| New Photonics Products this Week |
|
|
| 760.9 nm DFB Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency DFB Laser Diode that operates at a center wavelength of 760.9 nm. It delivers an output power of 12 mW and has a linewidth (FWHM) of 2 MHz. This continuous wave laser diode has a monitor detector responsivity of 2 μA/mW - 800 μA/mW and is ideal for spectroscopy & metrology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1534 nm DPSS Laser for LiDAR & Metrology Applications | |
Laser
from RPMC Lasers Inc.
|
| The KAUKAS 2_LAB OEM from RPMC Lasers Inc. is a Diode Pumped Solid State (DPSS) Laser that operates at a wavelength of 1534 nm. It delivers an average output power of 2 mW and has a wavelength tolerance of ± 1 nm. This nanosecond laser has a pulse duration of less than 15 ns and is ideal for LiDAR, laser ranging, LIBS, metrology & instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1040 nm - 1080 nm, Laser Diode for Material Processing Applications | |
Laser Diode
from Monocrom
|
| The A-Stack &lambda1040-1080 nm from Monocrom is a Laser Diode that operates at a wavelength of 1040 nm - 1080 nm. It delivers an output power of up to 100 W (CW) & 350 W (QCW) and has a wavelength tolerance of ± 5 nm. This actively cooled laser diode has a spectral width of less than 5 nm and is ideal for aesthetics, odontology, material processing, and defense applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1045 nm - 1060 nm, Superluminescent Diode for Spectroscopy Applications | |
Superluminescent Diode
from QPhotonics
|
| The QSDMI-1050-35 from QPhotonics is a Superluminescent Diode that operates at a center wavelength of 1045 nm - 1060 nm. It delivers an optical power of 25 mW - 35 mW and has a spectral bandwidth of 70 nm - 90 nm. This superluminescent diode has a spectrum ripple of 0.2 dB - 0.5 dB and polarization extinction ratio of 15 dB - 20 dB. It is ideal for fiber sensors, instrumentation, and spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.2 Megapixel CMOS Image Sensor for Imaging Applications | |
CMOS Image Sensor
from ANDANTA
|
| The Sci-CMOS 400BSI from ANDANTA is a 4.2 Megapixel CMOS Image Sensor that has a resolution of 2048 x 2048 pixels. It has a rolling shutter that delivers a frame rate of 48 fps. This CMOS image sensor has a pixel size of 11 μm x 11 μm and dynamic range of 96 dB. It has a back illumination of 95% and line rate of 46 kHz. This CMOS image sensor is ideal for scientific and forensic imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 nm - 1100 nm, Photodiode for Electron Detection Applications | |
Photodiode
from Opto Diode Corporation
|
| The AXUV63HS1 from Opto Diode Corporation is a Photodiode that operates at a wavelength of 200 nm - 1100 nm. It has a circular active area of 63 mm2 and rise time of less than 10 ns. This photodiode has a dark current of up to 100 nA, capacitance of 700 pF, and reverse breakdown voltage over 160 V. It has protective cover plate and is ideal for electron detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 nm THz Photoconductive Antenna for Spectroscopy Applications | |
Photoconductive Antenna
from Thorlabs Inc
|
| The PCA800 from Thorlabs Inc is a Terahertz Photoconductive Antenna that operates at a wavelength of 800 nm. It delivers a THz output power of less than 7 µW and is ideal for applications such as a terahertz emitter or detector in pulsed-laser, gated, broadband THz measurement systems for time-domain spectroscopy, photomixing emitter, continuous-wave THz measurement systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 nm - 850 nm, Terahertz Photoconductive Antenna for Imaging Applications | |
Photoconductive Antenna
from Terahertz Store
|
| The T-Era-20D-800-Air from Terahertz Store is a Terahertz Photoconductive Antenna with a wavelength of 750 nm - 850 nm (excitation). It delivers an average optical power of 1 mW - 15 mW and has a spectrum bandwidth of 2.5 THz. This photoconductive antenna is ideal for terahertz spectroscopy, terahertz imaging, non-destructive testing, hidden object detection, and product inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 780 nm LT-GaAs Photoconductive Antenna for Spectroscopy Applications | |
Photoconductive Antenna
from TYDEX
|
| The PCA-D-50-7.2-780 from TYDEX is an LT-GaAs Photoconductive Antenna that operates at a wavelength of 780 nm. It delivers a maximum output power of 30 mW and has a pulse duration of 120 fs. This photoconductive antenna has a dynamic range of 60 dB (at 0.5 THz) and dark current of 0.2 mA. It is ideal for industrial terahertz imaging and spectroscopy system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Pyroelectric Terahertz Detector for Power Measurement Applications | |
Terahertz Detector
from SLT Sensor & Lasertechnik
|
