New Photonics Products this Week |
|
|
1510 nm - 1630 nm, CW Tunable Laser for Spectroscopy Applications |
Laser
from TOPTICA Photonics
|
The CTL 1550 from TOPTICA Photonics is a Tunable Laser that operates at a wavelength of 1510 nm - 1630 nm. It delivers an output power above 50 mW and has a maximum scan speed of 10 nm/s. This continuous wave laser has an absolute accuracy of less than 150 pm and is ideal for micro-cavities & pumping microcombs, quantum dots, component testing, and spectroscopy applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
830 nm CW Laser Diode for Raman Spectroscopy & Medical Applications |
Laser Diode
from Sheaumann Laser
|
The BF-830-0070 from Sheaumann Laser is a Continuous Wave Laser Diode that operates at a wavelength of 830 nm. It delivers an output power of 70 mW and has a slope efficiency of 0.7 W/A. This single-mode laser diode requires a threshold current of 35 mA, DC voltage of 2.1 V, and consumes 130 mA of current. It is ideal for Raman spectroscopy & medical applications. |
|
Download Datasheet
Product Details | |
|
|
|
980 nm FBG Pump Laser Diode for CATV Distribution Applications |
Laser Diode
from Lumentum Operations LLC
|
The S30-xxxx-420 from Lumentum Operations LLC is a Fiber Bragg Grating Pump Laser Diode that operates at a wavelength of 980 nm. It delivers a minimum output power of 20 mW and has a power stability of 2%. This laser diode has a cut-off wavelength of 920 nm and is ideal for dense WDM EDFAs, high bit-rate, high channel-count EDFAs and CATV distribution applications. |
|
Download Datasheet
Product Details | |
|
|
|
1650 nm DFB Laser Diode for Fiber Optic Sensor Applications |
Laser Diode
from NTT Electronics Corporation
|
The NLK1U5FAAA from NTT Electronics Corporation is a DFB Laser Diode that operates at a wavelength of 1650 nm. It delivers a minimum fiber output power of 15 mW and has a spectral linewidth of 2 MHz. This laser diode has a side mode suppression ratio above 35 dB and is ideal for Near-IR gas analysis, tunable diode laser absorption spectroscopy (TDLAS), and fiber optic sensor applications. |
|
Download Datasheet
Product Details | |
|
|
|
0.1 Megapixel Back-Side Illuminated CMOS Image Sensor for AR Applications |
CMOS Image Sensor
from Prophesee
|
The GENX320 from Prophesee is a 0.1 Megapixel CMOS Image Sensor that has a resolution of 320 x 320 pixels. It is shutter-free in a 1/5" optical formal that delivers a frame rate above 10k fps. This back-side illuminated CMOS image sensor has a pixel size of 6.3 µm x 6.3 µm and is ideal for AR/VR/XR, IoT, AI on the edge, machine learning, always-on cameras, cameras, and smart home applications. |
|
Download Datasheet
Product Details | |
|
|
|
4 Megapixel CMOS Image Sensor for Medical & Industrial Applications |
CMOS Image Sensor
from IMASENIC
|
The Sagara1212 from IMASENIC is a 4 Megapixel CMOS Image Sensor that has an active area of 119 mm x 119 mm. It delivers a frame rate of 5200 fps (at 8 bit resolution) & 3300 fps (at 10-bit resolution) and has a data rate of 200 Gbps. This CMOS sensor has 24576 column-parallel ADCs and is ideal for X-ray applications, medical, industrial & NDT in the semiconductor industry. |
|
Download Datasheet
Product Details | |
|
|
|
850 nm Infrared LED for Modulated Light Barrier Applications |
LED
from iC-Haus
|
The iC-SD85 oLGA SD2C3 from iC-Haus is an Infrared LED that operates at a peak wavelength of 850 nm. It has a spectral half-width of 30 nm and radiant power of 6 mW. This LED has a switching time of 12 ns and minimum reverse voltage of 5 V. It has a forward voltage of 1.4 V and is ideal for illumination for high-resolution optical encoders and modulated light barrier applications. |
|
Download Datasheet
Product Details | |
|
|
|
5 µm Pyroelectric Extended Infrared Detector for Gas Sensing Applications |
Pyroelectric Detector
from Broadcom
|
The AFBR-S6EPY32271R from Broadcom is a Pyroelectric Extended Infrared Detector that operates at a wavelength above 5 µm. It has a field of view of 40o and specific detectivity of 2.5 x 108 cm.sqrt(Hz)/W. This thin film pyroelectric detector has a noise-equivalent power of 2.7 x 10-10 W/sqrt(Hz) and is ideal for gas sensing, flame & motion detection, and gesture recognition applications. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by PCB Directory | |
|
|
50.8 mm Dia, VUV Optical Bandpass Filter |
Optical Filter
from eSource Optics
|
The 50161FNB from eSource Optics is a Vacuum UV (VUV) optical bandpass filter that allows transmission at a peak wavelength of 161 nm. It has a bandwidth (FWHM) of 20 nm and wavelength tolerance of ± 2.5 nm. This optical filter has a minimum optical peak transmission of 12% and blocks approximately 10-3 UV through FIR. The edge chamfer of this optical filter measures nearly 0.5 mm x 45 degrees and has a clear aperture of 80% (central). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
0.5 km - 250 km, Tri-Wavelength Optical Time Domain Reflectometer |
Optical Time Domain Reflectometer (OTDR)
from Anritsu Corporation
|
The MU909015C/C6-057 from Anritsu Corporation is a Tri-Wavelength Optical Time Domain Reflectometer (OTDR) module that operate at wavelengths of 1310 nm/1550 nm or 1625 nm. It has a wavelength accuracy of ± 20 nm & ± 15 nm and pulse width of 5 ns - 500 ns & 1 µs - 20 µs. This OTDR has a dynamic range of 38 dB/37 dB/35 dB (at 20 µs) and 27 dB/26 dB/25 dB (at 500 ns). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
2 µm - 5 µm, Mid-IR Spectrometers for MIR Spectroscopy Applications |
Spectrometer
from NLIR
|
The NLIR-S2050 from NLIR are Mid-infrared Spectrometers that have an optical bandwidth of 2 µm - 5 µm. They have spectral resolutions of 6 cm-1, 3 cm-1 & 2.5 cm-1 with maximum readout rates of 400 Hz, 1.4E3 Hz & 130E3 Hz respectively. These vertically polarised spectrometers are ideal for optical coating measurement, 80 kHz mid-infrared spectroscopy, and kHz-rate OCT applications. |
|
Download Datasheet
Product Details | |
|
|
|
200 nm - 900 nm, Single Photon Spectrometer |
Spectrometer
from Miftek
|
The SPS-100 from Miftek is a Single Photon Spectrometer that operates at a wavelength of 200 nm - 900 nm. It has a spectral resolution of 1 nm (FWHM) and groove density of 1,200 grooves/mm. This spectrometer has a wavelength resolution of 0.1 nm step and fast scanning speed of 500 nm/s. It includes a GPS-10 sensor unit, GPC-10 counter unit & CS-001 control software and supports FO-1 FC/SMA fiber optical cables. |
|
Download Datasheet
Product Details | |
|