Latest Photonics Products. View it in your browser
| | | Weekly Edition | | | Date: 21 May 2026 | | | |
| Sponsored by everything PE | | |
| New Photonics Products this Week | |
|
| 1064 nm DFB Laser Diode for Sensing Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 1064 nm. It delivers an output power of 500 mW and has a linewidth (FWHM) of 2 MHz. This laser diode has a pulse width of 10 ns and repetition rate of 200 kHz. It has a slope efficiency of 0.4 W/A and is ideal for spectroscopy, metrology, sensing, and seed laser applications. |
| |
Download Datasheet
Product Details | |
| | |
| 2100 nm Laser Mirror for Ho:YAG Laser Applications | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM247 from OPTOMAN is a Laser Mirror that operates at a wavelength of 2100 nm. It has a diameter of 25.4 mm, thickness of 6.35 mm, and chip size of less than 0.2 mm. This mirror has a clear aperture greater than 90 mm and surface quality of 10-5 S-D (scratch-dig) (S1/S2). It has a maximum surface flatness of 1/10th of wavelength (at 633 nm) and is ideal for efficient beam shaping in ultrafast Ho:YAG laser systems. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| 700 nm - 1100 nm, Photodetector for Photometry Applications | |
Photodetector
from Opto Diode Corporation
|
| The ODA-6WB-100M from Opto Diode Corporation is a Photodetector that operates at a wavelength of 400 nm - 1100 nm. It has a frequency response range of 1000 Hz (at -3 dB) and sensitivity of 20 V/μW. This blue enhanced photodetector has an active area of 5.87 mm2 and a transimpedance gain of 100 MOhms. It is ideal for photometry & colorimetry, pulse oximetry, and bar code reader applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | | |
|
| | |
| Pyroelectric Terahertz Detector for Power Meter Applications | |
Terahertz Detector
from SLT Sensor & Lasertechnik
|
| The THz 20 HS from SLT Sensor & Lasertechnik is a Pyroelectric Terahertz Detector that has a working range of 1 µW - 5 mW. It has an active area of 20 mm and a current sensitivity of 1.5 µA/W - 1.8 µA/W. This terahertz detector has a rise time of 350 µs and chopper frequency of up to 500 Hz. It is ideal for power meters, joule meters, and laser system applications. |
| |
Download Datasheet
Product Details | |
| | |
| 50 GHz - 700 GHz, Terahertz Detector for Imaging Applications | |
Terahertz Detector
from Terasense Group
|
| The FAST Sub-THz Detector from Terasense Group is a Terahertz Detector that has a spectral range of 50 GHz - 0.7 THz. It has a response time of 1 μs and responsivity of 10 V/W. This terahertz detector has a noise equivalent power of 1 nW/rt(Hz) and is ideal for wireless communication, terahertz imaging, non-destructive analysis, and scientific research applications. |
| |
Download Datasheet
Product Details | |
| | |
| 120 MHz Acousto-Optic Modulator Driver | |
Acousto-Optic Modulator Driver
from Optisenses
|
| The QDQ-TTL-120M-2.5W from Optisenses is an Acousto-Optic Modulator Driver that has a frequency of 120 MHz. It delivers a RF power of 2.5 W and has a frequency stability of ± 30 ppm. This acousto-optic modulator driver operates in TTL modulation mode with a logic level of up to 5 V. It is RoHS compliant and has an output impedance of 50 Ohms. This acousto-optic modulator driver requires a DC supply voltage of 24 V and consumes 380 mA of current. |
| |
Download Datasheet
Product Details | |
| | |
| 400 nm - 750 nm, Electro-Optic Deflector for Research Applications | |
Electro-Optic Deflector
from Conoptics
|
| The 311A from Conoptics is an Electro-Optic Deflector that has a spectral range of 400 nm - 750 nm. It has an aperture of 2.5 mm and a deflection efficiency of 3 µrad/volt. This electro-optic deflector is ideal for material processing, precise control, cutting, welding, surface modification, optical communications, scientific research, microscopy, spectroscopy, and biological samples applications. |
| |
Download Datasheet
Product Details | |
| | |
| |
| 1 µm - 1.5 µm, Electro-Optic Deflector for Laser Marking Applications | |
Electro-Optic Deflector
from NTT Advanced Technology Corporation
|
| The 2D KTN optical deflector from NTT Advanced Technology Corporation is an Electro-Optic Deflector that operates at wavelengths of 1 μm - 1.5 μm. It has a deflection angle of 120 x 96 mrad and driving frequency of 10 kHz - 100 kHz. This electro-optic deflector is ideal for OCT, endoscope, surveying system, laser microscope, laser processing, laser marking, and optical switch applications. |
| |
Download Datasheet
Product Details | |
| | |
| Electro-Optic Q-Switch for Pulsed Solid-State Laser Applications | |
Electro-Optic Q-Switch
from WISOPTIC
