| New Photonics Products this Week |
|
|
| 920 nm Femtosecond Fiber Laser for Two-photon Microscopy Applications | |
Laser
from TOPTICA Photonics
|
| The FemtoFiber ultra 920 from TOPTICA Photonics is a Femtosecond Fiber Laser that operates at a wavelength of 920 nm. It delivers an average output power above 1.5 W and has a pulse duration of less than 100 fs & repetition rate of 80 MHz. This linearly & vertically polarized laser has a polarization extinction ratio of 100:1 and is ideal for two-photon microscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1030 nm Solid-State Laser for Deep welding & Cutting Applications | |
Laser
from TRUMPF
|
| The TRUDISK 4006 from TRUMPF is a Solid-State Laser that operates at a wavelength of 1030 nm. It delivers an output power of 4000 W and has a continuously adjustable power range of 80 W - 4000 W with active power regulation. This laser has a beam quality factor of 25 mm.mrad and is ideal for deep welding, hybrid welding of huge ship decks, and laser metal deposition applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm CW Laser Diode for Raman Spectroscopy & Medical Applications | |
Laser Diode
from Sheaumann Laser
|
| The CMC-A64-1000-1 from Sheaumann Laser is a CW Laser Diode that operates at a wavelength of 1064 nm. It delivers an output power of 1 W and has a slope efficiency of 0.8 W/A. This multimode laser diode has a beam divergence of 30 degrees (vertical far-field) and 8 degrees (horizontal far-field) at FWHM. It is ideal for Raman spectroscopy, laser pumping, and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 808 nm Free Space Narrow Linewidth Laser Diode for Medical Applications | |
Laser Diode
from Frankfurt Laser Company
|
| The FRLD-808-600-FS-VBG-BTF from Frankfurt Laser Company is a Free Space Narrow Linewidth Laser Diode that operates at a wavelength of 808 nm. It delivers a continuous wave output power of 600 mW and has a slope efficiency of 0.9 W/A. This laser diode has a maximum spectral width (FWHM) of 0.3 nm and is ideal for spectrum analysis, scientific research, and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.79 Megapixel CCD Image Sensor for Earth Observation Imaging Applications | |
CCD Image Sensor
from Teledyne Imaging
|
| The IC-34-12288 from Teledyne Imaging is a 0.79 Megapixel CCD Image Sensor that has a resolution of 12288 x 64 pixels. It operates at wavelengths of 400 nm - 700 nm (Visible) and has a pixel size of 7 µm x 7 µm. This image sensor has fast line rates of up to 16 kHz (with 16 taps) or 8.3 kHz (with 8 taps) and is ideal for earth observation imaging and living planet sciences applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 64 µm x 5.25 µm, CCD Linear Image Sensor for Barcode Reader Applications | |
CCD Image Sensor
from Toshiba Corporation
|
| The TCD1254GFG from Toshiba is a CCD Linear Image Sensor that has a pixel size of 64 (H) µm x 5.25 (V) µm. It has 2500 image-sensing elements, data rate of 1 MHz. This B/W CCD image sensor has a sensitivity of 103 V/lx.s and dynamic range of 400. It has a total transfer efficiency of 95% and an output impedance of 0.5 kOhms. This CCD image sensor is ideal for barcode reader applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Channel Pyroelectric Detector for Flame Detection Applications | |
Pyroelectric Detector
from InfraTec
|
| The LME-336 from InfraTec GmbH Infrarotsensorik und Messtechnik is a Single Channel Pyroelectric Detector that has a minimum field of view of 80o (CaF2 or BaF2 0.4 mm thick) or 90o (silicon substrate 0.5 mm thick). It has a detectivity of 4 x 108 cm·sqrt(Hz)/W and an rms noise density of 57 µV/sqrt(Hz). This pyroelectric detector is ideal for gas analysis, flame detection, and radiometry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 440 nm - 700 nm, Dense Flint Glass Acousto-Optic Deflector | |
Acousto-Optic Deflector
from IntraAction Corp.
