| New Photonics Products this Week |
|
|
| Opto-Mechanical Software for Optimization of illumination and Optical Systems | |
Optical Design Software
from Lambda Research Corporation
|
| The TracePro from Lambda Research Corporation is an Opto-Mechanical Software that facilitates the design, analysis, and optimization of optical & illumination systems. It offers flexible solid modeling capabilities for users to import CAD & lens design files and is ideal for a wide range of applications, including lightpipe design, displays, daylighting, biomedical optics & UV sterilization. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 335.5/355 nm DPSS Laser for Imaging and Spectroscopy Applications | |
Laser
from LTB Lasertechnik Berlin
|
| The qMNL 1000 from LTB Lasertechnik Berlin are Diode Pumped Solid State Lasers that have a wavelength of 335.5 nm or 355 nm. They have a pulse energy of less than 250 µJ and pulse-to-pulse stability of up to 3%. These lasers are ideal for OEM laser source, ion trap mass spectroscopy, laser optoacoustics, detector calibration, and laser-induced bonding & cleaning applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 450 nm - 2400 nm, Supercontinuum Source for Spectroscopy Applications | |
Supercontinuum Source
from Wuhan Yangtze Soton Laser
|
| The SC-5 from Wuhan Yangtze Soton Laser is a Supercontinuum Source that has a spectral range of 450 nm - 2400 nm. It delivers a total output power above 1 W and has a repetition rate of 5 MHz. This unpolarised supercontinuum source is ideal for fiber component characterization, fiber sensing, OCT, industry inspection, and fluorescence spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.5 Megapixel CMOS Image Sensor for Automotive Applications | |
CMOS Image Sensor
from STMicroelectronics
|
| The VB56G4A from STMicroelectronics is a 1.5 Megapixel CMOS Image Sensor that has a resolution of 1124 (H) x 1364 (V) pixels. It has a global shutter that delivers a frame rate of up to 88 fps. This 3D stacked CMOS image sensor has a linear dynamic range of up to 60 dB and pixel size of 2.61 µm x 2.61 µm. It is ideal for automotive driver monitoring applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 405 nm LED Chip on Board Module for Integration Applications | |
LED
from Violumas
|
| The VC1X1C45L6-405 from Violumas is a UVA LED Chip on Board (COB) Module that operates at a peak wavelength of 405 nm. It has a wavelength accuracy of ± 5 nm and full width at half magnitude (FWHM) of 12 nm. This LED has a radiant flux of 1285 mW and radiant angle of 60 degrees. It has a forward voltage of 3.7 V and is ideal for easy testing, wiring & integration applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 560 nm Cadmium Sulfide Photoresistor for Light/Dark Switching Applications | |
Photoresistor
from Sicube Photonics
|
| The GL12537 from Sicube Photonics is a CdS Photoresistor that has a spectral peak of 560 nm. It has a photo resistance of 18 kOhms - 50 kOhms, dark resistance of 5 MOhms, and resistance illumination coefficient of 0.7. This photoresistor has a rise & decay time of 30 ms and diameter of 12 mm. It is ideal for light-sensitive detector circuits and light or dark activated switching applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1100 nm - 2000 nm, TeO2 Acousto-Optic Tunable Filter | |
Acousto-Optic Tunable Filter
from G&H
|
| The AOTF 2996-01 from G&H is a TeO2 Acousto-Optic Tunable Filter that operates at a wavelength of 1100 nm - 2000 nm. It has an active aperture of 2.5 mm and acoustic velocity of 0.68 mm/&mus. This vertically or horizontally polarised AOTF has an RF frequency of 25 MHz - 50 MHz, RF bandpass (FWHM) of 280 kHz, and maximum voltage standing wave ratio (VSWR) of 2.4:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 0.3 µm - 1.2 µm, KD*P Pockels Cell for Q-Switching Applications | |
Pockels Cell
from Leysop
|
| The EM508-512 from Leysop is a Potassium Dihydrogen Phosphate (KD*P) Pockels Cell that operates at a wavelength of 0.3 μm - 1.2 μm. It has a halfwave voltage of 6.2 kV (static) & 7.5 kV (dynamic) at 1064 nm and aperture sizes of 8 mm, 10 mm, 12 mm, 15 mm & 20 mm. This dry or fluid filled pockels cell is ideal for Q-switching and pulse-picking applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9.3/10.6 µm, Mid-Infrared Acousto-Optic Modulator | |