|
| The IMA8b from WISOPTIC is an Electro-Optic Q-Switch that has a clear aperture of Ø8 mm. It has a voltage contrast ratio above 2000:1 (at 1064 nm) and wavefront distortion of lambda/6. This EOQS has a single pass insertion loss below 2% (1064 nm) and an intrinsic contrast ratio above 5000:1. It is ideal for low-repetition-frequency, low-power pulsed solid-state laser applications. |
| |
Download Datasheet
Product Details | |
| | |
| Polarization Modulator for Optical Switching Applications | |
Polarization Modulator
from LC-Tec
|
| The X-FPM(L)-AR from LC-Tec is a Polarization Modulator that has a transmittance above 43%. It has a response time of up to 30 s and relaxation time of less than 1.8 ms. This polarization modulator has a reflectance per surface below 0.5% and polarizer transmission axis of 45 degrees. It is ideal for high-frequency switching between two linear polarization states. |
| |
Download Datasheet
Product Details | |
| | |
| Electro-Optic Polarization Modulator for Quantum Encryption Applications | |
Polarization Modulator
from Versawave
|
| The PL-40G-5-1550 from Versawave is an Electro-Optic Polarization Modulator that operates at a wavelength of 1530 nm - 1610 nm. It has an electro-optic bandwidth of 40 GHz and a polarization extinction ratio above 20 dB. This polarization modulator is ideal for analog & digital, polarization multiplexing & de-multiplexing, high-speed test equipment, and optical quantum encryption applications |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Polarization Extinction Ratio Meter for Measurement Applications | |
Polarization Extinction Ratio Meter
from Inline Photonics
|
| The CUBE-ER100 from Inline Photonics is a Polarization Extinction Ratio Meter that operates at a wavelength of 600 nm - 1650 nm. It has calibration wavelengths of 630 nm, 850 nm, 980 nm, 1060 nm, 1310 nm & 1550 nm and is ideal for PER measurement of components with PM pigtails, fiber array/MTP assemblies, waveguide chips & DFB or ITLA lasers applications. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| 340 nm - 432 nm, Ultraviolet Radiometer | |
Radiometer
from Miltec UV
|
| The LEDMAP from Miltec UV is an Ultraviolet Radiometer that has a spectral response range of 340 nm - 432 nm. It has an irradiance of 400 mW/cm²- 40 W/cm² (or up to 250 J/cm²) and a dynamic range of 40W/cm². This radiometer has an accuracy of ± 2% and maximum repeatability of 1%. It has a battery life of 100 minutes and memory capacity of 65 minutes. This radiometer has a J-type thermocouple with an effective sample rate of 32 Hz. |
| |
Download Datasheet
Product Details | |
| | |
| Optical Design Software for Optimization Applications | |
Optical Design Software
from Optenso
|
| The OpTaliX® from Optenso is an Optical Design Software for the computer-aided design, optimization, analysis, and documentation of optical systems, thin-film multilayer coatings & illumination systems. It supports sequential & non-sequential ray tracing, along with zoom and multi-configuration optical systems. The software also provides geometrical & diffraction analysis, polarization analysis, illumination analysis, environmental analysis, and tolerance analysis. |
| |
Download Datasheet
Product Details | |
| | |
| Paradigm-shifting Reflector Design Software for Simulation Applications | |
Optical Design Software
from Breault Research Organization
|
| The RefCad from Breault Research Organization is an Optical Design Software developed for the creation, analysis, and optimization of segmented reflector systems using intuitive graphical controls. It is a paradigm-shifting reflector design tool automatically updates the corresponding segment prescription with any graphical adjustment and streamlining the overall design process. |
| |
Download Datasheet
Product Details | |
|
| Featured Article | | What is Blue Light? | | Blue light is a crucial component of the visible light spectrum, with wavelengths ranging from 450 nm to 500 nm (4500 Å to 4950 Å) and corresponding frequencies between 610 THz and 670 THz, located at the shorter end of the spectrum near violet light, and defined by its characteristic blue color. Click here to read the full article. | | | |
| | About GoPhotonics | | GoPhotonics keeps you up to date with the Photonics Industry with New Products, News, Upcoming Events and more. We have the largest searchable database of Photonics products that consist of Lasers, CMOS Image Sensors, Optical Components and Test & Measurement Equipment. Would you like to Unsubscribe? If so, click here. |
|
| To unsubscribe please click here | {{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}} |
|
