| Featured Products this Week |
|
|
| 527 nm Q-Switched Nd:YLF Lasers for Ultrafast Pumping Applications | |
Laser
from UpTek Solutions
|
| The Lucia from UpTek Solutions are diode-pumped, Q-switched Nd:YLF lasers that operate at a wavelength of 527 nm. They deliver an output power of up to 45 W and have a repetition rate of 1 kHz - 10 kHz. These second harmonic lasers have a pulse energy above 38 mJ (at 1 kHz) and are ideal for ultrafast pumping, PIV, material processing, micromachining & laser ultrasonic applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 nm - 1100 nm, Photodetector for Photometry Applications | |
Photodetector
from Opto Diode Corporation
|
| The ODA-6WB-100M from Opto Diode Corporation is a Photodetector that operates at a wavelength of 400 nm - 1100 nm. It has a frequency response range 1000 Hz (at -3 dB) and sensitivity of 20 V/μW. This blue enhanced photodetector has an active area of 5.87 mm2 and a transimpedance gain of 100 MOhms. It is ideal for photometry & colorimetry, pulse oximetry, and bar code reader applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pyroelectric Terahertz Detector for Power Meter Applications | |
Terahertz Detector
from SLT Sensor & Lasertechnik
|
| The THz 20 HS from SLT Sensor & Lasertechnik is a Pyroelectric Terahertz Detector that has a working range of 1 µW - 5 mW. It has an active area of 20 mm and a current sensitivity of 1.5 µA/W - 1.8 µA/W. This terahertz detector has a rise time of 350 µs and chopper frequency of up to 500 Hz. It is ideal for power meters, joule meters, and laser system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz - 700 GHz, Terahertz Detector for Imaging Applications | |
Terahertz Detector
from Terasense Group
|
| The FAST Sub-THz Detector from Terasense Group is a Terahertz Detector that has a spectral range of 50 GHz - 0.7 THz. It has a response time of 1 μs and responsivity of 10 V/W. This terahertz detector has a noise equivalent power of 1 nW/rt(Hz) and an impedance of 10 kOhms. It is ideal for wireless communication, terahertz imaging, and non-destructive analysis applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Paradigm-shifting Reflector Design Software for Simulation Applications | |
Optical Design Software
from Breault Research Organization
|
| The RefCad from Breault Research Organization is an Optical Design Software developed for the creation, analysis, and optimization of segmented reflector systems using intuitive graphical controls. It allows users to directly modify the luminous intensity patterns of individual reflector segments. This paradigm-shifting reflector design tool automatically updates the corresponding segment prescription. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Design Software for Optimization Applications | |
Optical Design Software
from Optenso
|
| The OpTaliX® from Optenso is an Optical Design Software for the computer-aided design, optimization, analysis, and documentation of optical systems, thin-film multilayer coatings & illumination systems. It supports sequential & non-sequential ray tracing, along with zoom and multi-configuration optical systems. The software also provides geometrical & diffraction analysis, polarization analysis, illumination analysis, environmental analysis, and tolerance analysis. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Lambda Research Corporation | | |
|
|
| 8 µm - 14 µm, IR Radiometer for Temperature Measurement Applications | |
Radiometer
from Apogee Instruments
|
| The MI-210 from Apogee Instruments is an Infrared Radiometer that has a spectral range of 8 μm - 14 μm. It has a measurement range from -60 °C to 110 °C and calibration uncertainty of 0.2 °C & 0.5 °C. This handheld radiometer has a measurement repeatability of less than 0.05 °C and is ideal for applications such as plant canopy, road surface & terrestrial surface temperature measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 340 nm - 432 nm, Ultraviolet Radiometer | |
Radiometer
from Miltec UV
|
| The LEDMAP from Miltec UV is an Ultraviolet Radiometer that has a spectral response range of 340 nm - 432 nm. It has an irradiance of 400 mW/cm²- 40 W/cm² (or up to 250 J/cm²) and a dynamic range of 40W/cm². This radiometer has an accuracy of ± 2% and maximum repeatability of 1%. It has a battery life of 100 minutes and memory capacity of 65 minutes (data collection time). This radiometer has a J-type thermocouple with an effective sample rate of 32 Hz. |
| |
Download Datasheet
Product Details | |
|
