| New Photonics Products this Week |
|
|
| Opto-Mechanical Software for Optimization of illumination and Optical Systems | |
Optical Design Software
from Lambda Research Corporation
|
| The TracePro from Lambda Research Corporation is an Opto-Mechanical Software that facilitates the design, analysis, and optimization of optical & illumination systems. It uses a CAD-based interface, interactive layout & optimization tools, and is ideal for a wide range of applications, including lightpipe design, displays, solar collectors, daylighting, biomedical optics, and UV sterilization. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 450 nm Fiber-Coupled Laser Diode | |
Laser Diode
from PhotonTec Berlin
|
| The M450±10-25-F100/22-B50-AP from PhotonTec Berlin is a Laser Diode with a wavelength of 450 nm. It delivers an output power of 25 W and has a spectral width of 3 nm (FWHM). This laser diode has a slope efficiency of 9.6 W/mA and power conversion efficiency of 32%. It has a core diameter of 100 μm, cladding diameter of 500 μm, and numerical aperture of 0.22. This laser diode supports an SMA fiber connector and has a fiber length of 1 m - 5 m. |
| |
Download Datasheet
Product Details | |
|
|
|
| 760 nm DFB Laser Diode for Metrology Applications | |
Laser Diode
from TOPTICA EAGLEYARD
|
| The mini DFB series from TOPTICA EAGLEYARD is a Single Frequency Distributed Feedback (DFB) Laser Diode that operates at a center wavelength of 760 nm. It delivers an output power of 4 mW - 12 mW and has a linewidth (FWHM) of 1 MHz. This continuous wave laser diode has a monitor detector responsivity of 2 μA/mW - 800 μA/mW and slope efficiency of 0.1 mW/mA. It is ideal for Yb spectroscopy and metrology applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| UV Fused Silica Laser Mirror for Yb:YAG I Harmonic Generation | |
Optical Mirror
from OPTOMAN
|
| The PP-UVFS-25.4-6.35-LLM134 from OPTOMAN is an Ultrafast Laser Mirror with a wavelength of 1030 nm (near total reflection) and 630 nm - 660 nm (partial reflectivity). It has a diameter of 25.4 mm and thickness of 6.35 mm. This UV-grade fused silica mirror has a minimum clear aperture of 20 mm and surface quality of 10-5 S-D (scratch-dig). It is ideal for Yb:YAG I harmonic generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1534 nm DPSS Lasers for LiDAR & Instrumentation Applications | |
Laser
from RPMC Lasers Inc.
|
| The KAUKAS SERIES from RPMC Lasers Inc. are Diode Pumped Solid State (DPSS) Lasers that operate at a wavelength of 1534 nm. They have a pulse width of less than 11 ns and pulse energy of up to 3 mJ. These lasers have a TEM00 spatial mode and are ideal for LiDAR, laser ranging, Laser-Induced Breakdown Spectroscopy (LIBS), metrology & instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 561 nm Visible Laser for Raman Spectroscopy Applications | |
Laser
from QD Laser
|
| The QC4LD0561-6115-yz from QD Laser is a Visible Laser that operates at a wavelength of 561 nm. It delivers an output power of 15 mW and has a power stability below 2%. This horizontally polarised laser has an RMS noise of up to 1% (at 120 kHz - 10 MHz) and polarization ratio above 12 dB. It is ideal for flow cytometry, cell sorting, laser microscopy, and Raman spectroscopy applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 515 nm Green Fiber Laser for Medical & Industrial Applications | |
Laser
from IPG Photonics
|
| The GLPP-100-1-25 from IPG Photonics is a Green Ultrafast Fiber Laser that operates at a wavelength of 515 nm. It delivers a maximum average power of 25 W and has a pulse energy of 100 μJ. This picosecond laser is ideal for precision micromachining, medical device manufacturing, microdrilling, thin metal scribing, SiC wafer processing, and solar cell structuring applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 532 nm Green Fiber Laser for Cutting & Drilling Applications | |
Laser
from MKS | Spectra-Physics
|
| The Quasar GR95 from MKS | Spectra-Physics is a Green Hybrid Fiber Laser that operates at a wavelength of 532 nm. It delivers an output power of greater than 95 W and has a maximum pulse energy above 475 μJ. This laser is ideal for glass cutting & drilling, PCB drilling, PCB cutting & depaneling, thin film planar battery cutting, and drilling & scribing MDM polymers applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 933 nm Single-Photon Source for Telecommunication Applications | |