Acousto-Optic Modulator
from ISOMET
|
| The M1396-G40L-7 from ISOMET is a MIR Acousto-Optic Modulator that operates at a wavelength of 9.3 μm or 10.6 μm. It delivers an optical output power of up to 250 W and has a spectral range of 2.5 μm - 11 μm. This AOM has a single crystal germanium medium that produces acoustic waves with a velocity of 5.5 mm/µs and center frequency of 40 MHz. It has an active aperture area of 7 mm (H) x 14 mm (L) and input beam diameter of 3 mm & 7 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Erbium-Doped Fiber Amplifier for DWDM Applications | |
Optical Amplifier
from PacketLight Networks
|
| The PL-1000IL from PacketLight Networks is an Erbium-Doped Fiber Amplifier that has a gain of 8 dB - 40 dB. It delivers an output power of up to 23 dBm, 14 dBm & 8 dBm and has a gain flatness of ± 1 dB. This amplifier is ideal for extending the link power budget in DWDM networks, reducing regenerators along the fiber, overcoming high-loss legacy infrastructure, and supporting inline, edge & unidirectional mid-stage applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 690 nm - 1040 nm, Motorized Variable Attenuator | |
Fiber Optic Attenuator
from MKS | Newport
|
| The VA-BB-2-CONEX from MKS | Newport is a Fiber Optic Attenuator that operates at a wavelength of 690 nm - 1040 nm. It has an attenuation range above 92% and a clear aperture of 10 mm. This fiber optic attenuator has an average p-polarized extinction ratio of over 1000:1 and damage threshold of 500 W/cm2 (continuous-wave) & 2 J/cm2 (for 8 ns pulses at 1064 nm). It has a beam diameter of 5 mm - 1 mm and laser power of 100 W - 4 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1310/1550 nm Fiber Optical Circulators for Fiber Amplifier Systems | |
Fiber Optic Circulator
from AGILTRON
|
| The OCPM from AGILTRON are Fiber Optic Circulators that operate at a wavelength of 1310 nm or 1550 nm. They have a wavelength accuracy of ± 15 nm and channel isolation of 45 dB. These polarization maintaining fiber optic circulators have both slow & fast axis polarization alignment and are ideal for fiber amplifier systems, pump lasers & optical fiber sensor applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1530 nm - 1565 nm, EDFA for Seed Laser Amplification Applications | |
Optical Amplifier
from Calmar Laser
|
| The AMP-PM37 from Calmar Laser is an Erbium-Doped Fiber Amplifier with a wavelength of 1530 nm - 1565 nm. It delivers a saturated output power of 37 dBm with a small signal gain of 35 dB. This linearly polarized amplifier is ideal for seed laser amplification, C-band channel pre- or boost amplification, narrow band amplification in access or CATV networks, DWDM metro network, core network & short pulse amplification applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Resolution Videoscope for Inspection Applications | |
Borescope
from Olympus Corporation
|
| The IV9635X1N from Olympus Corporation is a Videoscope that has a field of view of 60° - 20°. It has a scope diameter of 6.2 mm and length of 3.5 m. This videoscope has an electronic power-assisted TrueFeel scope tip articulation with an articulation angle of 130°. It utilizes high-resolution CCD technology and is ideal for aviation, power generation, oil/gas/chemicals & automotive applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 Megapixel Color Mosaic Camera for Semiconductor Inspection Applications | |
Scientific & Industrial Camera
from SPOT Imaging
|
| The IN41C5IR from SPOT Imaging is a 5 Megapixel Color Mosaic Camera that has an active resolution of 2448 (H) x 2048 (V) pixels. It has a global shutter in a 2/3" optical format that delivers a frame rate above 60 fps (at 2 Mp) and 45 fps (5 Mp). This camera has a pixel size of 3.45 μm x 3.45 μm and is ideal for histology, semiconductor inspection, metrology & whole slide imaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