|
| The ADM-40 from IntraAction Corp. is an Acousto-Optic Deflector that operates at a wavelength of 440 nm - 700 nm. It has a center RF frequency of 40 MHz and deflection RF bandwidth of 20 MHz. This acousto-optic deflector has an optical frequency shift range of 30 MHz - 50 MHz and a diffraction efficiency of 85%. It has a beam separation of 6.5 mrad and an angular deflection of 3.2 mrad (at 633 nm). |
| |
Download Datasheet
Product Details | |
|
|
|
| 1064 nm TeO2 Acousto-Optic Deflector | |
Acousto-Optic Deflector
from BeamQ Lasers
|
| The GA-AOD-1064-300M-A7-GH1 from BeamQ Lasers is an Acousto-Optic Deflector that operates at a wavelength of 1064 nm. It has a center frequency of 300 MHz and transmission above 99%. This AOD has an active aperture of 7mm (H) x 7mm (W) and a Voltage Standing Wave Ratio (VSWR) of up to 3:1 (at RF bandwidth). It has a separation angle of 76 mrad and scan angle of 31.7 mrad. This AOD has a diffraction efficiency above 55% and damage threshold of over 50 W. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by everything PE | | |
|
|
| 1030/1064/1550/2000 nm TeO2 Acousto-Optic Frequency Shifters | |
Acousto-Optic Frequency Shifter
from CSRayzer
|
| The Fiber Coupled Frequency shifter from CSRayzer are Acousto-Optic Frequency Shifters that operate at wavelengths of 1030 nm, 1064 nm, 1550 nm, and 2000 nm. They deliver an average optical power of 0.5 W - 5 W and have an ultrasonic velocity of 4200 m/s. These TeO2 acousto optic frequency shifters have a frequency of 20 MHz, 80 MHz, 100 MHz, 120 MHz, 150 MHz and 300 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 nm - 450 nm, TeO2 Acousto-Optic Frequency Shifter | |
Acousto-Optic Frequency Shifter
from Photon Lines
|
| The DT230-B120A0,5-UV from Photon Lines is an Acousto-Optic Frequency Shifter that operates at a wavelength of 400 nm - 450 nm. It has a frequency shift of 230 ± 60 MHz and resolution of 500 nm. This linearly polarised acousto-optic frequency shifter has a deflection angle range of 11.4 (at 400 nm) and an efficiency above 50%. It uses TeO2 material and has an aperture size of 0.5 mm x 17.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Electro-Optic Intensity Modulator for Test & Measurement Applications | |
Electro-Optic Intensity Modulator
from iXblue Photonics
|
| The MX-LN-05-PD-P-P-FA-FA from iXblue Photonics is an Electro-Optic Intensity Modulator that operates at a wavelength of 1550 nm. It has an electro-optical bandwidth of 4 GHz and a data rate of up to 56 Gb/s. This electro-optic intensity modulator has an RF half-wave voltage of 3.5 V (at 50 Hz) and is ideal for digital communications, general-purpose intensity modulation, and measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1060 nm LiNbO3 Electro-Optic Intensity Modulator for Sensing Applications | |
Electro-Optic Intensity Modulator
from Beijing Rofea Optoelectronics
|
| The Rof-AM from Beijing Rofea Optoelectronics is a LiNbO3 Electro-Optic Intensity Modulator that operates at a wavelength of 1060 nm. It has a bandwidth of 300 MHz and an RF half-wave voltage of 3 V. This electro-optic intensity modulator has a switch extinction ratio of 23 dB and is ideal for fiber optic sensing system and pulsed light modulation system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 µm - 5 µm, Mid-IR Spectrometers for MIR Spectroscopy Applications | |
Spectrometer
from NLIR
|
| The NLIR-S2050 from NLIR are Mid-infrared Spectrometers that have an optical bandwidth of 2 µm - 5 µm. They have spectral resolutions of 6 cm-1, 3 cm-1 & 2.5 cm-1 with maximum readout rates of 400 Hz, 1.4E3 Hz & 130E3 Hz respectively. These vertically polarised spectrometers are ideal for optical coating measurement, 80 kHz mid-infrared spectroscopy, and kHz-rate OCT applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850 nm - 2300 nm, Free Space AOTF-NIR Spectrometer | |
Spectrometer
from Brimrose Corporation
|
| The Luminar 4030 from Brimrose Corporation is a Free Space NIR spectrometer that operates at spectral ranges of 850 nm - 1700 nm, 900 nm - 1800 nm and 1100 nm - 2300 nm (standard). It has a spectral resolution of 2 nm - 10 nm, wavelength accuracy of ± 0.5 nm, and is ideal for food & agricultural - analyzes from field to factory, fluidized bed drying, and tablet coating inspection applications. |
| |
Download Datasheet
Product Details | |
|
