Lenox Instrument
|
| The 7E053VL-15080 from Lenox Instrument is a Videoscope that has a field of view of 80 degrees. It has an outer diameter of 5.3 mm and a working length of 4.9'. This borescope features a flexible long-range videoscope design and has an umbilical cable with a length of 2 m. It is equipped with a 7-inch color LCD monitor and uses CCD video chip technology. This borescope is ideal for long-range inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 633 nm Fizeau Interferometer for Measurement Applications | |
Interferometer
from XONOX Technology GmbH
|
| The X-fiz 100 ST from XONOX Technology GmbH is a Fizeau Interferometer with a wavelength of 633 nm. It has a 4-inch Fizeau aperture and an X fringe ST static fringe analyzing system. This interferometer features a low-distortion imaging system with motorized pupil plane focus control and has an optical axis height of 131 mm. It is ideal for measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 nm - 4200 nm, Interferometer for Raman Spectroscopy Applications | |
Interferometer
from NIREOS SRL
|
| The GEMINI from NIREOS SRL is an Interferometer that has a spectral range of 250 nm - 4200 nm. It has a maximum optical delay from -100 fs to 2000 fs and delay stability of less than 1 x 10-18 s. This interferometer is ideal for time- and frequency-resolved fluorescence, coherent Raman spectroscopy, single-molecule studies, and two-dimensional spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 380 nm - 1100 nm, Spectrophotometer for Pharmaceutical Applications | |
Spectrometer
from SOL Instruments
|
| The MC 124-1 from SOL Instruments is a Spectrophotometer with a spectral range of 380 nm - 1100 nm. It has a spectral slit width of 1 nm, transmittance from from 0.01% to 200%, and an absorbance from -0.3 B to 4 B. This spectrophotometer is ideal for pharmaceutical manufacturing, environmental laboratories, petrochemical industry, and chemical industry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 nm - 4500 nm, FTIR Spectrometer for Absorption Applications | |
Spectrometer
from NIREOS SRL
|
| The TRICLOPS from NIREOS SRL is a Fourier Transform Infrared (FTIR) Spectrometer that operates at a wavelength of 400 nm - 4500 nm. It has a spectral resolution of 10 cm-1 and spectra collection rate of 0.5 Hz - 2 Hz. This spectrometer is ideal for monitoring emission of light sources, materials characterization, and optical coating characterization applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
