| Featured Products this Week |
|
|
| 1070 nm Adjustable Ring Mode Fiber Lasers for Cutting Applications | |
Laser
from Coherent Corp.
|
| The HighLight FL-ARM Compact Series from Coherent are Adjustable Ring Mode (ARM) Fiber Lasers that operate at wavelength of 1070 nm. They deliver an output power of 2000 W - 10000 W and have a wavelength accuracy of ± 10 nm. These single mode or multimode lasers are ideal for high-quality welding of challenging materials like high-strength steel, or copper & cutting applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 355 nm UV Picosecond Pulsed Laser for Cutting & Drilling Applications | |
Laser
from MKS | Spectra-Physics
|
| The IceFyre UV50 from MKS | Spectra-Physics is a UV Picosecond Laser that operates at a wavelength of 355 nm. It delivers an output power of greater than 50 W and has a maximum pulse energy above 40 µJ (at 1250 kHz). This laser has a beam-pointing stability of up to ± 25 µrad/°C and is ideal for OLED processing, PCB processing, LED scribing, metal cutting, drilling and marking applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 780 nm AlGaInP Infrared Laser Diode | |
Laser Diode
from US-Lasers, Inc.
|
| The D780-5 from US-Lasers, Inc. is an AlGaInP IR Laser Diode that operates at a wavelength of 780 nm. It delivers a cw output power of 5 mW and has a slope efficiency of 0.3 mW/mA. This single longitudinal mode laser diode has a beam divergence of 11 degrees (horizontal far-field) and 35 degrees (vertical far-field). It has a rise time of 1 ns, fall time of 2 ns, and reverse voltage of 2 V. This laser diode has an index-guided MQW structure with a built-in photodiode. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 9.325 µm x 9.325 µm, CCD Linear Image Sensor for Photocopier Applications | |
CCD Image Sensor
from Toshiba Corporation
|
| The TCD2711DG from Toshiba Corporation is a CCD Linear Image Sensor that has a pixel size of 9.325 (H) µm x 9.325 (V) µm. It has 7500 image-sensing elements with a spectral resolution of 24 lines/mm and data rate of 70 MHz (color). This CCD image sensor has a sensitivity of 18.9 V/lx.s (Red), 20.4 V/lx.s (Green) and 13.4 V/lx.s (Blue). It is ideal for color scanners & photocopier applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 850 nm Silicon Photodiode for Pulse Detector Applications | |
Photodiode
from Dexerials Corporation
|
| The KPD101M32 from Dexerials Corporation is a Silicon (Si) Photodiode that operates at a wavelength of 850 nm. It has an active area of 0.81 mm x 0.81 mm and a half angle of 90 degrees. This photodiode has an open circuit voltage of 400 mV and a short circuit current of 16 µA. It is ideal for optical switches, optical encoders, pulse detectors, sensors, and industrial control applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2600 V - 3800 V, Pockels Cell Driver for Pulse Picker Control Applications | |
Pockels Cell Driver
from TEO Technology
|
| The PCD-41-3800 from TEO Technology is a Pockels Cell Driver that has an output voltage amplitude of 2600 V - 3800 V. It has a high-voltage pulse duration of 2 ns - 600 ns and high-voltage pulse repetition rate of 1000 Hz. This pockels cell driver has a rise & fall time of 2 ± 1 ns and is ideal for ultrafast optical beam modulation & deflection, control of laser regenerative amplifiers & pulse pickers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2800 V - 3800 V, EO Pockels Cell Driver for Q-Switched Laser Heads | |
Pockels Cell Driver
from Vigitek
|
| The PCDA4-01 from Vigitek is an Electro-Optical (EO) Pockels Cell Driver that has a maximum repetition rate of 2 kHz (with 4.6 mm transformer) and 5 kHz (with 9.2 mm transformer). It has a high voltage pulse width of 0.5 µs - 2 µs and amplitude of 2800 V - 3800 V. This pockels cell driver has a pulse-to-pulse instability of 5% and is ideal for actively Q-switched & hand-held Q-switched laser heads. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCB Directory | | |
|
|
|
|
|
|
|
| 532 nm - 680 nm, Raman Spectrometer for Medical & Industrial Applications | |
Spectrometer
from Zolix Instruments
|
| The Omni-iSpecT532A1 from Zolix Instruments is a Raman Spectrometer that operates at a wavelength of 532 nm - 680 nm. It has a Raman shift range of up to 4100 cm-1 and an f-number of F/2.3. This spectrometer has a grating density of 1800 lines/mm and an input & output focal length of 85 mm. It is ideal for low-pressure gas detection, confocal Raman spectroscopy, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