Single-Photon Source
from Sparrow Quantum
|
| The Sparrow Core from Sparrow Quantum is a Single-Photon Source that operates at a wavelength of 933 nm. It has a source efficiency of 50% and lifetime of 300 ps. This single-photon source operates on a neutral exciton transition and has a single-photon purity of 0.1%. It is available in a quantum chip that measures 3 mm x 3 mm and is ideal for telecommunication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 810 nm Single-Photon Source for Quantum Metrology Applications | |
Single-Photon Source
from Thorlabs Inc
|
| The SPDC810 from Thorlabs Inc. is a Single-Photon Source that operates at a wavelength of 810 nm. It has a wavelength accuracy of ± 2 nm and wavelength stability of ± 2.5 nm. This single-photon source is ideal for sub-shot-noise imaging, g(2) measurements, absorption spectroscopy, quantum metrology, waveguide characterization, and quantum/telecom network applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1550 nm Single Photon Source for Quantum Communication Applications | |
Single-Photon Source
from AUREA Technology
|
| The TPS_1550_TYPE_II from AUREA Technology is a Single Photon Source that operates at a wavelength of 1550 nm. It has an output bandwidth of 600 pm and maximum pair-generation rate above 1x106 pairs/s. This quantum photon source supports polarization maintaining (PM) fibers and is ideal for quantum internet network, quantum key distribution & quantum communications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 670 nm - 855 nm, Photodetector for Offset Phase Locking Applications | |
Photodetector
from Vescent
|
| The D2-260 from Vescent is a Photodetector that operates at a wavelength of 670 nm - 855 nm. It has a bandwidth from 250 MHz to above 9 GHz and maximum input optical power (light intensity) of 1 mW. This pre-amplified detector is ideal for detecting beat notes or offset phase locking, determining the relative frequency of two lasers, and pulse timing & trigger generation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 650 nm - 850 nm, Photoconductive Antenna | |
Photoconductive Antenna
from BATOP
|
| The bPCA-100-05-10-800-h from BATOP is a Photoconductive Antenna with a wavelength of 650 nm - 850 nm. It delivers an average optical power of 10 mW and has a power density of 50000 W/cm². This photoconductive antenna has a laser source with a fluence up to 750 μJ/cm² and pulse durations of 100 fs. It has a repetition rate of 80 MHz and spot diameter of 6 μm. This photoconductive antenna has a virtual focal length of 26.5 mm and divergence angle of 17 deg. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 785 nm Semiconductor Optical Amplifier for Power Boosting Applications | |
Optical Amplifier
from Superlum
|
| The A785.15.50 from Superlum is a Semiconductor Optical Amplifier that operates at a wavelength of 785 nm. It delivers an output power of up to 50 mW and has a fiber-to-fiber gain of 23 dB. This optical amplifier has a small signal gain bandwidth of 15 nm and gain ripple of 0.2 dB. It is ideal for power boosting, active media for tunable lasers, and swept source applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 375 nm - 1550 nm, Cavity-Ringdown Reflectometer for Loss Measurements | |
Reflectometer
from UltraFast Innovations
|
| The GLACIER from UltraFast Innovations is a Cavity-Ringdown Reflectometer with a wavelength of 375 nm - 1550 nm. It has angles of incidence of 5 deg - 45 deg & 0 deg and optics sizes of 0.5 inch, 1 inch, or 2 inch (on request). This s- or p-polarized reflectometer uses diode laser as a light source and is ideal for coating loss measurement and characterization of highly reflective mirrors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.1 Megapixel CMOS Camera for Medical Applications | |
Scientific & Industrial Camera
from Canon Medical Systems USA
|
| The IK-HD5 from Canon Medical Systems USA is a 2.1 Megapixel CMOS Camera that has a resolution of 1920 (H) x 1080 (V) pixels. It has an electronic shutter in a 1/2.9" optical format and a sensitivity of F10 (at 59.94 Hz) & F11 (at 50 Hz). This camera has minimum illuminations of 4.8 lux, 4 lux, 9.6 lux, and 8 lux. It is ideal as a component of surgical microscopy, endoscopy, IR inspection, and defense imaging systems. |
| |
Download Datasheet
Product Details | |
|
