| Featured Products this Week |
|
|
| 532 nm - 1064 nm, Pulsed Nd:YAG Laser for Laser Peening Applications | |
Laser
from Amplitude Laser
|
| The Intrepid HE from Amplitude Laser is a Pulsed Nd:YAG Laser that operates at a wavelength of 532 nm - 1064 nm. It delivers an average output power of 500 W - 700 W and has a pulse width of 1 ns - 8 ns & 200 ps - 100 ns (optional). This laser has a pulse energy of up to 50 J (at 532 nm) & 70 J (at 1064 nm) above 1.5 ns and pulse repetition rate of less than 10 Hz. It is ideal for scientific and industry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm Motorized Focal Length Laser for 3D Scanner Applications | |
Laser
from LECC Technology
|
| The AP45600001 from LECC Technology is a Motorized Focal Length Laser that operates at a wavelength of 450 nm. It delivers a continuous-wave output power of up to 70 mW and has a line size below 30 µm (at 80 mm & 120 mm). This laser requires a DC supply voltage of 24 V and consumes 20 mA - 500 mA of current. It is ideal for 3D scanners & advanced vision inspection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1690 nm DFB Laser Diode for Water Vapor Spectroscopy Applications | |
Laser Diode
from Sacher Lasertechnik
|
| The DFB-1690-005 from Sacher Lasertechnik is a Distributed Feedback (DFB) Laser Diode that operates at a wavelength of 1690 nm. It delivers an output power of 5 mW and has a spectral width of 1.5 MHz. This laser diode has a wavelength tuning of 2 nm and slope efficiency of 0.15 mW/mA. It has TE00 mode and is ideal for water vapor spectroscopy, scientific & industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9.325 µm x 9.325 µm, CCD Linear Image Sensor for Photocopier Applications | |
CCD Image Sensor
from Toshiba Corporation
|
| The TCD2711DG from Toshiba Corporation is a CCD Linear Image Sensor that has a pixel size of 9.325 (H) µm x 9.325 (V) µm. It has 7500 image-sensing elements with a spectral resolution of 24 lines/mm and data rate of 70 MHz (color). This CCD image sensor has a sensitivity of 18.9 V/lx.s (Red), 20.4 V/lx.s (Green) and 13.4 V/lx.s (Blue). It is ideal for color scanners & photocopier applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| InGaAs Triple H SWIR Sensor for Optical Metrology & Welding Applications | |
SWIR Sensor
from New Imaging Technologies
|
| The NSC2001 from New Imaging Technologies is an InGaAs Triple H SWIR Sensor that has a resolution of 320 (H) x 256 (V) pixels. It has a pixel size of 15 µm x 15 µm and noise level of up to 50 e-. This SWIR sensor operates in linear & logarithmic modes and has a dynamic range above 120 dB. It is ideal for additive manufacturing, welding, and laser communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Channel Pyroelectric Detector for Gas Analysis Applications | |
Pyroelectric Detector
from InfraTec
|
| The LRM-284 from InfraTec GmbH Infrarotsensorik und Messtechnik is a Multi-Channel Pyroelectric Detector that has a minimum field of view of 70o. It has a detectivity of 4.5 x 108 cm·sqrt(Hz)/W and rms noise density of up to 45 µV/sqrt(Hz). This pyroelectric detector operates in current mode and has a thermal time constant of 100 ms. It is ideal for gas analysis & flame detection applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 MHz MgO:LiNbO3 Electro-Optic Phase Modulator for Spectroscopy Applications | |
Electro-Optic Phase Modulator
from Photonics Technologies
|
| The EOM-02-3-V from Photonics Technologies is a Magnesium Oxide-Doped Lithium Niobate Electro-Optic Phase Modulator that operates at a wavelength of 650 nm - 1000 nm. It has a modulation frequency of 3 MHz and modulation bandwidth of 150 kHz. This electro-optic phase modulator is ideal for the generation of side-bands on single-frequency lasers for high-resolution locking techniques. |
| |
Download Datasheet
Product Details | |
|
|
|
| 635 nm Fiber-Coupled Electro-Optic Phase Modulator for OCT Applications | |
Electro-Optic Phase Modulator
from Jenoptik
|
| The PM635 from Jenoptik is a Waveguide-Based Fiber-Coupled Electro-Optic Phase Modulator that operates at a wavelength of 635 nm. It has a spectral bandwidth of ± 20 nm and half-wave voltage of 5 V. This electro-optic phase modulator has an insertion loss of 6 dB and optical rise time above 200 ps. It is ideal for sideband generation, interferometric metrology, and OCT applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
