| New Photonics Products this Week |
|
|
| 760.9 nm DFB Laser Diode for Spectroscopy Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 760.9 nm. It delivers an output power of 12 mW and has a linewidth (FWHM) of 2 MHz. This continuous wave laser diode is ideal for spectroscopy, metrology, and oxygen detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1534 nm Nanosecond DPSS Laser for Metrology Applications | |
Laser
from RPMC Lasers Inc.
|
| The KAUKAS 3_LAB from RPMC Lasers Inc. is a Diode Pumped Solid State (DPSS) Laser that operates at a wavelength of 1534 nm. It has a pulse width of less than 8 ns and pulse energy of over 3 mJ. This nanosecond laser has a TEM00 spatial mode and is ideal for LiDAR, laser ranging, Laser-Induced Breakdown Spectroscopy, and metrology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.3 µm - 4.7 µm, PbSe Photodiode for Thermal Imaging Applications | |
Photodiode
from Opto Diode Corporation
|
| The BXT2-17TF from Opto Diode Corporation is a Lead Selenide (PbSe) Photodiode that operates at a wavelength of 4.3 µm - 4.7 µm. It has an active element area of 1 mm2 and a detectivity of 2.4 x 1010 cm.rt(Hz)/W (min). This photodiode has a minimum responsivity of 1.2 x 102 V/W and is ideal for gas analysis, medical, industrial, emissions monitoring, spectroscopy, defense & security applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 550 nm - 15000 nm, Infrared Emitter for Back illumination Applications | |
Infrared Emitter
from Thorlabs Inc
|
| The SLS303 from Thorlabs Inc. is an Infrared Emitter that operates at a wavelength of 550 nm - 15000 nm. It delivers an output power of 4.5 W and has a power drift of 0.2%/°C & 0.01%/h. This silicon nitride infrared emitter has an output power stability of 0.05% and is ideal for integration into optical measurement systems for providing back illumination for test targets in detector calibration systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Pyroelectric Terahertz Detector for Laser Systems | |
Terahertz Detector
from SLT Sensor & Lasertechnik
|
| The THz 20 from SLT Sensor & Lasertechnik is a Pyroelectric Terahertz Detector that has a working range of 10 µW - 40 mW. It has an aperture of 20 mm and a sensitivity of 0.5 µA/W. This terahertz detector has a rise time of 700 µs and chopper frequency of up to 200 Hz. It has a maximum power density of 15 mW/cm² and and thermal time constant of 50 ms. This terahertz detector is ideal for power meters, joule meters & laser system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 µm - 440 µm, Pyroelectric Terahertz Detector for Power Measurements | |
Terahertz Detector
from Gentec-EO
|
| The THZ9D-20mS-BL-D0 from Gentec-EO is a Pyroelectric Terahertz Detector that has a spectral range of 10 μm - 440 μm. It delivers a average power of 20 mW (MAESTRO) & 25 mW (U-LINK) and has an average power density of up to 50 mW/cm2. This terahertz detector has a calibration wavelength of 10.6 μm and an optical chopper frequency of 10 Hz ± 1 Hz. It is ideal for power measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 50 GHz - 700 GHz, Terahertz Detector for Research Applications | |
Terahertz Detector
from Terasense Group
|
| The Ultrafast Sub-THz Detector from Terasense Group is a Terahertz Detector with a spectral range of 50 GHz - 0.7 THz. It has a response time of 150 ps & 2 μm and responsivity of 0.5 V/W & 10 V/W. This terahertz detector has a noise equivalent power of 1 nW/rt(Hz) - 2 nW/rt(Hz) and is ideal for wireless communication, terahertz imaging, non-destructive analysis & scientific research applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 532 nm Galilean Beam Expander for Laser Systems | |
Beam Expander
from EKSMA Optics
|
| The 160-0252 from EKSMA Optics is a Beam Expander that operates at a wavelength of 532 nm. It has an expansion ratio of 2.5 x and tube length of 46.5 mm. This beam expander has a transmission above 96% and screw size of M22 mm x 0.75 mm. It features a Galilean design with AR-coated fused silica lenses for high transmission efficiency. This beam expander has a laser damage threshold of 5 J/cm2 and is ideal for reducing laser beam divergence in laser systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm - 5000 nm, Acousto-Optic Tunable Filter for Spectrometer Applications | |