| The THz 10 HS from SLT Sensor & Lasertechnik is a Pyroelectric Terahertz Detector that has a working range of 1 µW - 1 mW. It has an active area of 10 mm and a current sensitivity of 1.5 µA/W - 1.8 µA/W. This terahertz detector has a rise time of less than 100 µs and chopper frequency of up to 1 kHz. It is ideal for power meters, joule meters, and laser system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz - 700 GHz, Terahertz Detector for Imaging Applications | |
Terahertz Detector
from Terasense Group
|
| The FAST Sub-THz Detector from Terasense Group is a Terahertz Detector with a spectral range of 50 GHz - 0.7 THz. It has a response time of 1 µs and responsivity of 10 V/W. This terahertz detector has a noise equivalent power of 1 nW/rt(Hz) and an impedance of 10 kOhms. It is ideal for wireless communication, terahertz imaging, and scientific research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.3 kV - 5.8 kV, Pockels Cell Driver for Ultrafast Optical Beam Modulation | |
Pockels Cell Driver
from TEO Technology
|
| The PCD-42 from TEO Technology is a Pockels Cell Driver with a high-voltage amplitude of 1.3 kV - 5.8 kV. It has a pulse-to-pulse instability below 1% and HV pulse rise & fall time of 2 ns. This pockels cell driver has a HV pulse duration of 2 ns - 600 ns and plateau amplitude of less than 5%. It is ideal for ultrafast optical beam modulation & deflection, and pulse picker applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1260 nm - 1650 nm, Manual Polarization Controller | |
Polarization Controller
from MKS | Newport
|
| The F-POL-APC from MKS | Newport is a Polarization Controller that operates at a wavelength of 1260 nm - 1650 nm. It has an extinction ratio of 40 dB, insertion loss of less than 0.05 dB, and a return loss above 55 dB. This polarization controller uses a patented all-fiber Babinet-Soleil compensator with a rotatable fiber squeezer for precise adjustments. It supports single-mode fiber and is compatible with FC/APC connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850/1310/1550 nm Fiber Optic Switch for Multi-Channel Measurement Systems | |
Fiber Optic Switch
from Yokogawa Test & Measurement Corporation
|
| The AQ2200-421 from Yokogawa Electric Corporation is a Fiber Optic Switch with a wavelength of 850 nm/1310 nm or 1310 nm/1550 nm. It has an insertion loss of 1 dB and repeatability of ± 0.01 dB. This fiber optic switch is ideal for measuring multiple objects (with switching of the object to be measured) and for building a measurement system in combination with a bit error tester. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 780 nm Optical Frequency Converter for Spectroscopy Applications | |
Optical Frequency Converter
from LD-PD Inc
|
| The WH-0780-000-A-B-C (space out) from LD-PD Inc is an Optical Frequency Converter that operates at a second harmonic generation (SHG) wavelength of 780 nm. It has a pump wavelength of 1560 nm and conversion efficiency greater than 100%/W. This optical frequency converter is ideal for pump source for phase-sensitive amplifiers and Rb atom spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 µm - 14 µm, IR Radiometer for Temperature Measurement Applications | |
Radiometer
from Apogee Instruments
|
| The MI-210 from Apogee Instruments is an Infrared Radiometer with a spectral range of 8 μm - 14 μm. It has a measurement range from -60 °C to 110 °C and calibration uncertainty of 0.2 °C & 0.5 °C. This radiometer is ideal for applications such as plant canopy temperature measurement, road surface temperature measurement, and terrestrial surface temperature measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310/1550 nm OTDR for Fiber Length Measurement Applications | |
Optical Time Domain Reflectometer (OTDR)
from Saluki Technology
|
| The S2106S-S3 from Saluki Technology is an Optical Time Domain Reflectometer (OTDR) that operates at a wavelength of 1310 nm & 1550 nm. It has a pulse width of 3 ns - 20 µs and dynamic range of 26 dB or 24 dB. This OTDR is ideal for FTTx test, CATV network testing, access network testing, LAN network testing, factory testing, and live fiber troubleshooting applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Paradigm-shifting Reflector Design Software for Simulation Applications | |
Optical Design Software
from Breault Research Organization
|
| The RefCad from Breault Research Organization is an Optical Design Software developed for the creation, analysis, and optimization of segmented reflector systems using intuitive graphical controls. It allows users to directly modify the luminous intensity patterns of individual reflector segments. This software is ideal for designing, simulating, and automotive lighting applications. |
| |
Download Datasheet
Product Details | |
|