Acousto-Optic Tunable Filter
from Elent A
|
| The AOTF from Elent A is an Acousto-Optic Tunable Filter that operates at wavelengths of 450 nm - 750 nm, 900 nm - 1200 nm, 1200 nm - 2500 nm, and 2500 nm - 5000 nm. It has a bandwidth of 0.5 nm - 15 nm and an angular aperture of 2 deg - 10 deg. This AOTF is ideal for LiDAR, rapid-scan spectrometers, multispectral imaging, fiber optic communication, and fluorescence spectrometer applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 830 nm Electro-Optic Intensity Modulator for Quantum Communications | |
Electro-Optic Intensity Modulator
from Sintec Optronics
|
| The STK-AM-08 from Sintec Optronics is an Electro-Optic Intensity Modulator that operates at a wavelength of 830 nm. It has a bandwidth (-3 dB) of 2.5 GHz and rise time of 150 ps. This electro-optic intensity modulator has an extinction ratio of 28 dB and insertion loss of 5 dB. It is ideal for high-speed optical fiber communication systems, microwave fiber links, and quantum communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310 nm - 1900 nm, Fiber Optic Isolators for Instrumentation Applications | |
Fiber Optic Isolator
from AGILTRON
|
| The OISM from AGILTRON are Fiber Optic Isolators that operate at a center wavelength of 1310 nm - 1900 nm. They have a wavelength bandwidth of 160 nm and an isolation 20 dB - 30 dB. These fiber optic isolators have a polarization-dependent loss of 0.25 dB and return loss of 50 dB - 55 dB. They are ideal for optical fiber amplifiers, pump laser sources, fiber optic sensors, and instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850/1310/1550 nm, Fiber Optic Switch for Measuring Device Characteristics | |
Fiber Optic Switch
from Yokogawa Test & Measurement Corporation
|
| The AQ2200-412 from Yokogawa Electric Corporation is a Fiber Optic Switch that operates at a wavelength of 850 nm/1310 nm or 1310 nm/1550 nm. It has an insertion loss of 1 dB and repeatability of up to ± 0.01 dB. This fiber optic switch is ideal for measuring multiple objects, measuring device characteristics & for building a measurement system in combination with a bit error tester. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 0.44 µm - 10.6 µm, Optical Power Meter for Research Applications | |
Laser Power Meter
from MKS | Ophir
|
| The Ariel from MKS | Ophir are Optical Power Meters that operate at a wavelength of 0.44 µm - 10.6 µm. They have a power range of 200 mW - 8000 mW and an exposure time of 0.05 s - 2 s (pulsed mode) & 10 s (CW mode). These optical power meters have an Laser Protection Level 2 absorber and are ideal for additive manufacturing chambers, production process quality control and R&D applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 Megapixel CMOS Monochrome Camera for Automation Applications | |
Scientific & Industrial Camera
from Baumer
|
| The VAX-50C.I.NVX from Baumer is a 5 MP CMOS Monochrome Camera that has a resolution of 2448 x 2048 pixels. It has a global shutter in a 2/3" optical format that delivers a frame rate of 73 fps, 76 fps & 77 fps. This camera has a Sony IMX250 Gen2 progressive scan CMOS sensor with a pixel size of 3.45 μm x 3.45 μm. It is ideal for industrial inspection and automation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 350 nm - 925 nm, Spectrometer for Research & Biomedical Applications | |
Spectrometer
from Ocean Optics
|
| The OCEAN-HDX-VIS-NIR from Ocean Optics is a Spectrometer with a spectral range of 350 nm - 925 nm. It has a resolution of 0.7 nm and a dynamic range of 12000:1. This spectrometer has a back-thinned CCD detector and slit size of 10 µm. It is ideal for applications that include thin film analysis on a production line, research, and integration into biomedical instrumentation. |
| |
Download Datasheet
Product Details | |
|
